Code Blue SLNF0168 4G LTE Cellular Wireless Module
Overview
The Code Blue SLNF0168 is a custom-order cellular module designed for surveillance and remote monitoring deployments where wired network infrastructure is impractical or unavailable. Built with stainless steel enclosure and rated IP68, this unit delivers 4G LTE and Bluetooth connectivity paired with PoE (802.3af) power capability. The SLNF0168 is NDAA-compliant, making it suitable for federal and federally funded security integrations where supply-chain provenance matters.
This is a specialized wireless module, not a camera or recorder—it's engineered to bridge isolated surveillance sites to a central management system when traditional hardwired network drops are cost-prohibitive or impossible. If your deployment includes remote gates, temporary monitoring stations, or sites with no existing copper or fiber, the SLNF0168 provides the connectivity layer.
Key Features
- 4G LTE cellular connectivity: Provides mobile broadband fallback or primary link to your VMS when hardwired network access is limited or non-existent. No ISP line required at the camera or recorder location—critical for rural, temporary, or mobile surveillance scenarios.
- Bluetooth (BLE) pairing: Enables short-range wireless configuration and device discovery, reducing on-site setup time for technicians. Useful for commissioning in environments where WiFi is unreliable or unavailable.
- PoE (802.3af) power input: Draws under 13W via standard 802.3af PoE, meaning a single PoE switch port or injector can power this module alongside your camera or edge recorder. No separate 12V power supply needed in most installations.
- IP68 stainless steel enclosure: Rated for full dust ingress protection and submersion up to a defined depth—suitable for outdoor cabinets, junction boxes, or harsh environments. Stainless construction resists corrosion in coastal or chemical-exposure sites where standard aluminum would degrade.
- NDAA Section 889 compliance: Meets U.S. federal procurement restrictions on certain telecommunications equipment origins. Required for any surveillance project funded by federal agencies, GSA contracts, or DoD-adjacent systems.
- Custom/Special Order configuration: The SLNF0168 is a build-to-order unit. Specifications, firmware, and carrier provisioning are tailored to your deployment. Work with your integrator to define cellular carrier, APN, failover logic, and management protocol before placing an order.
Integration & Compatibility
As a cellular bridge module, the SLNF0168 sits between your camera(s), NVR, or edge appliance and a cellular network. It is not a standalone camera or recorder—it requires a host surveillance device (IP camera, NVR, body-worn recorder, etc.) and a custom integration configuration. Typical deployments use the SLNF0168 to:
- Provide redundant 4G LTE backup when primary wired Ethernet fails, ensuring continuous cloud uplink or central office connectivity.
- Enable mobile surveillance at temporary or remote sites (construction zones, events, disaster recovery) where permanent infrastructure does not exist.
- Bridge isolated outdoor recorders or PTZ cameras to a cloud or on-premises VMS over cellular without trenching or aerial cable runs.
Integration protocol and VMS compatibility depend on your chosen surveillance platform and how the module is configured. This is a custom-order device—discuss firewall traversal, IP-table rules, DNS failover, and carrier APN settings with your systems integrator before deployment.
What's in the Box
Package contents are not detailed in available evidence. Contact your integrator or reseller for the exact contents of your specific SLNF0168 order, which may include mounting hardware, connectors, and provisioning documentation specific to your deployment.
Frequently Asked Questions
Q: Is the SLNF0168 NDAA Section 889 compliant?
A: Yes. The SLNF0168 is NDAA-compliant, making it suitable for federal procurement and federally funded projects where supply-chain restrictions apply.
Q: What power input does the SLNF0168 require?
A: The module accepts PoE (802.3af) power input, drawing under 13W. A standard PoE switch or injector can power this unit without additional power supplies.
Q: Can the SLNF0168 be used outdoors?
A: Yes. With an IP68 rating and stainless steel enclosure, the SLNF0168 is designed for outdoor deployment, including harsh or corrosive environments. However, mounting and weatherproofing of cable glands and connectors must follow site-specific installation guidelines.
Q: What cellular carriers does the SLNF0168 support?
A: The SLNF0168 is a custom-order unit. Carrier selection and APN configuration are determined during the order phase. Work with your integrator to specify your preferred U.S. or regional carrier (Verizon, AT&T, T-Mobile, etc.) and data plan.
Q: Does the SLNF0168 work with my existing VMS?
A: Compatibility depends on your VMS architecture and how the module is integrated into your network. The SLNF0168 is a connectivity bridge, not a camera or recorder itself. Discuss integration requirements and firewall configuration with your systems integrator before purchase.
Q: What is the warranty on the SLNF0168?
A: Warranty terms for custom-order units vary. Contact your reseller or Code Blue directly for warranty details specific to your SLNF0168 configuration.
The Code Blue SLNF0168 sits at the intersection of wireless redundancy and federal compliance—a pairing that matters more often than people realize. In remote or temporary surveillance deployments, a hardwired network drop is either prohibitively expensive or impossible. The SLNF0168 fills that gap with 4G LTE and Bluetooth connectivity, and it does so under NDAA Section 889 restrictions, which is non-negotiable for federal and federally funded security projects.
Technical Highlights:
- PoE (802.3af) power input: Under 13W draw means you can power this module from a standard PoE switch port alongside your camera or edge recorder. No separate 12V supply, no additional power-distribution complications—one cable from the switch does everything.
- IP68 stainless steel housing: Full dust ingress protection plus submersion rating, in corrosion-resistant stainless. Deploy this in coastal zones, chemical plants, or damp outdoor cabinets without fear of salt fog or humidity degradation.
- Custom-order configuration: Carrier provisioning, APN setup, and failover logic are configured to your exact deployment before shipment. You're not buying a generic module off the shelf—you're specifying your cellular carrier, data plan, and integration protocol upfront.
Deployment Considerations:
- The SLNF0168 is a connectivity layer, not a camera or recorder. It requires a host surveillance device to monitor—plan your architecture accordingly. If you're bridging an isolated camera back to a central NVR, the SLNF0168 handles the link; the camera and NVR do the video work.
- Cellular coverage at your site is not guaranteed. Confirm 4G LTE signal strength before committing to a remote deployment. Dead zones exist even in urban areas, and rural sites may have poor or no coverage—site survey first.
This is the right tool for temporary event surveillance, mobile monitoring units, remote gate access control, and disaster-recovery camera placement where you cannot wait for fiber or copper installation. For sites with permanent infrastructure, stick with hardwired Ethernet and reserve the SLNF0168 for redundancy or true remote/mobile scenarios.
