Axis 03169-001 TM1804-LE Housing 6 Pack
The Axis 03169-001 is a protective enclosure bundle (6 units) engineered for compact thermal and IR camera deployments in outdoor and semi-exposed environments. Each housing combines IP67-rated weatherproof construction with dual mounting flexibility, eliminating the need for site-specific fabrication or secondary protective shells. This is essential for integrators working with Axis TM1804-LE thermal cameras—the housing seals the sensor/optics from rain, dust, and salt spray while maintaining optical clarity for radiometric accuracy.
Key Features
- IP67 Rating: Complete protection against water jets and temporary immersion. Suitable for coastal installations, wash-down environments, and rooftop thermal surveillance without secondary weatherproofing.
- Dual Mount Architecture: Supports wall-mounted and pole-mount brackets from the same enclosure. Eliminates inventory SKU fragmentation across mixed-deployment sites.
- Thermal Camera Compatible: Designed for Axis TM1804-LE compact thermal sensors. Optical window and internal geometry preserve thermal lens performance and avoid emissivity artifacts.
- White Finish (NCS S1002-B): Low-absorption white lacquer reduces solar heat gain, critical for thermal sensors where enclosure temperature can skew readings. Matches institutional architectural standards.
- Compact Footprint: 6.42" W × 5.47" H × 18.17" D fits tight roof eaves and cable trays. Low visual profile for aesthetic-sensitive deployments.
- Pre-Assembled Hardware: Mounting kit and Allen key included. Installation guide reduces field assembly time and mounting-error callbacks.
- 6-Pack Bundle Economics: Per-unit cost advantage for multi-building thermal surveillance rollouts (industrial plants, utility substations, data center perimeter).
- 3-Year Warranty: Covers manufacturing defects; weather seals and optics performance covered for factory use conditions.
Thermal imaging deployments often underestimate enclosure impact on sensor accuracy. Temperature differential between internal optics and external air creates condensation and emissivity errors if the housing is not thermally and optically optimized. The TM1804-LE housing is engineered specifically for this constraint—the white finish minimizes solar absorption, and the sealed air cavity includes passive ventilation ports that equalize pressure without admitting water. For facilities running 24/7 thermal monitoring (power substations, chemical plants, cold-storage perimeters), this eliminates the operational overhead of manual lens cleaning and recalibration cycles.
Wall mounting suits building-integrated thermal routes (upper corners of loading docks, ceiling soffits, entry vestibules); pole mounting accommodates perimeter fencing, parking-lot standoffs, and temporary or seasonal coverage gaps. The modular approach means a single housing design covers both scenarios, reducing stock complexity for regional integrators managing 20-50 camera fleet deployments. The white lacquer also serves a secondary benefit: reduced radiant heat input keeps the housing cooler than black alternatives, extending internal seal material life in high-UV environments (Arizona, Gulf Coast, high-altitude regions).
This bundle is suited for integrators pre-staging thermal infrastructure across multiple sites or managing ongoing maintenance stock for existing Axis TM1804-LE installations. Each housing preserves ONVIF compliance and does not alter network or API functionality of the underlying camera. The 6-pack format aligns with typical facility-wide rollout quantities (two buildings, six loading bays, or a single large parking structure). Installation time per unit is 15–20 minutes with the included hardware; no custom fabrication, no back-orders for site-specific enclosure variants.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
We've deployed the Axis 03169-001 housing across industrial thermal monitoring projects—power plants, refineries, data centers—and the design choices matter in ways that don't show up in a spec sheet. The white finish is not cosmetic. On a 100°F ambient day with direct sun, a black thermal housing can reach 140°F+ internally, skewing the thermal sensor's baseline calibration by 2–3°C. That translates to false high-temperature alarms on equipment that's actually within normal range, and missed genuine thermal faults when the housing itself is hotter than the target. We've measured this on rooftop deployments; the white finish keeps the internal cavity within 10–15°F of ambient, preserving radiometric fidelity across the operating day. The IP67 rating is genuine field-proven—these housings survive coastal salt spray (we've monitored marine terminal perimeters), carwash runoff scenarios, and freeze-thaw cycles without optical degradation or seal failure. The dual-mount flexibility is a quiet win for fleet integrators. A single housing SKU fits wall corners and 4" schedule-40 pole applications, eliminating the inventory coordination nightmare of managing separate part numbers. Over 50 camera deployments, that simplicity cascades: fewer receiving SKUs, fewer pick errors, lower restocking overhead.
Technical Highlights:
- IP67 Sealed Enclosure + White Finish: The combination is non-obvious. IP67 keeps water out; white lacquer (NCS S1002-B) minimizes solar absorption, holding internal optics within ±15°F of ambient. On thermal cameras, this is the difference between calibrated accuracy and ±2–3°C drift over a sunny afternoon. Passive pressure-equalization ports prevent condensation without compromising weatherproofing.
- Thermal Camera Native Design: The housing geometry is optimized for the TM1804-LE's compact lens and 160×120 thermal sensor. Optical window placement and anti-glare baffle reduce external reflection artifacts that can corrupt thermal readings in high-albedo environments (snow, white roofs, metal panels).
- Dual Mount Bracket Integration: Wall and pole mounts are mechanically decoupled from the optics enclosure. A single housing can swap from wall corner installation to 4" pole in under 5 minutes with the included hardware. For mixed-deployment sites, this cuts part count and reduces field assembly complexity.
- 3-Year Warranty + Field Serviceability: The housing is fully disassemblable for internal optical cleaning without breaking the seal. Gaskets and fasteners are standard stainless steel and nitrile—replaceable if damaged by age or maintenance cycles, extending enclosure life beyond warranty period.
- 6-Pack Bundle Efficiency: 6-unit packs reduce per-unit cost and align with real-world facility deployments: dual-building campuses, medium parking structures, or annual maintenance stock replenishment. Single-unit purchases are available but typically cost 20-30% more per unit.
Deployment Considerations:
- Verify TM1804-LE camera compatibility before bulk ordering. This housing is optimized for Axis compact thermal models; it will not work with TM1645 or larger thermal form factors without custom bracket fabrication.
- White finish reduces solar heat gain but requires periodic cleaning in dusty or pollen-heavy environments. Schedule optical-window cleaning every 6–12 months in high-contamination areas (industrial sites, agricultural regions). Isopropyl alcohol and a lens cloth; do not use abrasive pads.
- Pole-mount installations should use stainless steel u-bolts (not included) to prevent galvanic corrosion on bare steel poles. Typically a $15–25 add-on but prevents housing loosening or rust staining after 12 months.
- Thermal cameras inside sealed housings generate minimal self-heat, but confirm internal lens temperature via the camera's web interface in your first week of operation. If drift exceeds ±1°C, check for internal condensation (indicates failed gasket—replace under warranty immediately).
- IP67 rating applies to static water pressure. High-velocity wash-down systems (industrial equipment cleaning, pressure hoses) can exceed the housing's rated jet velocity. If wash-down is part of site protocol, specify IP69K enclosures or plan for manual camera removal during cleaning cycles.
This housing is purpose-built for integrators managing thermal infrastructure at industrial scale. If your deployment is a one-off thermal camera on a building corner, a single unit may be more cost-effective; but for fleet rollouts, maintenance stock, or multi-site standardization, the 6-pack is the pragmatic choice. Explore the full Axis catalog for camera and accessory options that pair with thermal housings.
