-
Pelco
SKU: UEBP4AA
Pelco UEBP4AA ULISSE EVO Parapet Bracket Hi-PoE
Parapet bracket for ULISSE EVO PTZ cameras with integrated Hi-PoE
- Hi-PoE (4-pair) RJ45 connector powers ULISSE EVO PTZ without external supplies
- Built-in alarm inputs and relay outputs eliminate external wiring adapters
- RAL 9002 off-white finish for discrete mounting on parapets and flat surfaces
Special Order · Ships in 2-3 weeks$215.99The item has been added -
Pelco
SKU: NXCTPG13SS
Pelco NXCTPG13SS PG13.5 Stainless Steel Cable Glands
PG13.5 stainless steel cable glands for NX Series IP68 housings
- Stainless steel construction resists salt spray and marine corrosion
- IP68-rated seal compatibility maintains environmental protection at cable entry
- 2-pack PG13.5 thread design fits Pelco NX Series camera housings
Special Order · Ships in 2-3 weeks$222.99The item has been added -
Pelco
SKU: SRXV-CM
Pelco SRXV-CM Corner Mount Bracket Sarix Value
90-degree corner mount for Sarix Value dome and bullet cameras
- Covers two adjacent walls from one corner installation, reducing camera count
- IP66 / NEMA 4X rated for outdoor and harsh-condition deployments
- Works with SRXV wall mount interface and ONVIF-compatible systems
Special Order · Ships in 2-3 weeks$197.99The item has been added -
Pelco
SKU: OCTEXB3/4P
Pelco OCTEXB3/4P ATEX Barrier Cable Gland
ATEX barrier cable gland for 3/4-inch NPT hazardous area installations
- ATEX and IECEx certified for explosive atmosphere camera deployments
- 3/4-inch NPT accommodates heavier-gauge and multi-conductor cables
- Metal construction with environmental sealing for conduit-to-enclosure transitions
Special Order · Ships in 2-3 weeks$202.99The item has been added -
Pelco
SKU: SRXV2-PDMT-1001
Pelco SRXV2-PDMT-1001 Pendant Mount Bracket
Pendant mount bracket for Sarix Value 2 domes in high-ceiling spaces
- Adjustable arm lowers camera from elevated ceilings to improve resolution
- Interior cable routing through pendant stem simplifies finished ceiling install
- Compatible with Sarix Value 2 dome cameras, NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks$165.99The item has been added -
Pelco
SKU: NXCW
Pelco NXCW Corner Mount Adapter NX Series
90-degree corner mount adapter for NX Series camera positioning
- Fits three NX bracket sizes (NXWBS1, NXWBPTH1, NXWBL) with single SKU
- IP66-rated professional construction for outdoor perimeter installations
- NDAA Section 889 compliant for government and regulated environments
Special Order · Ships in 2-3 weeks$159.99The item has been added -
Pelco
SKU: UEAC
Pelco UEAC 316L Stainless Corner Adapter
316L stainless corner adapter for ULISSE EVO cameras in corrosive environments
- Marine-grade 316L stainless steel resists chloride and crevice corrosion
- Angular offset corner mount designed for ULISSE EVO Series camera placement
- NDAA Section 889 compliant for regulated security deployments
Special Order · Ships in 2-3 weeks$155.99The item has been added -
Pelco
SKU: USB-AC56-NA-MSI
Pelco USB-AC56-NA-MSI USB WiFi Adapter
USB 802.11ac WiFi adapter for MSI Media Station field deployments
- 802.11ac wireless connectivity via USB 2.0 for MSI workstations without integrated WiFi
- NDAA Section 889 compliant for government and regulated surveillance installations
- Suited for temporary deployments and mobile command vehicles where wired Ethernet is impractical
Special Order · Ships in 2-3 weeks$170.00 $125.99 Save $44.01The item has been added -
Pelco
SKU: SM-IWPBBES-3235
Pelco SM-IWPBBES-3235 Surface Mount Riser
Surface mount riser for IBP3BBAP-ES bullet camera with IWP wall mount
- Precision mechanical interface ensures proper alignment and secure camera retention
- IP66 rated for outdoor surveillance deployments in harsh environmental conditions
- NDAA Section 889 compliant for government and regulated installations
Special Order · Ships in 2-3 weeks$148.99The item has been added -
Pelco
SKU: UPTWBQ2B_FLIR
Pelco UPTWBQ2B_FLIR ULISSE EVO Wall Bracket
Wall bracket for Pelco ULISSE EVO PTZ cameras, FLIR color-matched
- Handles PTZ dynamic loads with same capacity as standard UPTWBA model
- FLIR color finish integrates with thermal imaging systems in hybrid setups
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks$160.99The item has been added -
Pelco
SKU: CRNMT-1001
Pelco CRNMT-1001 Corner Mount for WLMT-1001
90-degree corner mount for heavy pendant cameras on WLMT-1001
- Positions large pendant cameras at building corners for dual-zone coverage
- Designed exclusively for WLMT-1001 bracket systems and Pelco cameras
- Requires weight verification; corner surfaces only, not flat walls
Special Order · Ships in 2-3 weeks$145.00 $106.99 Save $38.01The item has been added -
Pelco
SKU: EXHS000
Pelco EXHS000 Sun Shield 640mm Housing Accessory
