HID

HID · 3150RG1MNM

HID Iclass Prox Prog Iclass/prox - 3150RG1MNM

When you're migrating a legacy proximity system to iCLASS but need to maintain backward compatibility during the transition, this dual-technology

• Reads both 125 kHz prox and 13.56 MHz iCLASS SE from one mullion-mount unit.
• Wiegand output integrates with existing access control panels—no panel replacement needed.
• Rated –40 to 158 °F with potted, sealed electronics for harsh or exterior deployments.

HID · 3050PGGMN

HID Iclass 2K/2 SE Composite Prog F-gloss - 3050PGGMN

When deploying access control systems that demand both high security and durability, credential quality determines system longevity and user

• Composite PVC-PET-PVC construction resists cracking and delamination in high-traffic deployments.
• 13.56 MHz iCLASS SE SIO encoding supports secure, clone-resistant contactless authentication.
• F-gloss surface supports dye-sublimation direct printing for photo badging and custom layouts.

HID · 2424HNGGMNN

HID 32K Iclass/MIFARE 4K SR Prog - 2424HNGGMNN

When you're managing a facility with mixed credential infrastructure or planning a staged migration from MIFARE Classic to iCLASS, you need cards

• Dual 13.56 MHz chipset bridges iCLASS SE and MIFARE Classic 4K on one card.
• 32 KB programmable iCLASS memory supports SIO encoding and custom application areas.
• CR80 composite construction prints via dye-sublimation and survives –40 to 158 °F.

HID · 2123HBGGMNM

HID 2123HBGGMNM Composite Prox

When your access control deployment requires dual-technology credentials that balance physical durability with multi-application flexibility

• Dual 125 kHz Prox + 13.56 MHz iCLASS support enables phased migration without replacing legacy readers.
• 32K segmented memory (16K/2 + 16K/1) isolates access, vending, or T&A apps on one credential.
• Composite construction rated –40 to 158 °F withstands high-wear environments that crack standard PVC cards.

HID · 2122CGGNNN

HID Composite Iclass/prox 16K/16 - 2122CGGNNN

When your access control deployment spans both legacy proximity and newer iClass infrastructure, credential management becomes a migration headache

• Operates on both 125 kHz and 13.56 MHz, bridging legacy prox and iCLASS readers.
• 16K/16 iCLASS memory supports up to 16 application areas on a single credential.
• CR80 composite card accepts dye-sublimation printing for direct photo ID integration.

HID · 2120BGGSNN

HID Composite Iclass Prox 2K/2 - 2120BGGSNN

When you're deploying mixed technology environments or migrating legacy Prox systems to iClass, you need credentials that bridge both platforms

• Dual 125 kHz + 13.56 MHz operation lets one card serve both legacy Prox and iCLASS readers.
• 2 KB iCLASS memory with 2 application areas supports segmented access control data on a single credential.
• Rated –40 to 158 °F and composite-built for daily badge wear in demanding enterprise environments.

HID · 2120BGGRVR

HID Composite Iclass Prox 2K/2 - 2120BGGRVR

When you're deploying dual-technology access control across facilities with mixed reader infrastructure, credential compatibility isn't optional

• Dual 125 kHz Prox and 13.56 MHz iCLASS in one card eliminates multi-credential carry during migration.
• 2 KB iCLASS memory with two application areas supports segmented physical access and logical data storage.
• Composite PVC construction rated -40 to 158°F suits indoor/outdoor deployments with direct-print badging support.

HID · 2120BGGNVN

HID Composite Iclass Prox 2K/2 - 2120BGGNVN

When your access control deployment spans multiple legacy Prox readers and newer iClass infrastructure, maintaining separate credential inventories

• Dual 125 kHz Prox and 13.56 MHz iCLASS in one card eliminates per-user dual-credential overhead.
• 2 KB iCLASS memory with two application areas supports credential data plus auxiliary functions.
• Composite CR80 construction rated –40 to 158 °F fits standard badge printers and existing holders.

HID · 2120BGGNVM

HID Composite Iclass Prox 2K/2

Composite card with both iClass (13.56 MHz, 2K/2 memory) and 125 kHz Prox technology embedded in a single ISO ID-1 form factor

• Dual 125 kHz Prox and 13.56 MHz iClass in one ISO ID-1 card eliminates two-credential carry.
• iClass 2K/2 memory supports application data while Prox side keeps legacy readers functional.
• Glossy face accepts direct badge printing, simplifying issuance during phased reader migrations.

HID · 2120BGGNNN

HID Composite Iclass Prox 2K/2 - 2120BGGNNN

When you need a cost-effective credential that bridges legacy 125 kHz prox systems with newer iClass infrastructure, this composite card delivers

• Dual 125 kHz / 13.56 MHz operation lets one card serve legacy Wiegand and iCLASS readers.
• 26-bit H10301 format ensures drop-in compatibility with existing Wiegand access control panels.
• Composite substrate withstands -40 to 158 °F, resisting cracks in high-wear daily-carry use.

