Panduit UTP6AX11BU TX6A 10Gig Cat 6A UTP Patch Cord

The Panduit UTP6AX11BU delivers certified 10GBASE-T performance in a tangle-resistant, RapidID-enabled patch cord engineered for high-density rack environments and PoE++ deployments. This 11-foot Cat 6A U/UTP cord uses 24 AWG solid conductors with internal foil tape shielding to suppress alien crosstalk while maintaining the flexible 0.250-inch diameter needed for congested cable managers. Pre-installed barcodes integrate with Panduit's RapidID port-mapping software, eliminating manual documentation during MAC work and audit cycles.

Key Features

Cat 6A U/UTP construction exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA for certified 10 Gb/s Ethernet

24 AWG solid conductors with foil tape shielding limit alien crosstalk in bundled runs

Tangle-free latch design prevents snags during deployment and provides positive tactile release

RapidID barcode system enables instant port mapping and documentation via Panduit software

0.250-inch (6.4 mm) diameter balances performance and cable-manager capacity

Rated for 2500 mating cycles with IEEE 802.3bt Type 3 and Type 4 PoE++ compatibility

CM flammability rating for horizontal distribution and in-wall installation

Unlike stranded patch cords that rely solely on wire-pair geometry for crosstalk control, the UTP6AX11BU integrates a solid foil tape barrier around the conductor bundle. This construction maintains the 500 MHz bandwidth and alien NEXT margins required for 10GBASE-T even when bundled in groups of six or more cords—a common scenario in top-of-rack switch deployments serving IP camera VLANs, NVR storage arrays, or converged PoE access points. The 24 AWG solid conductor delivers lower DC resistance than 26 AWG alternatives, improving voltage delivery to 802.3bt Type 4 devices drawing up to 90 watts at the powered device.

The tangle-free latch replaces conventional boot-and-tab designs with a low-profile, recessed release mechanism. During MAC operations in densely populated patch panels, this latch slides cleanly past adjacent connectors without snagging neighboring cords or requiring two-hand manipulation. The 11-foot length bridges typical rack-to-patch-panel spans in 42U cabinets while providing enough service loop for future retermination or device relocation. RapidID barcodes print directly on the cord body at both ends; scanning with the Panduit mobile app auto-populates port assignment, VLAN tagging, and device serial data into the site's infrastructure management database—eliminating clipboard documentation and transposition errors during large-scale camera or access-control rollouts.

The UTP6AX11BU meets ANSI/TIA-1096-A transmission requirements (formerly FCC Part 68), IEC 60603-7 mechanical standards, and UL 1863 safety certification. The 2500-cycle insertion rating exceeds the TIA-568 minimum by 5×, ensuring reliable performance in environments where devices undergo frequent hot-swap maintenance. For integrators deploying 10GBASE-T infrastructure to support 4K/8K IP cameras, high-throughput NAS storage, or Wi-Fi 6E backhaul, this cord provides the alien-crosstalk immunity and PoE power delivery that generic Cat 6 patch cords cannot reliably support in multi-cord bundles.