AsRock GENOAD8X-2T/BCM Single Socket SP5 EEB Server Motherboard

Overview

The GENOAD8X-2T/BCM is a single-socket SP5 (LGA 6096) server motherboard from AsRock's Rack division, built in the EEB form factor for rackmount and tower server chassis standardized on that footprint. The SP5 socket places this board in AsRock Rack's 4th Gen AMD EPYC ("Genoa"/"Genoa-X") platform family, positioning it for compute-dense workloads such as video management servers, virtualization hosts, and centralized recording infrastructure where single-socket density and I/O headroom matter more than dual-socket scaling. The "2T" designation in the model name points to dual 10GbE networking onboard, and "BCM" indicates a Broadcom-sourced networking or management component — both consistent with AsRock Rack's naming convention across this board family. GENOAD8X-2T/BCM (often searched as GENOAD8X 2T/BCM) ships as a bare motherboard for system integrators building or upgrading server platforms rather than as a complete chassis solution.

Key Features

• Single Socket SP5 (LGA 6096): supports 4th Gen AMD EPYC processors, giving you a single high-core-count CPU option for consolidating workloads onto fewer physical nodes rather than managing a dual-socket platform's added power and thermal overhead.
• EEB Form Factor: a standardized 12in x 13in server footprint compatible with common rackmount and pedestal server chassis — check chassis EEB tray clearance before ordering, especially in 1U/2U short-depth builds.
• Compact Board Footprint (15.30 x 16.40 x 2.70 in shipping dimensions, 4.65 lb): confirms standard EEB packaging weight for planning inbound freight and rack integration labor on multi-unit builds.

Integration & Compatibility

As a bare motherboard, the GENOAD8X-2T/BCM integrates into new-build or refresh server projects where the chassis, power supply, memory, and storage are sourced and validated separately against AsRock Rack's published SP5 platform compatibility lists. Confirm chassis EEB compatibility, PSU connector pinout, and BIOS/BMC firmware revision requirements against AsRock Rack's own documentation for this model before committing to a full build-out — those details are outside what's verifiable here. If you're speccing a broader surveillance or data center compute deployment, pair board selection with your network video recorders and PoE switches planning, and review a VMS architecture guide before finalizing server-side hardware. The board is manufactured in China (country of origin CN) and is sourced factory-new — no grey-market, no parallel imports.

Frequently Asked Questions

Q: What CPU socket does the GENOAD8X-2T/BCM use?

A: It uses a single SP5 (LGA 6096) socket for 4th Gen AMD EPYC processors.

Q: What form factor is the GENOAD8X-2T/BCM?

A: EEB, a standard server board form factor sized for rackmount and pedestal server chassis.

Q: How much does the GENOAD8X-2T/BCM weigh, and what are its shipping dimensions?

A: It weighs 4.65 lb with shipping dimensions of 15.30 x 16.40 x 2.70 in (L x W x H).

Q: Where is the GENOAD8X-2T/BCM manufactured?

A: Its country of origin is China (CN).

Q: Does the GENOAD8X-2T/BCM include onboard networking?

A: The "2T" model designation indicates dual 10GbE networking; confirm exact port count and chipset against AsRock Rack's official documentation before finalizing a build.

Eden Phillips

The GENOAD8X-2T/BCM lands on my desk as a single-socket SP5 EEB board, and the spec that matters most before anything else is the socket itself — LGA 6096 puts you on AsRock Rack's 4th Gen EPYC platform, not the older SP3 generation, so don't try to cross-shop coolers or chassis retention hardware from a prior build.

Technical Highlights:

• Single Socket SP5 (LGA 6096): one high-core-count EPYC CPU instead of two sockets to manage — simpler power delivery and thermal design for integrators standardizing on single-socket density.
• EEB Form Factor: a known quantity for chassis selection — verify your rack unit's EEB tray depth before ordering, since EEB runs larger than ATX/SSI-CEB in both dimensions.
• 4.65 lb / 15.30 x 16.40 x 2.70 in Shipping Profile: useful for freight and multi-unit rack build planning when you're speccing several nodes at once.

Deployment Considerations:

• This ships as a bare motherboard — budget separately for SP5-compatible memory, a chassis with EEB clearance, and a PSU matched to AsRock Rack's connector spec before you build.
• The "2T" and "BCM" suffixes point to dual 10GbE and Broadcom-sourced components respectively, but confirm exact port counts and chipset revision against AsRock Rack's own documentation — that level of detail isn't something I'll guess at from a model number alone.

This is a fit for integrators standardizing a video management or virtualization server refresh around single-socket 4th Gen EPYC density, where GENOAD8X-2T/BCM's EEB footprint and SP5 platform are already the known target — not a board to pick blind without cross-checking chassis compatibility first.