Honeywell

Honeywell · CK67-X1N-58A1A1G

Honeywell CK67-X1N-58A1A1G Rugged Mobile Computer

5G/WiFi 6E handheld for warehouse & logistics with IP65 durability

• Qualcomm QCS4490 octa-core with 6 GB RAM handles real-time barcode capture
• 5G Sub-6/mmWave + WiFi 6E for low-latency data transmission in high-volume ops
• IP65 rated, 2.4 m drop tested, FlexRange 1D/2D imager in dusty/wet environments

Honeywell · RT10A-L1N-37C12S0F

Honeywell RT10A-L1N-37C12S0F Rugged Tablet

10.1" rugged tablet with 4G LTE, barcode scanner, IP65 sealed

• 800-nit FHD display reads clearly indoors and direct sunlight
• Honeywell FlexRange imager scans barcodes from 10.7 m away
• 5900 mAh hot-swappable battery supports multi-shift operations

Honeywell · CN80G-L0N-6MN241F

Honeywell CN80G-L0N-6MN241F Handheld Mobile Computer

Snapdragon 660 handheld for warehouse scanning with 12+ hour battery

• EX20 near/far imager reads 1D/2D codes; 4GB RAM handles multi-app workflows
• Survives 3.0 m drops at room temp; IP65 rated for wet dock and outdoor use
• 5800 mAh battery runs full shift without recharge; 500 g weight reduces fatigue

Honeywell · AD12612

Honeywell AD12612 Auxiliary Power Supply with 2D Scanner

2D scanner with dual-voltage aux power for access control and POS

• Jumper-selectable 6VDC/12VDC output supports legacy and modern peripheral hardware from one SKU.
• Integrated 2D engine reads QR, Data Matrix, and PDF417, eliminating a separate scanner module.
• 1.2A output drives a keypad, mag-lock solenoid, or single siren without an added power module.

Honeywell · 318-051-001

Honeywell Scanning & Mobility 318-051-001 Battery Pack

5000mAh replacement battery for Honeywell handheld scanners

• 5000mAh capacity supports full-shift deployments without mid-day battery swaps.
• Direct-replacement design aligns with Honeywell scanner contacts for tool-free install.
• Verify model compatibility before ordering to ensure proper fit with your device.

Honeywell · PC45D21NA01301

Honeywell PC45D21NA01301 Thermal Mobile Computer

2D barcode scanner + thermal imaging in one rugged mobile computer

• 2D scan engine reads QR, Data Matrix, PDF417, and Code 128 without a separate device.
• Integrated thermal imaging enables temperature-based asset ID alongside barcode capture.
• 4900mAh battery sustains full-shift operation across indoor Wi-Fi-covered deployments.

Honeywell · 50113891-001

Honeywell 50113891-001 Wired Barcode Scanner

Hardwired barcode scanner for dock and warehouse stations—no battery downtime

• Wired connectivity eliminates battery cycles, ensuring uninterrupted scanning on 24/7 docks.
• Fixed or semi-fixed mounting suits permanent dock stations and inventory checkpoints.
• Integrates with WMS platforms and dock management systems via standard wired protocols.

Honeywell · 205-190-011

Honeywell 205-190-011 Wi-Fi/Bluetooth Scanner Accessory

Wi-Fi connectivity accessory for Honeywell PC45 mobile computers

• Adds 802.11 Wi-Fi and Bluetooth connectivity to compatible Honeywell PC45 mobile computers.
• Integrates directly into the PC45 platform without custom firmware or host device modifications.
• Enables real-time data transmission over enterprise Wi-Fi, eliminating cellular carrier dependency.

Honeywell · 1-040100-02

Honeywell Scanning & Mobility 1-040100-02 Gear Wheel

Replacement gear wheel for Honeywell Wi-Fi scanning devices

• OEM replacement gear wheel restores mechanical operation in Honeywell scanning devices.
• Lightweight at 0.01 lb, minimizing impact on device balance during field reassembly.
• Compatible with Honeywell Wi-Fi scanning platforms; verify model fitment before ordering.

