Code Blue CB1S Sbl Cc 4-Wem Np Poe - CB1S00825

Code Blue CB1S00825 VoIP Speakerphone Tower

Overview

The Code Blue CB1S00825 is a PoE-powered VoIP speakerphone tower designed for emergency communication, area-of-refuge messaging, and facility announcements in commercial and industrial environments. This model supports 4-way audio input and can be mounted on walls, poles, recessed into structures, or installed in rack configurations — giving integrators flexibility across retrofit and new-build projects.

Built as part of Code Blue's CB1 Series tower lineup, the CB1S00825 integrates into networked VoIP systems without requiring dedicated analog audio lines or separate DC power supplies. The PoE (Power over Ethernet) design reduces installation complexity and expense by carrying both data and power over a single Cat5/Cat6 run.

Key Features

• PoE Power Delivery: Eliminates the need for a separate 24V DC supply or wall outlet near the unit. A single Ethernet cable delivers both network connectivity and power — lower labor cost during installation and less conduit to run through walls or cable trays.
• 4-Way Audio Input: Multiple audio sources can be connected simultaneously, allowing paging operators to select or mix inputs from different control stations, VoIP gateways, or emergency broadcast systems without rewiring.
• VoIP Integration: Native IP connectivity means the CB1S00825 works directly with VoIP infrastructure (PBX systems, SIP-based emergency networks, Centry® platforms, or third-party IP communication stacks) — no analog-to-digital conversion bridge required.
• Wall, Pole, Recessed, and Rack Mounting: Includes hardware for four distinct mounting orientations, supporting both surface-mounted exterior installations (pole-mount for parking lots, loading docks) and recessed ceiling or wall cavities for a cleaner indoor aesthetic. Rack mounting suits centralized equipment rooms or control centers.
• Wago Connector Standard: Ships with locking Wago Plug & Socket wire connectors (standardized by Code Blue in 2020 onward). These connectors provide a more secure, tamper-resistant connection than legacy molded plugs and reduce field rewiring time. Includes conversion kits if older molded-plug components need upgrading.
• Component Modularity: Accessories and replacement parts (strobes, lights, audio boards, faceplates) are cataloged and available separately, allowing field upgrades or repair without replacing the entire unit.

Integration & Compatibility

The CB1S00825 integrates with Code Blue's broader ecosystem: LS2000 VoIP Handset systems, IP1500/IP1501 and IP2500/IP2501 VoIP speakerphones, IA4100 analog faceplates, and Centry® touch-screen command interfaces. It also supports third-party SIP-based VoIP platforms and networked audio systems that deliver audio over Ethernet.

Because the unit pulls power from PoE, verify that your network switch has sufficient PoE budget (typically 802.3af or 802.3at per port, depending on final unit configuration) and that the switch supports the required power class. Audio input cabling uses the industry-standard Wago connectors; legacy molded connectors can be converted using the included adapter kits.

The CB1S00825 is part of the CB1 Series tower family. If you need higher output, lower-power passive audio distribution, or additional I/O for strobes and control relays, consider higher-capacity models in the CB2, CB4, CB5, or CB9 Series, which offer different form factors and power/audio configurations.

Frequently Asked Questions

Q: Does the CB1S00825 require a separate power supply?

A: No. The unit draws power directly from PoE (Power over Ethernet) via the Ethernet connection, eliminating the need for a separate 24V DC power supply or wall outlet at the installation point.

Q: Can I use the CB1S00825 outdoors on a pole?

A: Yes. The pole-mount hardware is included, and the unit is designed for outdoor deployment in standard commercial/industrial duty cycles. Verify that your installation location has adequate network cabling (shielded Cat6 recommended in harsh RF environments) and that the PoE switch has weather-rated enclosure protection if exposed.

Q: What if I have older Code Blue equipment with molded plug connectors?

A: The CB1S00825 ships with Wago conversion kits to support legacy molded-plug components. Follow the documented steps in the Code Blue installation guide: cut the molded connector, strip 9mm of insulation, twist the copper wire, and insert into the Wago socket using a small flat screwdriver. This allows mixing of old and new components without wholesale rewiring.

Q: How many audio inputs does the unit support?

A: The CB1S00825 supports 4-way audio input, allowing you to connect up to four separate audio sources (e.g., an emergency broadcast system, a VoIP gateway, a local microphone, and a backup feed).

Q: Is the CB1S00825 NDAA-compliant or FIPS-certified?

A: No compliance certifications are listed in the available product documentation. Contact the vendor or Code Blue directly if you have specific regulatory or security requirements.

Eden Phillips

The CB1S00825 is a solid choice for facilities that already have VoIP infrastructure and want to add distributed emergency communication without running separate audio and power conduits. The 4-way audio input is the key differentiator here — it means a single speaker tower can accept feeds from multiple sources (emergency broadcast system, zone-based VoIP gateways, local announcements, backup lines) without field rewiring or external audio mixers.

Technical Highlights:

• PoE Power: Single Ethernet run eliminates a separate 24V DC supply line, reducing install labor and conduit volume. Standard 802.3af or 802.3at PoE per port is sufficient for most deployments — verify your switch's per-port power budget before scaling to multiple units.
• 4-Way Audio Input: Multiple simultaneous connections mean you can route paging, alerts, and announcements from different systems without daisy-chaining or adding external audio distribution hardware. Simplifies topology design in multi-zone facilities.
• Wago Connector Standard: Locking connector design (with conversion kits for legacy molded plugs) reduces accidental disconnects in field environments and speeds component swap-outs. The included documentation for connector conversion is thorough — follow it precisely to avoid polarity errors on power inputs.

Deployment Considerations:

• Verify PoE budget on your network switch before deploying multiple CB1S units. If you're installing four or more towers, consider a dedicated PoE-capable switch or an inline PoE injector per unit to avoid exhausting switch capacity.
• The pole-mount and recessed-mount hardware are included, but outdoor installations require weather-rated Ethernet cabling (shielded Cat6) and PoE switch enclosures in exposed areas. Budget for cable conduit and weatherproofing sealant at the connector interface.

Deploy the CB1S00825 in multi-zone emergency communication systems (parking structures, manufacturing floors, distribution centers, hospitals with outdoor loading zones) where you need quick paging capability without disrupting existing analog intercom or Public Address infrastructure. Integrators familiar with SIP-based VoIP will find provisioning straightforward; check compatibility with your specific VoIP platform (Centry®, IP2500/IP1500 series, or third-party SIP) before committing to a large rollout.