Panduit PLT2H-L Premium Cable Tie

The Panduit PLT2H-L Pan-Ty® locking cable tie delivers reliable cable bundling for commercial security, datacenter, and AV installations where consistent performance under load matters. This 8.1-inch premium tie features Panduit's one-piece locking wedge design, providing low insertion force during installation while maintaining high loop tensile strength once secured. Constructed from natural-color nylon 6.6, the PLT2H-L meets UL 62275 Type 2 and Type 21 requirements, making it suitable for both general-purpose and plenum-rated cable management applications.

Key Features

One-piece locking wedge for consistent performance and reliability across repeated installations

8.1-inch (206mm) length accommodates small to medium cable bundles in rack, tray, and conduit applications

Nylon 6.6 construction provides chemical resistance and temperature stability in indoor and outdoor environments

UL 62275 Type 2 and Type 21 compliant, UL Recognized (File #E56854), CSA Certified, RoHS compliant

Low thread force design reduces installer fatigue during high-volume cable dressing runs

50-piece standard package with 500-piece carton quantities for project-scale deployments

Panduit's Pan-Ty® locking mechanism uses a single molded wedge that engages the tie body's internal teeth, eliminating the multi-part pawl assemblies found in economy ties that can fail under vibration or thermal cycling. The light-heavy cross-section profile balances material cost against holding strength—ideal for securing CAT6A data runs, 18/2 alarm wire bundles, and fiber patch cord dressing inside equipment racks. The natural nylon 6.6 formulation resists UV degradation better than recycled-content alternatives while maintaining dielectric properties required for low-voltage wire management. At 8.1 inches, the PLT2H-L handles bundle diameters up to approximately 2 inches, fitting the majority of 12–48 conductor cable groups seen in access control panels, IP camera home-runs, and PoE switch deployments.

Integrators working under NEC Article 300.11(A) support requirements or TIA-568 cable dressing standards will find the PLT2H-L's UL Recognized and CSA Certified status simplifies inspection approvals. The tie's RoHS compliance also satisfies federal and state e-waste regulations for projects in California, New York, and other restricted-material jurisdictions. Standard packaging delivers 50 ties per bag, while carton quantities of 500 support multi-site rollouts or warehouse stock without excessive per-unit packaging waste. The PLT2H-L cross-references to over 40 competitor part numbers (including Thomas & Betts, HellermannTyton, and Erico equivalents), making it a direct drop-in replacement for most existing cable tie specifications.

For installations requiring NEC 300.22(C) plenum compliance or NFPA 90A flame-spread ratings, verify the PLT2H-L's UL 62275 Type 21 listing covers your specific application environment. The natural nylon 6.6 material handles both outdoor camera junction boxes in northern climates and equipment room cable trays adjacent to high-heat power distribution units, ensuring the same tie spec works across mixed indoor/outdoor security projects without requiring separate SKU inventories.