AsRock 2U2E-F/ROME2 2U Rackmount Server Barebone
The 2U2E-F/ROME2 is a 2U rackmount server barebone from AsRock built around dual SP3 (LGA4094) sockets — the platform architects reach for when a single-socket AMD EPYC build won't clear the core count or memory bandwidth a workload demands. At 38.39 x 23.23 x 8.27 inches and roughly 48.17 lb bare, it occupies standard 2U rack space, so capacity planning against existing rack elevations and PDU load is straightforward. This is a barebone chassis platform, not a configured server — you supply the CPUs, memory, drives, and any add-in cards to match the workload, whether that's a video management server, an analytics node, or general compute for a network video recorder deployment sitting alongside a camera estate.
Overview
Dual SP3 (LGA4094) sockets put the 2U2E-F/ROME2 in AMD EPYC 7002/7003-class territory, which is the segment where integrators land when a project calls for high core density in a shared rack footprint rather than scaling out across more 1U nodes. The 2U form factor is the deciding factor for a lot of buyers: it's dense enough to keep rack unit costs down in a colo or server room, but still leaves enough chassis volume for the airflow and drive bay layout dual-socket EPYC boards typically need. Country of origin is Taiwan, which matters for procurement teams tracking supply chain documentation on federal or regulated bids.
Key Features
- Dual Socket SP3 (LGA4094): supports two AMD EPYC processors on a single board, so you can consolidate workloads that would otherwise need two separate single-socket chassis — fewer rack units, fewer network drops, less cabling to manage.
- 2U Rack Form Factor: fits standard 19-inch rack rail systems at 2 rack units of height, a middle ground between 1U density and 4U expansion headroom — appropriate when you need dual-socket compute but can't spare 4U of rack space per node.
- 38.39 x 23.23 x 8.27 in chassis: the 23.23-inch width and depth profile is worth checking against your rack's usable depth before ordering — some 2U dual-socket boards run deep enough to crowd cable management arms at the rear of the cabinet.
- 48.17 lb bare chassis weight: factor this into rail-kit weight ratings once CPUs, RAM, drives, and PSUs are installed — a populated dual-socket 2U build can climb well past the bare weight, which matters for rack stability and shipping planning.
- Taiwan country of origin: relevant for government and regulated-industry procurement teams that track manufacturing origin as part of vendor due diligence.
Integration & Compatibility
As a barebone, the 2U2E-F/ROME2 (often searched as 2U2E F/ROME2) is a starting chassis-and-board platform rather than a turnkey server — plan your own CPU, memory, and storage bill of materials against AsRock's published compatibility lists before ordering components. For teams building out video surveillance backend infrastructure, this class of dual-socket 2U platform is a common fit for VMS servers, deep-learning analytics appliances, or storage-heavy recording nodes where a single high-core-count chassis needs to do the work of several smaller boxes. Pair it with rack power distribution and supply planning appropriate to a dual-CPU thermal and power envelope, and confirm PDU and UPS capacity before populating both sockets.
Frequently Asked Questions
Q: Does the 2U2E-F/ROME2 come with CPUs and memory installed?
A: No — this is a barebone chassis and board platform. You supply the SP3 (LGA4094) processors, memory, and storage to match your workload.
Q: How many rack units does the 2U2E-F/ROME2 require?
A: It is a 2U rackmount design, fitting standard 19-inch rack elevations at 2 rack units of height.
Q: What processors are supported?
A: The board has dual SP3 (LGA4094) sockets, supporting compatible dual-socket AMD EPYC processors per AsRock's qualified CPU list.
Q: How much does the 2U2E-F/ROME2 weigh?
A: The bare chassis weighs approximately 48.17 lb; populated weight will be higher once CPUs, memory, storage, and power supplies are installed.
Q: Where is the 2U2E-F/ROME2 manufactured?
A: Country of origin is Taiwan.
The 2U2E-F/ROME2 is the kind of chassis I get calls about when a customer's single-socket EPYC box has run out of headroom. Dual SP3 (LGA4094) sockets in a 2U footprint is a real space-saving proposition — you're not burning 4U or two separate chassis to get there.
Technical Highlights:
- Dual Socket SP3 (LGA4094): lets you run two EPYC processors on one board, consolidating what would otherwise be two single-socket nodes into one 2U chassis — fewer switch ports and PDU drops consumed per unit of compute.
- 2U Form Factor at 38.39 x 23.23 x 8.27 in: confirm usable rack depth before ordering — a 23.23-inch chassis footprint plus cable slack can crowd a rear cable arm in a tighter cabinet.
- 48.17 lb bare weight: that's before CPUs, RAM, drives, and redundant PSUs go in — budget rail and rack weight capacity accordingly, especially if you're stacking several of these in one cabinet.
Deployment Considerations:
- This ships as a barebone — you're sourcing SP3 CPUs, memory, and drives separately, so get your bill of materials qualified against AsRock's supported component list before you order.
- Dual-socket EPYC platforms draw more power and generate more heat per rack unit than single-socket boxes of the same height — verify your rack's cooling and PDU capacity can handle two populated sockets before committing rack space.
I'd point the 2U2E-F/ROME2 at a consolidated VMS or analytics backend build — a shop replacing three or four single-socket recording servers with one dense dual-EPYC 2U node, where rack space and switch port count are the real constraints.
