Panduit PWBWFWWH Wire Basket Waterfall, White Powder-Coated Steel, 5-Pack
Overview
The Panduit PWBWFWWH is a white powder-coated steel wire basket waterfall fitting designed to transition cables vertically out of an overhead wire basket tray and route them cleanly down to equipment racks, panels, or floor-level termination points. If you're running structured cabling or power conductors through an open wire basket system and need a code-compliant, clean vertical drop, this is the component that bridges the horizontal run to the equipment below. It ships in a pack of five, making it practical to outfit multiple drops across a run or a full row of racks in a single order.
Wire basket waterfalls are a small but consequential piece of a cable management system — a sloppy vertical drop is where cable strain, bend-radius violations, and maintenance headaches accumulate. This fitting provides a guided, structured transition that keeps conductors organized and within code-compliant bend radii from the basket to the termination point.
Key Features
- Powder-Coated Steel Construction: The PWBWFWWH is fabricated from steel with a white powder-coat finish — not painted sheet metal that chips at installation, but a durable electrostatically applied coating that resists corrosion and mechanical wear in above-ceiling and raised-floor environments. In data centers and telecom rooms where equipment churn is frequent, that durability matters over the life of the installation.
- White Finish for Plenum and Drop-Ceiling Environments: White is the standard finish for visible or semi-visible above-ceiling installations in commercial buildings. Where basket tray runs in open office or retail ceilings without a dropped tile, white blends with standard ceiling grid hardware rather than standing out as an industrial intrusion.
- NEC Section 392 and NEMA VE 1-2002 Compliance: The PWBWFWWH meets UL classification for use as an Equipment Grounding Conductor per NEC Sections 392.3(C) and 392.7(B). It also conforms to NEMA VE 1-2002 and CAN/CSA-C22.2 No.126.1-02. In plain terms: when your AHJ reviews the cable tray installation, these certifications mean the grounding continuity of the tray system through this fitting is documentable — not a gray area. That matters for project closeout and inspection sign-off.
- Pack of Five: Sold in a quantity of five per package. For a standard two-post or four-post rack row with multiple overhead basket drops, buying in a five-pack reduces per-unit cost and eliminates the nuisance of ordering individual fittings. Plan your waterfall count per rack row before ordering to avoid partial-pack overruns.
- Compatible with Panduit Wire Basket Tray Systems: Engineered to integrate with Panduit wire basket tray components, ensuring dimensional fit and consistent finish across the tray system. Mixing fitting manufacturers in a basket tray run can create grounding continuity gaps and visual mismatches — using matched components from the same product family avoids both.
- Competitor Cross-Reference CABLEXIT100WH: If you're sourcing replacements or additions to an existing installation built around the CABLEXIT100WH, the PWBWFWWH is the Panduit equivalent, allowing you to standardize on a single-vendor wire basket fitting catalog going forward.
Integration and Compatibility
The PWBWFWWH is designed for use within Panduit's wire basket tray ecosystem. Wire basket tray installations in structured cabling environments — data centers, server rooms, MDF/IDF closets, and open commercial ceilings — rely on a family of fittings (couplers, bends, tees, waterfalls) that must share consistent cross-sectional geometry and grounding path. Substituting off-brand fittings into a Panduit basket run risks dimensional mismatch and gaps in the documented grounding continuity required under NEC 392.7(B).
For cable management planning in larger facilities, account for one waterfall fitting per rack or per equipment cabinet receiving overhead basket-fed cabling. In high-density rows, a single basket run may require multiple waterfalls at staggered positions — the five-pack quantity is sized for exactly this use case.
What's in the Box
- 5x Panduit PWBWFWWH Wire Basket Waterfall fittings (white powder-coated steel)
Frequently Asked Questions
Q: What standards does the PWBWFWWH meet for use in cable tray installations?
A: The PWBWFWWH is UL Classified for use as an Equipment Grounding Conductor per NEC Sections 392.3(C) and 392.7(B), meets NEMA VE 1-2002, and conforms to CAN/CSA-C22.2 No.126.1-02 for metal cable tray. These certifications support AHJ inspection and project closeout documentation.
Q: How many units come in a package of the PWBWFWWH?
A: Each package contains five (5) wire basket waterfall fittings.
Q: What material and finish is the PWBWFWWH?
A: The PWBWFWWH is constructed from steel with a white powder-coat finish, providing corrosion resistance and durability suitable for above-ceiling and data center environments.
Q: Is the PWBWFWWH compatible with non-Panduit wire basket tray systems?
A: The PWBWFWWH is engineered for the Panduit wire basket tray system. Compatibility with third-party basket systems is not verified by the manufacturer — confirm cross-sectional dimensions match before installing in a non-Panduit tray run.
Q: What is the competitor cross-reference for the PWBWFWWH?
A: The PWBWFWWH cross-references to the CABLEXIT100WH, which is useful when sourcing replacements for an existing installation built around that part number.
Q: Can the PWBWFWWH be used as part of a grounded cable tray system?
A: Yes. The PWBWFWWH carries a UL classification specifically for suitability as an Equipment Grounding Conductor under NEC 392.3(C) and 392.7(B), meaning it can be documented as part of the grounding continuity path in a metal cable tray installation.
The PWBWFWWH is a fitting that gets overlooked during design and becomes a problem during inspection. Its UL classification for Equipment Grounding Conductor duty under NEC 392.3(C) and 392.7(B) is the spec that separates a code-documentable installation from one that's going to generate RFIs at closeout. If your project specs call for a grounded metal cable tray system, every fitting in that run — including waterfalls — needs to carry that classification, and the PWBWFWWH does.
Technical Highlights:
- UL/NEMA/CSA Certification Stack: UL Classified per NEC 392, NEMA VE 1-2002, and CAN/CSA-C22.2 No.126.1-02 — this triple certification covers U.S. and Canadian projects and satisfies most AHJ documentation requirements without a submittal fight.
- Powder-Coat Steel: Steel construction with powder-coat finish means this fitting won't deform under cable bundle weight or during installation, unlike lighter-gauge painted alternatives. The white finish matches standard Panduit basket tray in commercial above-ceiling runs.
- Five-Pack Packaging: At five units per package, this is sized for a rack row or a small IDF — not a single drop. For large data center deployments, calculate your waterfall count early; ordering in five-packs aligns with standard rack-row planning rather than requiring per-unit orders.
Deployment Considerations:
- The PWBWFWWH cross-references CABLEXIT100WH — if you're inheriting a facility with existing basket tray documentation using that part number, the Panduit equivalent drops in without requiring a full system re-spec or submittal revision.
- Grounding continuity in cable tray depends on every fitting in the run carrying the same UL grounding classification — verify all couplers, bends, and tees in your basket tray BOM meet NEC 392.7(B) before final inspection, not after.
The PWBWFWWH is the right specification for structured cabling or power distribution installations in commercial data centers, MDF/IDF rooms, and open-ceiling office environments where white tray aesthetics and NEC 392 grounding documentation are both non-negotiable project requirements.
