Ethernet & Cat6 Cables
Showing Results for Ethernet & Cat6 Cables
-
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-EL-5M-W
Ubiquiti UACC-CABLE-PATCH-EL-5M-W Patch cable with 2.5 GbE
5m nano-thin patch cable with 2.5 GbE and Etherlighting
- Delivers full 2.5 GbE throughput over 5 m, eliminating bottlenecks on multi-gig links.
- Nano-thin RJ-45 cable reduces bundle bulk in high-density patch panels and tight racks.
- White Etherlighting finish simplifies cable tracing during installation and moves/adds/changes.
$10.99The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-EL-8M-W
Ubiquiti UACC-CABLE-PATCH-EL-8M-W 2.5 GbE Patch Cable
26m white 2.5 GbE patch cable with Etherlighting for UniFi networks
- Delivers 2.5 GbE throughput to support high-bandwidth UniFi APs and IP cameras.
- 26 m length eliminates mid-span patch panels on extended rack and facility runs.
- Etherlighting LEDs on RJ-45 connectors provide instant link-status feedback during installs.
$14.99The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-EL-C6A-0.15M-W
Ubiquiti UACC-CABLE-PATCH-EL-C6A-0.15M-W Ultra-Thin Braided Patch Cable
Ultra-thin Cat6A patch cable for 10 Gbps rack interconnects in tight spaces
- Cat6A rated for 10 Gbps throughput, supporting full-bandwidth backbone links.
- 0.15 m length eliminates slack and connector stress in switch-to-NVR direct runs.
- Ultra-thin braided profile reduces bundle diameter, keeping dense patch panels navigable.
$4.99The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-EL-C6A-12M-W
Ubiquiti UACC-CABLE-PATCH-EL-C6A-12M-W Ultra-Thin Braided Patch Cable
Cat6A 12m ultra-thin braided cable for 10 Gbps networks, 40% less bulk
- Cat6A rated for 10 Gbps; 12 m length gives headroom well inside the 55 m limit.
- Ultra-thin braided jacket cuts cable bulk ~40%, improving airflow in dense rack runs.
- Backward compatible with Cat6/Cat5e gear, eliminating swap-out risk in mixed installs.
$28.00 $27.99 Save $0.01The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-EL-C6A-5M-W
Ubiquiti UACC-CABLE-PATCH-EL-C6A-5M-W Cat6A Patch Cable
Cat6A patch cable, 5m, ultra-thin jacket for dense rack deployments
- Cat6A-certified for 10 Gbps up to 100 m, providing headroom beyond typical 1G surveillance links.
- 5 m length suits single-cabinet and cross-cabinet runs without mid-span connectors or splicing.
- Ultra-thin braided jacket reduces patch-panel footprint, simplifying cable tracing in dense racks.
$13.00 $12.99 Save $0.01The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-EL-C6A-8M-W
Ubiquiti UACC-CABLE-PATCH-EL-C6A-8M-W Ultra-Thin Braided 10GbE Patch Cable
Cat6A patch cable, 10 GbE rated, ultra-thin braid for dense installs
- Cat6A rated for full 10 GbE throughput—no speed negotiation with NVRs or storage arrays.
- 8 m length spans typical rack rows without daisy-chaining or added failure points.
- Ultra-thin braided jacket flexes into tight trays and conduit without stressing connectors.
$18.00 $17.99 Save $0.01The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-1M-BK
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-1M-BK Outdoor Patch Cable
1M outdoor patch cable with 24 AWG copper for PoE-powered gear
- Outdoor-rated black jacket resists UV and water for exposed rooftop or pole runs.
- 24 AWG copper conductors support PoE delivery without voltage drop on short links.
- Standard RJ-45 male/male ends mate directly to any switch port or PoE injector.
$6.99The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-1M-W
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-1M-W Outdoor Patch Cable 1M
1M outdoor patch cable with UV/moisture protection and ESD shielding
- UV-resistant outdoor jacket prevents brittleness in rooftop and exposed runs.
- Integrated ESD drain wire protects switch and AP ports from electrostatic damage.
- Internal foil shielding on RJ45 connectors reduces EMI in dense RF environments.
$6.99The item has been added -
Ubiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-2M-BK
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-2M-BK UISP Patch Cable Outdoor
2M outdoor patch cable with shielded RJ45 for UISP deployments
- Weatherproof jacket and shielded RJ45 connectors resist moisture ingress outdoors.