640mm sun shield for EXHC housings cuts solar heat loading in hot climates
- 640mm full-length coverage reduces internal peak temperatures on south/west-facing positions
- Lowers blower demand and operational stress on camera electronics in direct sunlight
- White engineered thermal shield construction, NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks$143.27 $105.99 Save $37.28The item has been added -
Pelco
SKU: PTCC1
Pelco PTCC1 Pole Mount Adapter 80-150mm
Adjustable pole mount adapter for 80–150mm diameter poles
- Accommodates poles 80–150mm outer diameter, eliminating need for multiple adapters
- Compatible with Pelco PTCC Series cameras for straightforward installation
- NDAA Section 889 compliant for government and institutional deployments
Special Order · Ships in 2-3 weeks$140.99The item has been added -
Pelco
SKU: UPTWBA
Pelco UPTWBA Wall Bracket Internal Cable ULISSE EVO
Wall bracket for ULISSE EVO PTZ cameras with internal cable routing
- Internal cable channel protects wiring from weather and UV damage
- Surface wall-mount design for building facades and perimeter walls
- NDAA Section 889 compliant for government security deployments
Special Order · Ships in 2-3 weeks$140.99The item has been added -
Pelco
SKU: UPTWBTAB
Pelco UPTWBTAB Parapet Bracket Internal Cable
Parapet bracket for ULISSE EVO PTZ cameras with internal cable routing
- Integrated internal cable channel hides wiring for clean professional installations
- Designed for flat-roof parapet walls to position camera above roofline
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks$140.99The item has been added -
Pelco
SKU: PTACWBSQ2B_FLIR
Pelco PTACWBSQ2B_FLIR Wall Bracket FLIR Color
Wall bracket for PTAC cameras with FLIR color-matched finish
- Surface-mount design fits Pelco PTAC Series cameras
- FLIR color finish maintains visual consistency in mixed thermal/visible deployments
- NDAA Section 889 compliant for government and regulated facilities
Special Order · Ships in 2-3 weeks$151.99The item has been added -
Pelco
SKU: POE130-ATUS
Pelco POE130-ATUS 130W PoE Power Supply
130W PoE injector for high-power PTZ cameras and heated housings
- 130W single Ethernet cable delivery powers PTZ cameras with heaters and IR
- NDAA Section 889 compliant for government and regulated deployments
- Indoor installation with ventilation; North American power cord included
Special Order · Ships in 2-3 weeks$135.79 $99.99 Save $35.80The item has been added -
Pelco
SKU: IRHPS120
Pelco IRHPS120 120Vac Power Supply for IR Camera Housing
120Vac to 24Vac power supply for IR camera housings, North American only
- 30W regulated 24Vac output powers heater, blower, illuminator, and camera
- 120Vac 50/60Hz input with NDAA Section 889 compliance for regulated deployments
- Indoor installation near camera location with 1-year manufacturer coverage
Special Order · Ships in 2-3 weeks$131.13 $96.99 Save $34.14The item has been added -
Pelco
SKU: IRHPS230
Pelco IRHPS230 Power Supply 230Vac IR Housing
230 Vac power supply for Pelco IR housings in Europe and Asia-Pacific
- Converts 230 Vac 50/60 Hz to 24 Vac at 30 W for simultaneous IR, heat, blower
- Single integrated supply for Pelco IR camera housings with IP66 rated enclosure
- Sized for commercial surveillance in regions outside North America with 230 Vac standard
Special Order · Ships in 2-3 weeks$131.13 $96.99 Save $34.14The item has been added -
Pelco
SKU: OHEPOWINJ
Pelco OHEPOWINJ Hi-PoE Injector for OHE Housing
Hi-PoE injector for Pelco OHE outdoor housings with heating/cooling
- Exceeds standard 30W PoE+ to support cameras with heaters, blowers, IR
- Single Ethernet cable carries both power and data to outdoor housing
- Indoor IT closet mount; NDAA Section 889 compliant for government use
Special Order · Ships in 2-3 weeks$131.13 $96.99 Save $34.14The item has been added
Pelco
PELCO PRODUCTS
Pelco has been engineering enterprise surveillance equipment since 1957 and remains a reference brand for critical infrastructure, transit, gaming, and large-format commercial installations. Pelco's Spectra PTZ platform and Sarix IP camera line set the standard for long-duty-cycle rugged surveillance, now backed by Motorola Solutions' global service network.
We stock the Spectra Enhanced 7 PTZ line, Sarix Professional and Enhanced IP fixed cameras, Sarix Multi Pro multi-sensor, VideoXpert VMS software and storage, plus legacy encoders for analog-to-IP migrations. Every Pelco product ships with Motorola Solutions' manufacturer warranty and access to Pelco's full commissioning and service network. Our engineers help with VideoXpert architecture sizing, PTZ patrol programming, and Sarix series specification for transit, casino, airport, and infrastructure buyers on 20+ year asset cycles.
