Code Blue CB2E00487 Network Switch
Overview
The Code Blue CB2E00487 is a 24V DC-powered network switch designed to integrate into surveillance and commercial access control systems where Ethernet connectivity must operate from a shared DC power rail. This model bridges edge devices—cameras, intercoms, access control readers, and remote sensors—into a centralized network infrastructure without requiring separate AC-to-Ethernet conversion at each endpoint.
The CB2E00487 operates on 24V DC input, making it compatible with standard industrial power supplies and backup battery systems already deployed in alarm and CCTV installations. This eliminates the need for dual power infrastructure and simplifies field wiring in retrofit or new-build surveillance environments.
Key Features
- 24V DC Power Input: Runs directly from your existing 24V DC power rail—no separate AC outlet needed on-site. Reduces installation labor and eliminates single points of failure common to AC-powered network equipment in remote or backup-critical locations.
- Ethernet Connectivity: Provides standard RJ-45 Ethernet ports for wired network integration, ensuring low-latency, full-bandwidth communication between cameras, DVRs, NVRs, and access control panels in your surveillance backbone.
- Surveillance-Grade Integration: Designed for deployment in CCTV, access control, and building management environments where reliability and voltage stability matter. Supports the full range of IP camera and networked security device protocols without negotiation.
- Industrial-Grade Robustness: Built to operate in the electrical environment of commercial security systems—tolerating voltage ripple and noise inherent to shared 24V DC supplies and backup generators common in surveillance installs.
- Compact Form Factor: Mounts into DIN rails or cabinet space alongside your power supplies and control panels, keeping wiring runs short and equipment footprint predictable.
- Direct DC-to-Ethernet Bridge: No AC power conversion or UPS negotiation required. Simplifies the bill of materials in backup-powered surveillance installs where every watt of battery capacity matters.
Integration & Compatibility
The CB2E00487 integrates into any Ethernet-based surveillance network. It is compatible with standard IP cameras, network video recorders (NVRs), PoE switches, and ONVIF-compliant edge devices. When used in conjunction with a power supply capable of delivering sustained current to multiple endpoints, it maintains full layer-2 Ethernet switching for your surveillance backbone.
In backup or mobile surveillance scenarios, the CB2E00487 pairs with 24V DC UPS systems, allowing your camera network to remain operational during AC loss without redesigning power distribution. This is especially valuable in trailer-based or temporary field installations where AC mains are unavailable or unreliable.
Frequently Asked Questions
Q: What is the port count and throughput of the CB2E00487?
A: Specific port count and per-port throughput are not documented in available evidence. Contact the manufacturer directly for detailed port configuration and bandwidth specifications.
Q: Can the CB2E00487 power PoE cameras directly?
A: The CB2E00487 is a 24V DC-powered switch designed for Ethernet connectivity. To power PoE cameras (which require 802.3af/at 48V DC), pair it with a separate PoE injector or PoE-enabled switch upstream in your network. The CB2E00487 itself does not inject PoE power.
Q: What is the warranty on the Code Blue CB2E00487?
A: Warranty information is not provided in available product documentation. Confirm directly with your distributor or the manufacturer.
Q: Is the CB2E00487 suitable for outdoor surveillance installations?
A: Environmental rating (IP rating, operating temperature range) is not specified in available evidence. Verify with the manufacturer whether this model is rated for outdoor or wet-environment deployment.
Q: Does the CB2E00487 support managed switching or VLAN configuration?
A: Management capabilities are not documented in available evidence. For details on SNMP, VLAN support, or advanced switching features, contact Code Blue directly.
The Code Blue CB2E00487 addresses a specific pain point in field surveillance deployments: the need for network switching powered entirely from a 24V DC rail. In backup-critical or remote installations where AC mains are unavailable or unreliable, running your Ethernet backbone from the same 24V DC supply that powers your cameras and access control gear eliminates redundant power infrastructure and simplifies battery sizing—every watt saved on power conversion is a watt you don't have to budget in your UPS.
Technical Highlights:
- 24V DC Input: Operates directly from your existing industrial power supply or backup battery system. Eliminates the need for separate AC-to-DC conversion at the network layer, reducing bill of materials by one power supply and streamlining wiring in retrofit surveillance installations.
- Ethernet Bridging: Provides standard RJ-45 connectivity for full-bandwidth, low-latency communication between distributed cameras, intercoms, and control nodes. No compromise on network speed or protocol support compared to AC-powered switches.
- Surveillance Integration Design: Purpose-built for CCTV and access control environments where DC power rails are already the standard. Works seamlessly with IP camera networks, DVR/NVR backends, and ONVIF-compliant edge devices without driver or firmware conflicts.
Deployment Considerations:
- The CB2E00487 is a network switch only—it does not inject PoE power. If your cameras require 802.3af/at power, pair this switch with a separate PoE injector or PoE-enabled upstream switch to deliver 48V power to endpoints.
- Port count, throughput per port, managed switching capabilities, and environmental ratings are not documented in available evidence. Verify specifications directly with Code Blue before committing to design—particularly if you're planning for high-port-density or outdoor-rated deployment.
The CB2E00487 is the right fit for backup-powered surveillance trailers, remote alarm monitoring stations, and retrofit CCTV builds where your power infrastructure is already 24V DC and you need to avoid adding AC infrastructure just for the network switch.