- Integrated foil shielding and ESD drain wire protect against RF noise and discharge.
- 2 m length suits rooftop and exterior wall PoE runs without conduit protection.
$11.50 $8.99 Save $2.51The item has been added -
Ubiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-2M-W
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-2M-W Outdoor Patch Cable
2M outdoor patch cable with UV-resistant jacket for UniFi deployments
- Outdoor-rated UV-resistant jacket sustains service life in sun-exposed rooftop runs.
- Supports 10/100/1000 Base-T, delivering full gigabit throughput to UniFi access points.
- 2 m fixed length eliminates excess slack, reducing connector strain during thermal cycles.
$8.99The item has been added -
Ubiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-3M-BK
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-3M-BK Outdoor Patch Cable
3M outdoor patch cable with UV-resistant jacket for UISP deployments
- UV-stabilized outdoor jacket resists cracking and conductor exposure in direct sunlight.
- 3-meter length bridges cabinet-to-cabinet links without intermediate connectors or conduit.
- Validated for UISP equipment, eliminating pinout and impedance ambiguity in exterior runs.
$6.00 $5.99 Save $0.01The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-3M-W
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-3M-W Outdoor Patch Cable
3M shielded outdoor patch cable with UV-resistant jacket for exposed deployments
- Foil shield with drain wire blocks EMI and routes ESD away from connected equipment.
- UV-resistant outdoor jacket prevents moisture ingress and sun degradation in exposed runs.
- 3 m pre-terminated RJ45-to-RJ45 eliminates field splices on roof and perimeter installs.
$10.99The item has been added -
Ubiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-5M-BK
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-5M-BK UISP Patch Cable Outdoor
5M outdoor patch cable for Ubiquiti UISP network deployments
- Outdoor-rated jacket resists UV, moisture, and temperature swings without conduit.
- 5-meter length covers mid-range rooftop and tower runs between UISP network nodes.
- Designed for UISP platform compatibility—verify connector type before deployment.
$13.99The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-5M-W
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-5M-W Outdoor Patch Cable
5M outdoor patch cable with sealed connectors for UniFi/UISP
- Outdoor-rated jacket and sealed RJ-45 connectors resist UV, rain, and temperature extremes.
- 5 m (16.4 ft) length covers roof-mounted AP and outdoor camera runs without splices.
- Plug-and-play compatibility with UniFi and UISP switches, APs, and PoE injectors.
$13.99The item has been added -
Ubiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-8M-BK
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-8M-BK UISP Patch Cable Outdoor
8m outdoor patch cable with foil shielding and ESD protection for UISP
- Foil shielding with ESD drain wire blocks EMI on rooftop and tower runs.
- 8-meter weatherproof RJ45 cable eliminates conduit on most outdoor routes.
- Rated for outdoor environments; resists moisture, UV, and temperature swings.
$19.99The item has been added -
Ubiquiti
SKU: UACC-CABLE-PATCH-OUTDOOR-8M-W
Ubiquiti UACC-CABLE-PATCH-OUTDOOR-8M-W Outdoor Patch Cable
8m outdoor patch cable with RJ-45 termination for UniFi deployments
- 8m (26 ft) outdoor-rated run eliminates mid-span connectors between APs and switches.
- UV- and moisture-resistant jacket withstands temperature cycling without conduit.
- Pre-terminated RJ-45 both ends reduce field errors and speed up on-site installation.
$19.99The item has been added
Ethernet & Cat6 Cables
Cat5e, Cat6, and Cat6A Ethernet cables for IP surveillance and network infrastructure cabling. Bulk spools, pre-terminated patch cables, and outdoor-rated direct-burial options support PoE delivery and Gigabit data across horizontal and riser runs.
Plan Your Deployment
- Select cable category: Cat5e for basic PoE, Cat6 for 1G/PoE+, Cat6A for 10G/PoE++ at full distance
- Specify riser (CMR) or plenum (CMP) jacket rating per building code and pathway type
- Evaluate shielded (STP/FTP) vs. unshielded (UTP) based on EMI proximity and crosstalk risk
- Confirm outdoor-rated or direct-burial jacket for exposed and underground cable paths
- Calculate cable quantities from run lengths plus 10-15% service loop and waste allowance