ENET Solutions C13C14-PLBK-4F-ENC Locking Power Cord

Overview

The ENET Solutions C13C14-PLBK-4F-ENC is a 4-foot black locking power cord designed to prevent accidental disconnections in critical systems. It features a C13 connector on one end, typically for device power input, and a C14 connector on the other, which mates with standard IEC C13/C14 power inlets found on many network devices, servers, and surveillance equipment. The integrated P-Lock mechanism ensures a secure connection, vital for environments where vibration or movement could otherwise cause power loss. This cord is rated for 10 Amps at 250 Volts and uses an 18/3 AWG SVT cable construction, providing durability for commercial deployments.

Compatibility

This power cord is compatible with any device featuring a standard IEC C14 power inlet and any power distribution unit (PDU) or outlet with a standard IEC C13 receptacle. It is specifically suited for use with network switches, NVRs, servers, and other IT or surveillance hardware that requires a secure power connection to maintain uninterrupted operation. The P-Lock feature is designed to engage with compatible C13 receptacles, providing a positive locking action.

Installation Notes

Ensure the P-Lock mechanism is fully engaged by pushing the C13 connector firmly into the C14 inlet until it clicks. To disconnect, depress the locking tab on the C13 connector before pulling it free. The 18/3 AWG SVT cable is rated for 10A/250V, exceeding typical power draw for most IT and surveillance devices, but verify your specific equipment's power requirements against the cord's rating. Use in environments within standard temperature and humidity ranges for indoor electronics.