AsRock ROMED16QM3 EEB Server Motherboard

Overview

The AsRock ROMED16QM3 is an EEB-form-factor server motherboard built around a single SP3 processor socket, sized for rackmount chassis at 15.00 x 14.50 in with a 3.00 in max component height and a 4.05 lb board weight. It is aimed at integrators building recording servers, VMS hosts, and edge-compute nodes where board-level reliability and rack compatibility matter more than desktop convenience. The ROMED16QM3 ships factory-new, sourced through channel-direct sourcing with no grey-market or parallel imports, and its country of origin is listed as China (CN) under UNSPSC code 43201513 for procurement and export classification.

Key Features

• EEB form factor (15.00 x 14.50 in): matches standard rackmount and tower server chassis without a custom tray — check your case's EEB clearance before ordering, since this is a larger footprint than ATX.
• 3.00 in max board height: a relevant number when you're stacking this into a 2U or 3U chassis with limited internal clearance around the socket and DIMM banks — measure your chassis riser height against this before you commit to a low-profile build.
• 4.05 lb board weight: useful for calculating shipped system weight when this board goes into a fully populated rack chassis with drives, PSUs, and cabling — freight and rack-density planning both depend on getting this right.
• Single SP3 socket platform: positions this board for single-socket server-class deployments — a lower-cost, lower-power-draw alternative to dual-socket boards when your workload (recording, transcoding, light virtualization) doesn't need two CPUs' worth of PCIe lanes and cores.
• Factory-new, channel-direct sourcing: no grey-market or parallel-import risk on a board this specialized — meaningful when server motherboards commonly show up refurbished or pulled from decommissioned systems on secondary markets.

Integration & Compatibility

Because the ROMED16QM3 is EEB-sized, plan your chassis selection around full EEB tray support, not just ATX-compatible mounting holes — mismatched standoffs are the most common install error on this class of board. Pair it with a chassis and PSU rated for continuous server-class duty cycles, and confirm your rack has the 15.00 x 14.50 in clearance plus the 3.00 in vertical space this board and its socket cooler require. For teams building out network video recorders or custom VMS hosts, this board is a foundation component — pair it with adequate storage and retention planning before finalizing drive counts and RAID configuration. Review the broader AsRock catalog for compatible chassis and expansion components, and consult a VMS architecture guide if this board is going into a multi-camera recording deployment. A rack mount accessories line is worth checking for rail kits matching your chassis depth.

Frequently Asked Questions

Q: What form factor is the ROMED16QM3?

A: EEB, measuring 15.00 x 14.50 in with a 3.00 in maximum component height — confirm your chassis supports full EEB trays before ordering.

Q: How much does the ROMED16QM3 weigh?

A: 4.05 lb for the bare board, useful for calculating total shipped or racked system weight.

Q: Where is the ROMED16QM3 manufactured?

A: Country of origin is listed as China (CN).

Q: Is the ROMED16QM3 new or refurbished?

A: It is factory-new, sourced through channel-direct sourcing with no grey-market or parallel imports.

Jerry Tildsen

The AsRock ROMED16QM3 lands on my bench when a build needs single-socket SP3 server capability without going to a dual-socket board — the EEB footprint at 15.00 x 14.50 in tells you right away this isn't going in a standard mid-tower.

Technical Highlights:

• EEB 15.00 x 14.50 in footprint: matches server-chassis trays directly, but it's noticeably larger than ATX — verify chassis compatibility before racking.
• 3.00 in max component height: the ceiling you're working with in a lower-profile 2U build; check your socket cooler height against it.
• 4.05 lb board weight: factor this into total system weight calculations for rack density and shipping.

Deployment Considerations:

• Confirm chassis EEB tray support and standoff layout before mounting — this is the most common fitment mistake on boards this size.
• Country of origin is CN; flag this during procurement if your deployment has sourcing-origin restrictions to verify against your specific compliance requirements.

Solid pick for a single-socket SP3 recording server or VMS host build where rack space is available and you don't need dual-CPU headroom — the ROMED16QM3 gets you server-class board reliability without the cost and power draw of a two-socket platform.