Panduit UTP6AX24BL Cat 6A 24ft Patch Cord

Panduit UTP6AX24BL Pan-Net Cat 6A UTP Patch Cord

The Panduit UTP6AX24BL delivers true 10GBASE-T performance in a 24-foot unshielded patch cord engineered for high-density data centers, enterprise switching closets, and AV-over-IP installations where alien crosstalk can degrade multi-gigabit links. Built on 24 AWG solid copper with Panduit's TX6A modular plugs, this Cat 6A patch cord exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA specifications while maintaining a slim 0.250-inch (6.4 mm) diameter—tight enough for congested pathways yet robust enough for 2,500 plug/unplug cycles and full PoE++ (IEEE 802.3bt Type 3/4) power delivery up to 90W.

Key Features

• Certified 10 Gb/s transmission over Cat 6A U/UTP construction, exceeding TIA-568.2-D and ISO 11801 Class EA
• Solid foil tape shields against alien crosstalk (AXT) in high-density bundled deployments
• Tangle-free snagless latch design prevents cable damage during moves, adds, and changes
• RapidID pre-installed barcodes enable automated port mapping and asset tracking via Panduit RapidID software
• PoE++ compliant: tested to 2,500 mating cycles with IEEE 802.3af/at/bt Type 3 & Type 4 (up to 90W)
• Slim 0.250-inch diameter and 24 AWG solid copper balance flexibility with structural integrity
• Black jacket with CM (UL 1863) flammability rating for commercial in-building risers

Alien crosstalk—interference between adjacent cables in a bundle—becomes the limiting factor in 10GBASE-T deployments once you exceed six Cat 6A cables in parallel runs. Panduit's TX6A design incorporates internal foil tape that isolates each twisted pair from external fields, maintaining signal integrity even when dozens of patch cords converge at a top-of-rack switch or fiber aggregation panel. The modular plugs exceed IEC 60603-7 contact retention specs and meet ANSI/TIA-1096-A (formerly FCC Part 68) registration requirements, ensuring compatibility with enterprise-grade switches, IP cameras with 10 Gig uplinks, NVRs, and AV matrix equipment. At 24 feet, this length bridges typical rack-to-rack or switch-to-patch-panel distances in server rooms and equipment closets without excess slack that invites cable management issues.

The tangle-free snagless latch is a field-proven advantage during MAC (moves, adds, changes) work: the boot protects the release tab from snagging on adjacent cables yet remains easy to disengage with one hand, cutting troubleshooting and reconfiguration time. RapidID barcodes come pre-applied to each cord, integrating seamlessly with Panduit's asset management ecosystem—scan the barcode at installation to auto-populate switch port assignments, cable runs, and endpoint locations in your DCIM or structured cabling database. For PoE++ installations—common with PTZ cameras, 802.11ax access points, and PoE-powered room controllers—this patch cord has been validated to deliver 90W (Type 4) across 2,500 insertion cycles, well beyond the 750-cycle minimum in the 802.3bt spec. RoHS compliance and UL 1863 CM rating satisfy procurement and code requirements for U.S. commercial projects.

This patch cord is the correct choice for integrators deploying Axis Q-line 4K PTZ cameras with 10 Gig uplinks, Ubiquiti UniFi aggregation switches, or Crestron AV-over-IP endpoints where every cable in the bundle must perform at full 10 Gb/s without crosstalk degradation. It ships in cartons of 10, simplifying bulk orders for staged builds or refresh projects, and carries Panduit's manufacturer warranty backed by decades of structured cabling leadership in mission-critical installations.