i-PRO

i-PRO

SKU: MC-921PTNNEK00000

I-Pro Rdr RPK40 Multiclass Se Rev E Kpd Std - MC-921PTNNEK00000

• Reads 125 kHz prox and 13.56 MHz iCLASS SE/MIFARE in one device, eliminating reader swaps during migration.
• Wiegand, RS-485, and OSDP outputs ensure compatibility with virtually all commercial access control panels.
• Rated –30°C to +65°C with NDAA compliance, supporting exterior installs in regulated federal environments.

i-PRO

SKU: WVCS5C

i-PRO WVCS5C Clear Dome Cover for SC588

• Clear acrylic dome preserves 1 MP image quality with no optical distortion.
• PoE (802.3af) power delivery eliminates dedicated electrical runs during installation.
• Supports wall, ceiling, pendant, and rack mounts for flexible SC588 deployment.

i-PRO

SKU: SPCA932/2

i-PRO 2M Cable F/GPUS932 Series HD Cameras - SPCA932/2

• Purpose-built 2 m cable ensures signal integrity for GPUS932 Series HD cameras.
• Factory-terminated, manufacturer-keyed connectors eliminate field termination errors.
• NDAA compliant; compatible across the full i-PRO GPUS932 camera family.

i-PRO

SKU: VITRAN-BAS-INSTL

I-Pro For School Bus Car Or Single Cabin - Vitran-Bas-Instl

• Covers mounting, wiring, and configuration for school bus or single-cabin deployments.
• Handles 12V/24V power integration with proper fusing for mobile electrical systems.
• Includes GPS, event trigger setup, and ignition-cycle verification for ViTRAN systems.

i-PRO

SKU: MX-O-SMA-S-6D016

i-PRO MX-O-SMA-S-6D016 Sensor Module Fisheye Camera

• 180° fisheye FOV from a single 1 MP sensor reduces camera count in open areas.
• IP66-rated housing withstands dust and water jets for indoor or outdoor deployment.
• 802.3af PoE eliminates auxiliary power supplies, simplifying multi-camera cabling.

i-PRO

SKU: TGS-3DP-T20F

i-PRO 20 Feet Trigger Cable - TGS-3DP-T20F

• 20 ft (6.1 m) run eliminates field splicing between camera and control devices.
• Manufacturer-keyed connectors ensure correct pin mapping with i-PRO alarm I/O.
• NDAA compliant; verified for i-PRO/Panasonic HD camera and accessory systems.

i-PRO

SKU: PQKV10062Z

i-PRO Front Cover - PQKV10062Z

• Genuine OEM part restores original IP rating and weatherproof seal integrity.
• Exact factory tolerances ensure proper gasket compression and lens alignment.
• Powder-coated stamped steel/aluminum construction provides UV-resistant durability.

i-PRO

SKU: PGWD1901ZAC1

i-PRO Cable with Connector - PGWD1901ZAC1

• Factory-terminated connector eliminates field crimping errors and reduces callbacks.
• NDAA compliant design suits federally sensitive and government facility deployments.
• Compatible with i-PRO/Panasonic HD camera systems for interface, power, and signal runs.

i-PRO

SKU: PGHG1191ZAC1

i-PRO Gasket for Dome Cover **Check Pricing with - PGHG1191ZAC1

• EPDM rubber construction restores IP66 enclosure integrity on i-PRO dome housings.
• OEM fit eliminates compatibility risk during scheduled maintenance or warranty repairs.
• Prevents moisture ingress and lens fogging caused by compressed or UV-degraded seals.

i-PRO

SKU: MC-920PHRNEK00004

i-PRO RDR RP40-H Pivclass SE E LF STD HF - MC-920PHRNEK00004

• Reads both 125 kHz LF and 13.56 MHz HF credentials from one unit, easing migration.
• OSDP, RS-485, and Wiegand outputs integrate with virtually any access control panel.
• NDAA-compliant and rated –30°C to +65°C for secure indoor or protected exterior installs.

i-PRO

SKU: PARI-3179

i-PRO Lind Universal Radar Interface - PARI-3179

• Bridges radar sensors to i-PRO PTZ cameras for automated slew-to-cue without custom scripting.
• Supports multiple simultaneous radar inputs to coordinate full perimeter coverage from one device.
• Configurable detection filtering reduces nuisance alarms, keeping operator attention on real threats.

i-PRO

SKU: MC-150/250-2C83D-2

i-PRO Powersupply: - MC-150/250-2C83D-2

• Selectable 12V DC / 24V AC output powers mixed camera deployments from one unit.
• 250W / 10A capacity supports multi-camera loads without separate per-device supplies.
• NDAA-compliant, rated –20°C to +49°C for outdoor and commercial 24/7 installations.

i-PRO

SKU: M-PTZ PENDANT

i-PRO M-PTZ PENDANT Pendant Mount for M-200-P

i-PRO

SKU: MR-MRSHROUD-2

i-PRO Outdoor Housing Shroud for Compact Dome - MR-MRSHROUD-2

i-PRO

SKU: 3HP001179CAD

i-PRO Dome Cover for WVQ155S - 3HP001179CAD

• OEM polycarbonate dome preserves IR transmission and optical clarity for WVQ155S.
• IK08 impact rating withstands physical abuse in public-facing or high-traffic spaces.
• NDAA-compliant drop-in fit uses existing hardware; no recalibration required.

i-PRO

SKU: A-34-CAP METAL

I-Pro Metal Cap For A-14 And A-34 - A-34-CAP METAL

• Metal construction resists UV degradation and temperature cycling unlike plastic caps.
• Seals unused conduit entries on A-14 and A-34 junction boxes against moisture and debris.
• Powder-coated finish matches i-PRO mounting hardware for a consistent installation look.

i-PRO

SKU: MC-T3MB755K1D

i-PRO MC-T3MB755K1D Altronix T3MB755K1D

• Selectable 12V DC or 24V AC output at 6A/150W covers mixed camera deployments.
• NDAA-compliant enclosed cabinet rated to -20°C–+49°C for harsh outdoor installs.
• Single 115V AC input feeds multiple outputs, reducing conduit runs to camera clusters.

i-PRO

SKU: A-46-PM

i-PRO A-46-PM Pendant Mount for ADVIDIA Cameras

• IK10-rated housing withstands 20J impact, protecting installs in high-traffic areas.
• Pendant design clears ceiling obstructions for clean sightlines in corridors and atriums.
• Rated −30°C to 60°C, supporting reliable deployment across indoor and covered outdoor sites.

i-PRO

SKU: MC-150/250-2C83D

i-PRO Powersupply: - MC-150/250-2C83D

• Selectable 12V DC or 24V AC output at 10A supports mixed camera and access control loads.
• 250W enclosed cabinet supply centralizes power for multi-camera arrays beyond PoE range.
• NDAA-compliant design rated –20°C to +49°C suits outdoor closets and perimeter enclosures.

i-PRO

SKU: NVR-SFL-1-4TB-V8

i-PRO SFL-1 4TB Network Video Recorder - NVR-SFL-1-4TB-V8

Intel Core 1U NVR with 4TB storage for mid-scale IP surveillance

• 16GB RAM handles multi-stream ingest and real-time analytics processing
• 4TB integrated HDD with microSD expansion for extended retention periods
• Windows Server 2025 Standard with Active Directory integration for enterprise deployments