Middle Atlantic C324SINGLECOVERBLACK - C3-24-SCVR-BK

Middle Atlantic C3-24-SCVR-BK Credenza Single Display Cover, Black

Overview

The Middle Atlantic C3-24-SCVR-BK is a purpose-built steel cover designed to conceal a single display mount within Middle Atlantic's 24-inch C3 Credenza platform. At 26.5 inches tall and just 1.4 inches deep, it closes out the front face of a credenza bay cleanly — no exposed brackets, no visible cabling, no ad hoc panel work. If you're integrating a credenza console for a command center, NOC, or executive briefing room and need a clean presentation finish without a custom fabrication order, this is the part that closes out the job.

The C3-24-SCVR-BK ships factory-finished in black texture powder coat over steel construction — the same durable finish used across the Middle Atlantic credenza and rack furniture line. It's not a cosmetic veneer; steel construction means it holds its shape under repeated handling and doesn't warp or discolor in environments with variable temperature or humidity.

Key Features

• Magnetic Mounting: The cover attaches magnetically rather than with fasteners — so technicians can pull the panel for access without tools, then reseat it flush. In live operations environments where display positions get adjusted post-installation, that's a meaningful difference over screw-retained covers that slow down every change.
• Steel Construction with Powder Coat Finish: 18-gauge equivalent steel with black texture powder coat gives this panel the surface durability to survive repeated removal and reinstallation cycles without chipping, scuffing, or deforming. The texture coat also masks minor contact marks that a gloss finish would telegraph immediately.
• 26.5-Inch Panel Height: Matched to the vertical bay height of the 24-inch C3 Credenza base series — covers the full display mount zone without trimming or shimming. Mis-sized panels are a common integration headache; this part is dimensioned to the base series it's specified for.
• 1.4-Inch Depth Profile: At 1.4 inches (3.6 cm) of added depth, the cover doesn't push the credenza footprint beyond the standard envelope. Floor space is at a premium in control rooms and dispatch centers; a cover that adds 3–4 inches of depth forces furniture repositioning. This one doesn't.
• Single-Display Configuration: Designed for one display position per cover. Multi-display bays require additional cover panels — plan accordingly during bill-of-materials review for larger credenza configurations.
• Mounting Hardware Included: Ships with the hardware needed for installation — no separate hardware kit to source. That matters on jobs where procurement has to track every line item separately.
• 4 lb Panel Weight: Light enough for a single technician to handle during positioning and seating, which is relevant in overhead or tight-access bay configurations.

Integration & Compatibility

The C3-24-SCVR-BK (often searched as C3 24 SCVR BK) is specified for the 24-inch C3 Credenza base series from Middle Atlantic. It is not a universal fit — verify your credenza base model before ordering. The C3 platform is a modular furniture system commonly deployed in AV furniture and control room console builds alongside rack enclosures and display mounts. If your credenza is a different width or series, source the cover dimensioned to that configuration. The magnetic attachment system is specific to the C3 platform's magnetic receiver points — it will not retrofit to non-C3 credenza furniture.

For integrators specifying a complete control room furniture build, this cover pairs with the C3 display mount assemblies and credenza top surfaces from the same product family. Coordinate the cover quantity with the number of display bays in the credenza run — one cover per display position.

Frequently Asked Questions

Q: What credenza series is the C3-24-SCVR-BK compatible with?

A: The C3-24-SCVR-BK is designed for Middle Atlantic's 24-inch C3 Credenza base series. It is not a universal fit — verify your credenza width and series before ordering.

Q: Does the cover require tools to remove once installed?

A: No. The C3-24-SCVR-BK uses magnetic mounting, so it attaches and detaches without fasteners or tools. This allows quick access to the display mount behind the panel during post-installation adjustments.

Q: How many displays does this cover panel accommodate?

A: One. The C3-24-SCVR-BK is a single-display cover. Multi-display credenza configurations require one cover panel per display bay.

Q: What is the finish on the C3-24-SCVR-BK?

A: Black texture powder coat over steel. This finish is durable against repeated handling and does not show contact marks as readily as a gloss coat.

Q: Is mounting hardware included with the C3-24-SCVR-BK?

A: Yes, mounting hardware is included in the box.

Q: What are the dimensions of the C3-24-SCVR-BK?

A: The panel is 26.5 inches tall and 1.4 inches deep. It weighs 4 lbs. Width is not published in the available evidence — confirm against your credenza bay opening before ordering if clearance is tight.

Jerry Tildsen

The C3-24-SCVR-BK does one specific job: it closes out the display bay on a 24-inch C3 Credenza with a tool-free magnetic panel that sits 1.4 inches proud of the furniture face. That magnetic attachment detail is the spec I always point integrators to — on a working NOC or dispatch console where display positions get reconfigured after go-live, a screw-retained cover becomes an obstacle. Magnetic means a technician can pull it bare-handed in seconds, reposition the mount behind it, and reseat the cover without leaving the room to find a screwdriver.

Technical Highlights:

• Magnetic Mounting: Tool-free attachment and removal — no fasteners, no panel damage during repeated access cycles in live operations environments.
• Steel + Powder Coat: Black texture powder coat over steel construction holds up to the repeated contact a credenza cover takes in a staffed console environment; texture coat hides minor scuffs a gloss finish would show immediately.
• 1.4-Inch Depth: Only 3.6 cm of added depth keeps the credenza footprint within the standard envelope — relevant in control rooms where furniture is positioned to a millimeter against sightline and egress requirements.

Deployment Considerations:

• This cover is dimensioned for the 24-inch C3 Credenza base series specifically — confirm your credenza model number before ordering. The C3 platform is modular, and covers are not interchangeable across width variants.
• The panel covers one display position. On a multi-bay credenza run, you'll need one C3-24-SCVR-BK per display bay — it's easy to under-specify this on a long console and come up short at punch-out.

Best fit: control room and dispatch console builds using the 24-inch C3 Credenza platform where post-installation display adjustments are expected and clean finish-out is a client deliverable — particularly in corporate SOCs, municipal dispatch centers, and broadcast control environments where the furniture is client-visible.