ELO Touch E185034 E-Series Type C to C CFD Cable Kit

Overview

The ELO Touch E185034 is a cable kit designed for E-Series touch display systems, providing USB Type C to Type C connectivity with CFD (shielded) construction. This kit addresses the need for reliable, factory-spec cabling in environments where touch display panels must communicate with host systems or peripherals without signal degradation or cross-talk from electromagnetic interference. The E185034 is purpose-built for E-Series installations where native connector compatibility is required.

Compatibility

The E185034 cable kit is designed specifically for ELO Touch E-Series display models. Verify your display's connector type and firmware version before ordering — E-Series product lines use standardized Type C interfaces, but configuration varies by model generation. If your display ships with a non-CFD or legacy connector type, this kit will not be compatible. Contact your system integrator to confirm your E-Series model revision before deployment.

Installation Notes

Type C connectors are keyed for single-orientation insertion — no reversal needed. Ensure the cable is routed away from high-current power lines and motor controllers to minimize EMI coupling. The CFD shielding requires proper grounding at the display enclosure; leave shield termination hardware in place. Avoid sharp bends or crimping of the cable jacket during installation, as the Type C connector is compact and tight routing can degrade contact reliability over time.

What's in the Box

• 1x ELO Touch E-Series Type C to Type C CFD cable kit