Code Blue CB1S00267 CB1SD Call Station Spare Part

Overview

The CB1S00267 is a factory-new spare part for Code Blue CB1SD-series emergency call stations, used to service or rebuild an existing unit rather than replace it outright. It runs on 120V AC input and supports PoE (802.3af) operation, so it fits stations wired for either local AC power or powered-Ethernet deployments. An IP68 rating on the part means it holds up against submersion, not just splash or rain exposure — relevant for call stations mounted in exposed parking structures, transit platforms, or ground-level pedestals where standing water is a real risk over the life of the install.

Compatibility

This part is designated for Code Blue CB1SD-series call stations. Confirm the exact CB1SD model and revision against your existing unit's part label before ordering — Code Blue spare parts are typically tied to specific station generations, and swapping in a part from a mismatched revision can create fit or wiring issues. If you're unsure of your station's exact configuration, cross-check the part number stamped on the enclosure or original documentation rather than guessing from the model name alone.

Installation Notes

Because this part carries both a 120V AC rating and 802.3af PoE support, verify which power path your existing CB1SD installation uses before wiring it in — mixing power schemes on a call station circuit is a common field error. The IP68 rating only holds if enclosure seals and gaskets are reseated correctly during the swap; a rushed reassembly voids the environmental protection even with a correct part. Budget for a station power-down during the swap since call stations are life-safety devices and shouldn't be serviced live.