HID · 2120BGGMVR

HID Composite Iclass Prox 2K/2 - 2120BGGMVR

When your access control deployment spans legacy 125 kHz prox readers and newer 13.56 MHz iClass systems, managing two separate credential formats

• Dual 125 kHz Prox + 13.56 MHz iClass in one card eliminates per-user multi-credential overhead.
• 2 KB iClass memory with two application areas supports SIO encoding for encrypted identity data.
• Composite CR80 card is dye-sublimation printable and rated –40 to 158 °F for harsh environments.

HID · 2103PGGSN

HID 2103PGGSN Composite Programmed

Managing multi-application access across enterprise environments requires credentials that can handle diverse security zones without forcing users to

• 32K dual-zone memory (16K/2 + 16K/1) supports two independent applications on one card.
• Factory-programmed 13.56 MHz iCLASS credential deploys immediately with site-specific encoding.
• Composite polyester/PVC build survives -40°F to 158°F and resists cracking in high-wear use.

HID · 2103PGGMN

HID 2103PGGMN Composite Programmed

When you're deploying multi-application access control systems that demand both physical durability and flexible data segmentation, pre-programmed

• Factory-programmed 32K split memory (16K/2 + 16K/1) enables two isolated apps on one card.
• 13.56 MHz iCLASS contactless interface with mutual authentication secures data in transit.
• Composite CR80 body supports dye-sublimation printing and operates from -40 to 158°F.

HID · 2103HPGGSN

HID Composite Iclass SR 32K (16K/2 + 16K/1) Prog - 2103HPGGSN

When you need to migrate from legacy proximity to iClass without forcing a facility-wide controller swap or issuing entirely new cards, composite

• Dual-frequency design (13.56 MHz iCLASS + 125 kHz prox) enables phased reader migration.
• 32K memory split across three app areas supports access control, vending, and print management.
• Composite PVC/PET construction with dye-sublimation print capability suits badged deployments.

HID · 2100PGGMV

HID Composite Iclass 2K/2 Prog F-gloss F - 2100PGGMV

When you're deploying or maintaining an iClass SE or multiCLASS SE access control system, credential consistency and durability determine how often

• iCLASS card with 2K-bit memory and two application areas
• Composite PVC construction for standard indoor use
• Glossy front for print personalization and badge artwork

HID · 2100PG1SV

HID Composite Iclass 2K/2 Prog - 2100PG1SV

When you're deploying iClass access control in environments where durability matters but budget constraints exist, composite credentials offer the

• 13.56 MHz iCLASS 2K/2 memory supports site-specific encoding for access and logical security.
• Composite polyester/PVC laminate resists cracking and flexing beyond standard PVC card limits.
• Rated -40 to 158°F operational range suits outdoor badge use and temperature-variable deployments.

HID · 2100PG1SN

HID Composite Iclass 2K/2 Prog - 2100PG1SN

When your access control deployment spans legacy Prox and newer iClass readers, carrying separate credentials becomes a workflow bottleneck

• Authenticates at both 125 kHz Prox and 13.56 MHz iClass SE readers from one card.
• 2 KB memory with two application areas supports segmented access policies per deployment.
• Composite PVC/polyester build with dye-sublimation print surface suits photo-badge workflows.

HID · 2100PG1RN

HID Composite Iclass 2K/2 Prog - 2100PG1RN

• Dual-technology card reads on both 13.56 MHz iClass and 125 kHz Prox readers.
• 2 KB memory with 2 application areas supports segmented data for multiple use cases.
• Composite PVC/PET construction operates across -40 to 158°F for harsh environments.

HID · 2100PG1CN

HID Composite Iclass 2K/2 Prog - 2100PG1CN

When you're specifying credentials for mid-security access deployments where durability matters but full polycarbonate pricing doesn't fit the

• 13.56 MHz iCLASS protocol ensures reliable read range across HID-compatible readers.
• 2K/2 programmable memory supports custom encoding and multi-application credential schemes.
• Composite CR80 body rated -40 to 158°F; accepts dye-sublimation direct printing.

HID · 20TKS-T3-004XQ7

HID Signo 20,Blk/slvr,Term,CRD PFL T3-CSTM

HID's modern access-control reader, designed for the small-format door-mounted reader role with broad credential support and mobile-ready operation

• Reads 125 kHz Prox, iClass, MIFARE, DESFire, and Seos—no reader swap during migration.
• Bluetooth and NFC support enables HID Mobile Access for keyless credential rollout.
• OSDP and Wiegand outputs ensure compatibility with existing and modern access panels.