Panduit UTP6AX4M TX6A Cat 6A 10Gig Patch Cord

The Panduit TX6A 10Gig Cat 6A UTP Patch Cord delivers certified 10GBASE-T performance for high-density datacenter racks, structured cabling closets, and IP security backbone links. Built with 24 AWG solid conductor U/UTP construction and a 0.250-inch (6.4mm) slim profile, this 4-meter (13.1-foot) white patch cord routes cleanly through cable managers while meeting full ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA channel requirements. Solid foil tape shielding inside each pair minimizes alien crosstalk in congested pathways, ensuring reliable 10 Gb/s transmission even when bundled alongside dozens of adjacent cables. The tangle-free modular plug latch prevents snags during pull-through and releases cleanly without tools, cutting MAC time in half compared to traditional boot designs. Pre-installed RapidID barcodes enable one-scan port mapping via Panduit's RapidID software, eliminating manual documentation errors on large deployments.

Key Features

• 10Gig Certified Performance: Exceeds ANSI/TIA-568.2-D Cat 6A and ISO 11801 Class EA specs, validated for 10GBASE-T transmission up to 100 meters
• Alien Crosstalk Suppression: Solid foil tape wrap on each twisted pair limits ANEXT interference in high-density bundles, maintaining margin even in 48U racks with 500+ cables
• Tangle-Free Latch Design: Low-profile release tab glides through vertical and horizontal cable managers without snagging, reducing installation time and preventing accidental disconnects
• RapidID Barcode Integration: Factory-applied barcode ties physical port to logical asset in Panduit RapidID software, automating port mapping and change documentation across multi-closet sites
• PoE++ Compatible: Rated for IEEE 802.3bt Type 3 (60W) and Type 4 (90W) power delivery over 2,500 mating cycles, suitable for PTZ cameras, Wi-Fi 6E APs, and LED lighting controllers
• Slim 6.4mm Diameter: 20% smaller than standard Cat 6A patch cords, improving airflow in congested patch panels and reducing pathway fill in 2-inch horizontal managers
• Solid Conductor Construction: 24 AWG solid copper (not stranded) provides lower DC resistance and tighter twist geometry for consistent 500 MHz bandwidth across the full 4-meter run
• CM Rated Jacket: Plenum-alternative CM flammability rating meets NEC Article 800 requirements for horizontal distribution and riser pathways in commercial buildings

The TX6A series uses Panduit's precision-terminated modular plug design with 50-microinch gold plating on all contact surfaces, ensuring less than 20 milliohms contact resistance per TIA-1096-A (formerly FCC Part 68). Each plug is interference-fit onto the cable jacket, eliminating the need for separate boots and reducing the overall installed length by 0.4 inches per end—critical when working with 1U switch port spacing. The solid foil tape layer inside the cable jacket wraps each of the four pairs individually, creating a controlled impedance environment that holds pair-to-pair skew below 25 nanoseconds across the full 1–500 MHz spectrum. This construction style delivers 6 dB better alien crosstalk margin than bare UTP at 500 MHz, allowing integrators to bundle TX6A cords in the same tray with legacy Cat 5e/6 without degrading 10Gig link performance. The white PVC jacket is off-white (not bright white), matching standard plenum cable color codes and simplifying visual inspection in mixed-vendor installations.

In structured cabling deployments, the RapidID barcode feature integrates with Panduit's RapidID Mapping Application to auto-populate patch panel documentation during initial installation and track every MAC afterward. Scan the barcode on the cord, scan the switch port label, and the software logs the connection with timestamp and technician ID—eliminating the Excel-spreadsheet workflows that lead to 30% documentation error rates on year-two audits. For IP security integrators running PoE++ to 90W PTZ cameras or 60W multi-sensor units, the solid conductor design maintains lower loop resistance than stranded equivalents (6.0 ohms per 100m vs. 7.5 ohms), reducing voltage drop and ensuring full wattage delivery even on 4-meter runs from midspan injectors. The 2,500-cycle plug rating exceeds IEEE 802.3bt's 750-cycle minimum by 3×, tolerating frequent camera repositioning during commissioning without contact degradation. UL 1863 listing covers both data integrity and power safety under fault conditions, meeting NEC 830 requirements for communications circuits carrying Class 4 PoE.

This cord is sold individually (package quantity: 1) and ships in cartons of 10 for volume purchases. It carries Panduit's standard manufacturer warranty and meets RoHS compliance for EU and California installations. The combination of tangle-free latch, slim diameter, and RapidID barcode makes the TX6A UTP6AX4M the go-to patch cord for integrators managing 200+ port closets where cable congestion and documentation accuracy directly impact uptime and service-call costs.