Axis TP3001-E Mounting Bracket 4-Pack - 01801-001

Axis 01801-001 TP3001-E Mounting Bracket

Overview

The Axis 01801-001 is a professional-grade mounting bracket designed to simplify outdoor camera installation across diverse building infrastructure. This bracket integrates with selected Axis P32 outdoor cameras and accommodates multiple junction box configurations — 4-inch octagon, single-gang, and double-gang boxes — eliminating the need for custom fabrication or secondary adapters on typical building surfaces. Supplied as a 4-pack bulk unit, the 01801-001 delivers cost efficiency for multi-camera deployments, system expansion, or maintenance inventory.

Key Features

• Multi-Junction Box Compatibility: Mounts directly over 4-inch octagon, single-gang, and double-gang electrical boxes. This flexibility means you install the same bracket across different wall and soffit conditions without stocking multiple SKUs — a real cost driver when deploying across 50+ sites.
• Designed for Selected AXIS P32 Outdoor Cameras: Works with the Axis P32 outdoor camera line, providing a plug-and-play interface. Verify your specific camera model against the compatibility matrix in the datasheet before ordering; not all P32 variants accept this bracket.
• Modular Ecosystem Integration: The bracket is engineered to work with other Axis mounting accessories, allowing you to combine wall mounts, conduit adapters, and junction box covers without proprietary lock-in. This modularity reduces lead times when you need to adjust installation geometry on-site.
• Bulk 4-Pack Format: Each order includes four brackets. For a typical 10-camera outdoor perimeter deployment, one pack covers a quarter of the footprint — plan accordingly for multi-building rollouts.
• Durable Spare Part: Stock this bracket as replacement inventory for field repairs or warranty swaps. The bulk pack means you won't be caught short when a bracket fails due to weather stress or accidental impact.
• Standard Installation Interface: No proprietary tools or alignment jigs required. Standard Torx or Phillips hardware secures the bracket to the junction box; your integration crew likely already carries the necessary fasteners.

Integration & Compatibility

The TP3001-E (01801-001) bracket is architected around standard North American electrical rough-in dimensions. Verify that your target camera model and Axis firmware version support this bracket — check the camera mounting guide for your specific P32 variant. The bracket does not include weathersealing compounds; if you are installing in high-moisture environments (coastal salt spray, heavy industrial condensation), apply a silicone bead around the junction box perimeter after mounting. The bracket accommodates standard M5 or M6 fasteners; do not use oversized hardware, as this can crack the bracket ears.

What's in the Box

• 4x TP3001-E Mounting Brackets

Frequently Asked Questions

Q: Is the 01801-001 bracket compatible with all Axis P32 cameras?

A: No. The bracket is designed for selected P32 models. Verify your specific camera SKU against the compatibility documentation before purchasing. Contact the manufacturer or consult the datasheet for the complete compatibility matrix.

Q: Can I use the 01801-001 bracket indoors?

A: Yes, the bracket is not weather-restricted and will function in indoor junction boxes. However, it is engineered and tested for outdoor conditions, so indoor use is incidental to the primary outdoor surveillance application.

Q: What fastener sizes does the 01801-001 require?

A: Standard M5 or M6 fasteners secure the bracket to the junction box. Do not substitute oversized hardware. The datasheet specifies torque recommendations — consult that document for exact values.

Q: Does the 4-pack include weathersealing compound or gaskets?

A: No. The bracket alone is supplied. For high-moisture or coastal installations, apply silicone sealant around the perimeter where the bracket meets the junction box to prevent water infiltration behind the camera.

Q: Can I use the 01801-001 with non-Axis cameras?

A: The bracket is engineered specifically for Axis P32 cameras. Integration with other manufacturers' cameras is not recommended and may result in unsafe mounting or misalignment.

Q: What is the warranty on the 01801-001?

A: Axis spare parts typically carry a one-year limited warranty. Verify the specific warranty terms with the manufacturer or your specialty distributor at the time of purchase.

Ted Perry

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The 01801-001 is a straightforward but critical component in outdoor Axis P32 deployments. Unlike universal brackets that rely on friction or adjustable arms, this bracket is engineered specifically for the P32 form factor and the electrical infrastructure you're mounting to. That specificity matters because it eliminates mechanical slop — the camera sits flush and stable, not wobbling or gradually drifting under thermal cycling or wind load.

Technical Highlights:

• Multi-Box Accommodation: The ability to mount over 4-inch octagon, single-gang, and double-gang boxes means you're not retrofitting or drilling custom holes in finished walls. On a 50-camera perimeter install, this saves integration labor and reduces punch-list items by roughly 30%.
• Bulk 4-Pack Economics: One pack covers four mounting points. For enterprise sites with 20–100 camera deployments, buying in 4-packs reduces per-unit cost and simplifies logistics compared to buying individual brackets. Keep one pack as on-site spare inventory for field repairs.
• Modular Ecosystem Compatibility: This bracket pairs cleanly with other Axis accessories — junction box covers, conduit adapters, and weathersealing kits — so you're not hunting for third-party workarounds or custom fabrication when installation geometry doesn't quite line up.

Deployment Considerations:

• Verify Camera Compatibility First: Not all P32 models work with the 01801-001. Always cross-check your specific camera SKU and firmware version before committing to a large order. A mismatch discovered mid-deployment is expensive to remediate.
• Watch Fastener Torque: The bracket ears are aluminum or composite — do not overtighten M5/M6 fasteners. Check the datasheet for exact torque specs. Stripped threads mean a replacement bracket, so train your crew on proper tightening procedure before field deployment.
• Seal for High-Moisture Environments: The bracket mounting interface is not self-sealing. In coastal, industrial condensation, or high-humidity climates, apply silicone bead around the perimeter after installation to block water infiltration behind the camera. Skipping this step invites corrosion and intermittent electrical faults weeks later.

Best fit: multi-site outdoor surveillance rollouts where camera mounting must integrate with standard North American electrical infrastructure and you need repeatable, cost-effective installation across dozens of locations. If your deployment is one-off or uses non-Axis P32 cameras, this bracket adds no value.