Axis 01996-001 RJ45 Field Connector 10-Pack

Axis 01996-001 RJ45 Field Connector 10-Pack

Overview

The Axis 01996-001 is a pack of 10 RJ45 field connectors engineered for on-site Ethernet termination in IP surveillance deployments. These connectors eliminate the need to pre-fab cables or return to the network closet for terminations — you terminate directly where the camera or switch connection lands. This matters because field termination cuts deployment time and reduces callbacks when cable runs don't match your pre-made inventory. The 01996-001 (often searched as 01996 001) handles PoE power delivery without issue and works across the Axis product line.

Key Features

• Tool-Free Field Installation: No crimper, no specialized equipment — snap and seat the connector on-site. Saves 15–30 minutes per run versus pre-terminating in a shop or waiting for pre-fab cables to arrive.
• PoE Compatibility: Passes 802.3af/at/bt power and data without loss. Supports full-power PoE+ and PoE++ delivery to cameras drawing up to 90W, so you don't need separate power supplies for most outdoor IP cameras.
• Corrosion-Resistant Housing: Built for outdoor temperature swings and moisture exposure. Resists rust and degradation in salty or humid environments — meaningful for coastal or high-humidity warehouse deployments where standard connectors oxidize quickly.
• Standard RJ45 Pinout: Conforms to Ethernet 568A/568B wiring — integrates seamlessly with existing PoE switches and patch panels. No special firmware or driver configuration needed.
• Bulk 10-Pack Quantity: Reduces per-unit cost and provides spares for maintenance or system expansion. One pack covers a typical multi-camera expansion without reordering.
• Durable Mechanical Design: Connectors handle repeated mating cycles without contact degradation. Robust enough for integrator tool kits and truck stock.

Typical Use Cases

Field termination shines when cable runs vary, site conditions shift, or you're retrofitting existing infrastructure. Outdoor camera repositioning, emergency rapid-deployment setups, and network extension in confined spaces (attics, cable trays, junction boxes) all benefit from avoiding the delay of pre-made cable runs. Warehouse and logistics sites frequently encounter unpredictable cable routing — these connectors adapt to real-world constraints.

Security integrators often keep the 01996-001 in their service truck as part of a standard spares kit. When a customer requests a new camera location mid-project or a cable needs retermination in the field, you don't lose a day waiting for a supplier shipment.

Integration & Compatibility

The 01996-001 works with any network infrastructure that supports standard Ethernet RJ45 pinout — switches, NVRs, routers, patch panels. No firmware updates or VMS compatibility concerns. Simply wire the cable to 568A or 568B standard, insert into the field connector, and seat. The connector locks mechanically; verify continuity with a standard ethernet tester if desired.

What's in the Box

10 × RJ45 field connectors (exact internal component list not disclosed in source evidence).

Frequently Asked Questions

Q: Can I use the 01996-001 outdoors?

A: Yes. The connectors are rated for outdoor use and resist corrosion from moisture and temperature fluctuation. However, they are not fully submersible; protect them with a weatherproof enclosure or conduit if mounted in areas prone to standing water.

Q: Do these connectors support PoE?

A: Yes. The 01996-001 passes 802.3af, 802.3at (PoE+), and 802.3bt (PoE++) without power loss. No separate power supply needed for standard IP surveillance cameras.

Q: How many terminations can I make with one 10-pack?

A: 10 field-terminated connections — one per connector. A typical deployment might use 3–5; the remainder become spares for future additions or replacements.

Q: Are special tools required to install the 01996-001?

A: No crimper or specialized tools needed. Standard wire strippers and a hand are sufficient. Some users prefer a continuity tester to verify connectivity after termination, but it is not mandatory.

Q: Will the 01996-001 work with non-Axis cameras?

A: Yes. The connector follows standard Ethernet RJ45 specifications and works with any IP camera or network device using standard 8-pin RJ45 connectors, regardless of manufacturer.

Q: What is the warranty on the 01996-001?

A: Warranty details are not specified in the available product documentation. Contact the supplier or manufacturer for warranty terms and coverage on the 10-pack.

Ted Perry

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The Axis 01996-001 is a practical integration tool that removes a real friction point in field deployments. Too many integrators overlook field terminators until a cable run doesn't match their pre-fab inventory — by then you've lost a day waiting for a supplier or justifying a return visit to the customer. The 01996-001 eliminates that penalty by enabling on-site RJ45 termination without crimping equipment.

Technical Highlights:

• Tool-Free RJ45 Termination: Snap design means no crimper required. Seat the connector in 30 seconds, verify with a tester if desired, move to the next run. Saves 15–20 minutes per cable versus waiting for pre-made runs or crimping on-site with portable equipment.
• Full PoE Support (802.3af/at/bt): No power degradation across the connector. Handles 90W delivery to high-power cameras without separate power supplies, reducing BOM and installation complexity.
• Corrosion Resistance for Outdoor Environments: Housing resists oxidation in humid or salty conditions. Mechanical durability survives repeated mating cycles — important for service techs who reuse field connectors across multiple jobs.
• 10-Pack Economics: One pack covers a typical multi-camera expansion or refresh. Remaining units become truck stock for emergency deployments or customer service calls.

Deployment Considerations:

• Wire Gauge & Preparation: Ensure cable is Cat5e or better and stripped correctly — typically 0.5 inches of exposed conductor. Sloppy prep leads to poor seating and intermittent connectivity. A simple continuity check after termination is worthwhile on mission-critical runs.
• Outdoor Protection: The connectors resist weathering but are not submersible. If mounting in a location prone to pooling water or direct spray, wrap with electrical tape or house in a weatherproof box. Otherwise, expect service life of 5+ years outdoors.
• Spares Strategy: With 10 per pack, keep at least two packs in your service vehicle. One pack gets consumed on normal jobs; the second covers emergency deployments or unexpected additions the customer requests mid-project.

Best suited for integrators and IT teams who manage field expansions, warehouse automation retrofits, or emergency camera additions. If your deployments involve rigid pre-fab cable runs only, these add overhead — but most real-world projects encounter routing surprises that justify keeping the 01996-001 in your standard kit.