Honeywell · SC110

Honeywell SC110 Mounting Plate

SC110 mounting plate for warehouse, vehicle, and fixed installations

• Direct SC110 fit eliminates adapters, reducing commissioning time on first install.
• Wall-mount compatible for fixed workstation, vehicle, or security station deployments.
• Rated for storage from -58°F to 158°F, supporting cold-chain and outdoor environments.

Honeywell · SC105

Honeywell Commercial Security SC105 Seismic Detector Sensor

Wired seismic detector for commercial perimeter and structural monitoring

• Hardwired alarm input eliminates wireless dependency for stable, interference-free signal.
• IP43-rated enclosure withstands dust ingress and light water spray in commercial installs.
• Operates across -58°F to 158°F storage range, suitable for harsh industrial environments.

Honeywell · SC100

Honeywell SC100 Seismic Sensor Detector

Hardwired seismic sensor for perimeter intrusion detection without wireless dropouts

• Hardwired connectivity eliminates battery cycles and RF interference on perimeter runs.
• Accepts analog or contact-closure input, compatible with Honeywell and third-party panels.
• Rated for storage from -58°F to 158°F, supporting harsh outdoor deployment environments.

Honeywell · PW5K2ENC2

Honeywell PW5K2ENC2 High-Density Enclosure

High-density wired enclosure for simultaneous multi-device charging and sync

• Wired-only architecture eliminates RF interference and reduces wireless attack surface.
• High-density enclosure consolidates multi-device charging and sync in a single footprint.
• Integrates with Honeywell mobile computing ecosystems for compatible fleet management.

Honeywell · PRO42PSU120

Honeywell Commercial Security PRO42PSU120 Power Supply

Regulated power supply for Honeywell PRO42 security systems

• Delivers regulated, stable power to PRO42 series access control and monitoring systems.
• Wired connection ensures consistent power delivery, reducing downtime across security zones.
• Designed for permanent rack or cabinet mounting in commercial and warehouse deployments.

Honeywell · PRO22DCC

Honeywell PRO22DCC Daisy Chain Wired Mobile Computer Accessory

Wired daisy chain connectivity for PRO2200/PRO3200 mobile computers

• Hardwired daisy chain topology eliminates RF dependency in high-interference zones.
• Compatible with PRO2200 and PRO3200 series — no firmware updates or bridges required.
• Persistent wired links reduce latency variance across multi-device deployments.

Honeywell · OP40HONS

Honeywell OP40HONS Proximity Reader 26-Bit Wiegand

Wiegand proximity reader for OmniProx 2.0 cards and fobs

• Outputs SIA 26-bit Wiegand, ensuring compatibility with standard third-party panels.
• Reads OmniProx 2.0 cards and fobs, so existing credentials require no re-issuance.
• Wall-mount form factor integrates directly into wired access control infrastructure.

Honeywell · OKP2N34SP

Honeywell OKP2N34SP Commercial Security Smart Card PVC

OmniProx smart card credential with local authentication for enterprise access control

• PVC format fits standard badge holders and lanyards, enabling rapid credential deployment.
• Integrates natively with OmniProx readers, eliminating middleware and protocol translation overhead.
• Embedded microcontroller authenticates locally, maintaining entry approval during network interruptions.

Honeywell · HA60WLMZI

Honeywell HA60WLMZI PTZ Wall Mt Bcket, 1.5 NPT White

• Wired connection for fixed-station integration
• Field-based operations enterprise device

Honeywell · HA60WLMB1

Honeywell HA60WLMB1 S60 Wall Mount Bracket

Wall mount bracket for Honeywell 60 Series cameras, indoor/outdoor

• Engineered exclusively for Honeywell 60 Series cameras, ensuring precise fit.
• Rated for outdoor environments, supporting both indoor and outdoor deployments.
• Ships with hardware and fasteners included, reducing installation prep time.

Honeywell · HA60PLMZI

Honeywell HA60PLMZI PTZ Pole Mount Bracket

• Wired connectivity delivers stable, uninterrupted links to security management systems.
• Backed by manufacturer warranty, reducing total cost of ownership risk on deployed units.