Middle Atlantic C3 1BAY 32H Woodkit - C3K1D1MHZ1Z2B20014

Middle Atlantic C3K1D1MHZ1Z2B20014 1-Bay 32U Rack Enclosure Wood Kit

Overview

The C3K1D1MHZ1Z2B20014 is a wood trim kit designed for Middle Atlantic's C3-series rack enclosures in a single-bay, 32U configuration. Wood kits in this product family apply finished hardwood side panels to the exterior of the enclosure, converting a utilitarian equipment rack into a piece that integrates cleanly into boardrooms, executive offices, reception areas, and other finished commercial interiors where exposed metal rack frames are not acceptable. If your C3 enclosure is destined for a client-facing space rather than a back-of-house IDF closet, this kit is the correct finishing component. The C3 series is a Middle Atlantic furniture-grade line purpose-built for AV and security equipment deployments in occupied spaces — the wood kit is an optional aesthetic finish, not a structural element.

Compatibility

This wood kit is sized and configured specifically for the Middle Atlantic C3 series, 1-bay, 32U height enclosure. Middle Atlantic's C3 enclosure line spans multiple bay counts and rack unit heights; wood kits are not interchangeable across configurations — a 2-bay or 45U enclosure requires its own corresponding kit. Verify your C3 enclosure's bay count and height before ordering. This kit is not compatible with Middle Atlantic's MW, WRK, or BGR series enclosures, nor with third-party rack furniture. If you are configuring a complete rack enclosure system, confirm the base enclosure model against Middle Atlantic's C3 configuration matrix. For integrators sourcing matching accessories, review the full rack accessories category for complementary trim, door, and panel options within the C3 family.

Installation Notes

Wood kits for Middle Atlantic C3 enclosures attach to the enclosure's side panel mounting points using the hardware supplied with the base enclosure or the kit itself. Panels are finished components — avoid contact with solvents, abrasive cleaners, or tools that can mar the surface during installation. Install the wood kit after all rack equipment is mounted and cabling is dressed, since panel removal after final installation can scuff finished surfaces. For AV and security equipment rack deployments in humidity-controlled interiors only — wood panels are not rated for high-humidity or outdoor environments.