Axis TP3815-E Clear Dome for P37 Cameras - 02392-001

Axis 02392-001 Clear Dome for P37 Series Cameras

Overview

The Axis 02392-001 is a replacement clear dome designed specifically for Axis P37 series IP cameras. This accessory preserves optical clarity while offering environmental protection in indoor and sheltered outdoor deployments. If your P37 dome has sustained damage or degradation from dust, scratches, or environmental exposure, this replacement unit restores the camera's original image quality without requiring a full camera swap.

Key Features

• Clear Optical Path: Uncoated polycarbonate or acrylic dome material minimizes reflections and optical distortion, preserving the native resolution and color accuracy of the underlying P37 camera. Image quality does not degrade relative to the camera operating without a dome.
• Precision Fit for P37 Family: Engineered for exact compatibility with Axis P37 series models, including the AXIS P3719-PLE and AXIS P3727-PLE. Physical fit is guaranteed; no adapter plates or modifications are required.
• Durable Polycarbonate Construction: Impact-resistant material withstands accidental contact, vibration, and moderate thermal cycling. Suitable for indoor installations and covered outdoor areas where direct rain and UV exposure are limited.
• Low-Profile Mounting: Dome integrates flush with the camera's existing mounting interface. Installation is straightforward: remove the old dome, clean the mounting surface, and seat the replacement dome securely.
• Maintenance-Friendly Design: Smooth surface permits regular cleaning with soft cloths and standard optical-grade cleaning solutions. Removes dust and smudges without special tools or extended downtime.
• Cost-Effective Accessory: Significantly less expensive than replacing an entire camera when dome damage is the only issue. Extends the useful life of P37 deployments without capital expense.

Integration & Compatibility

The 02392-001 dome works with any P37-series camera already deployed on your network. No firmware updates, network configuration changes, or VMS adjustments are needed. The dome is transparent to all analytics, recording, and streaming functions running on the underlying camera. If you operate a network video recorder or VMS platform with Axis P37 cameras, swapping this dome does not affect integrations or stored footage.

When to Choose This Accessory

Select the 02392-001 if (a) you own one or more P37 series cameras with a damaged, yellowed, or scratched dome, (b) you need a same-model replacement to maintain consistent optical performance across a multi-camera installation, or (c) you want to restore a P37 camera to factory clarity without downtime. This is not a protective upgrade — it is a direct replacement for an existing damaged dome. If your P37 is operating in a harsh outdoor environment with direct sun, salt spray, or frequent impacts, expect dome material degradation over time and plan for periodic replacement.

What's in the Box

• 1 x Clear Dome

Frequently Asked Questions

Q: Will this dome fit my Axis P3718 or other non-P37 models?

A: No. The 02392-001 is engineered exclusively for P37 series cameras. P3718 and other Axis models use different mounting interfaces and dome geometries. Installing it on a non-P37 camera will not seat properly and may cause optical vignetting or physical misalignment. Verify your camera model before ordering.

Q: Does the clear dome reduce image resolution or introduce lens distortion?

A: No. The clear dome is optically passive. It does not reduce resolution, introduce chromatic aberration, or alter the camera's native field of view. Optical clarity is maintained as long as the dome surface is clean.

Q: Can I install the 02392-001 outdoors in direct sunlight and rain?

A: The dome material is UV-resistant but not designed for sustained direct sunlight or heavy rain exposure. It is rated for sheltered outdoor and indoor installations. Continuous UV exposure will eventually cause the material to yellow and become brittle. In harsh outdoor environments (full sun, heavy rain, salt spray), plan for dome replacement every 3–5 years or sooner depending on climate.

Q: How do I remove and install the replacement dome?

A: Most P37 domes are held in place by a snap-fit or threaded ring. Gently pull or unscrew the old dome, clean the mounting surface with a soft cloth, and press or thread the new dome onto the camera body until it clicks or seats flush. Consult your P37 camera's user guide for model-specific removal instructions.

Q: Is the 02392-001 (or 02392 001) available in smoked or tinted variants?

A: No. The 02392-001 is clear only. Axis does not offer tinted or smoked versions of this dome. If you require privacy screening, consider a separate privacy shield or adjust camera angle and placement.

Marty Allison

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The Axis 02392-001 is a straightforward but critical accessory if you operate P37 series cameras in any scale. A clear dome is optically transparent and does not degrade the underlying camera's 1080p or higher resolution. The moment a dome gets scratched, dusty, or yellowed — which happens within 6–12 months in indoor high-traffic areas or 2–3 years in sheltered outdoor sites — image quality drops noticeably. Rather than swap the entire camera, a replacement dome (02392-001) restores performance for a fraction of the cost.

Deployment Considerations:

• Optical Passivity: This dome introduces zero optical loss when clean. Any perceived resolution loss after installation is either dust on the dome surface or indication that the old dome was severely degraded. Clean the dome quarterly with a microfiber cloth and distilled water.
• Material Fatigue in UV-Rich Environments: Polycarbonate yellows under sustained UV exposure. If a P37 camera is mounted in direct, all-day sunlight, expect dome clarity to degrade within 3–5 years. Budget for replacement cycles; this is not a one-time install-and-forget item in harsh climates.
• Mount Verification Before Ordering: P37 domes typically use a snap-fit or threaded collar. Do not assume all P37 models use the same mounting method. Check your specific camera's installation guide to confirm the 02392-001 will seat properly.

Recommended for: multi-camera P37 deployments where dome life-cycle management is already planned, and for any single-camera site where a scratched dome is reducing image quality. Order a spare if you operate more than five P37 cameras; the 02392-001 is inexpensive insurance against downtime during maintenance windows.