AsRock 1U2N2G-AM5/2T 1U Dual-Node AM5 Rack Server Barebone

Overview

The AsRock 1U2N2G-AM5/2T is a 1U rack barebone built around two independent single-socket AM5 (LGA 1718) server nodes sharing one chassis — a density play for buyers who need two separate compute domains (edge VMS recording nodes, dual-tenant hosting, parallel analytics workloads) without burning two rack slots. Each node runs its own AM5 processor, so you get two fully independent servers — separate boot, separate OS, separate workload — in the physical footprint of a single 1U chassis. For teams speccing out compact server rooms or edge closets next to camera aggregation points, that 2-for-1 density is the entire value proposition of the 1U2N2G-AM5/2T (often searched as 1U2N2G AM5/2T).

Key Features

• Dual independent AM5 (LGA 1718) nodes: two full server nodes in one 1U chassis means you can run two isolated workloads — for example, a primary NVR node and a failover or analytics node — without doubling rack space or PDU drops.
• 1U rack form factor: standard 1U height keeps this compatible with existing 19-inch rack layouts, so it drops into the same rack as your switches and NVRs without special rail kits or spacing changes.
• Dual 10GbE networking (2T): the /2T designation in the model number points to onboard 10-gigabit Ethernet, giving each node the network headroom for multi-stream video ingest, iSCSI storage traffic, or high-throughput backup jobs without needing an add-in NIC.
• Single-socket-per-node design: each node takes one AM5 processor rather than sharing a socket, so per-node performance isn't compromised by resource contention between the two nodes — they behave as genuinely separate machines.
• 46.72 lb chassis weight: factor this into rail and rack load planning, especially in shared racks with other 1U/2U gear stacked above and below.
• Taiwan (TW) country of origin: manufactured in Taiwan, relevant for buyers tracking country-of-origin documentation on server hardware procurement.

Integration & Compatibility

Because each node in the 1U2N2G-AM5/2T is electrically and logically independent, integrators can assign different roles to each side of the chassis — one node handling live recording ingest from an IP camera deployment, the other running analytics or acting as a hot spare. Pair it with a managed PoE switch upstream to feed camera traffic into the 10GbE interfaces, and size your network video recorder or storage plan around the dual-node throughput using a storage and retention planning guide before committing to drive count and RAID layout. Rack planning should account for the AM5 (LGA 1718) socket generation when selecting processors, and confirm memory and drive compatibility against AsRock's published node-level configuration before finalizing a build sheet. Teams standardizing on a single vendor for compute can browse the broader AsRock server lineup for compatible single-node alternatives if dual-node density isn't required for every rack position.

What's in the Box

Package contents were not confirmed in available manufacturer documentation for this listing.

Frequently Asked Questions

Q: What does the "2N" in 1U2N2G-AM5/2T mean?

A: It denotes two independent server nodes housed in the single 1U chassis, each with its own AM5 (LGA 1718) socket.

Q: What networking does the 1U2N2G-AM5/2T include?

A: The /2T in the model name indicates onboard 10GbE networking per node.

Q: How much does the 1U2N2G-AM5/2T weigh?

A: The barebone chassis weighs 46.72 lb — factor this into rack and rail load calculations.

Q: Where is the 1U2N2G-AM5/2T manufactured?

A: Country of origin is Taiwan (TW).

Q: Can the two nodes in the 1U2N2G-AM5/2T run different operating systems?

A: Yes — each node is a fully independent server with its own AM5 socket, so each can be configured and booted separately.

Eden Phillips

What gets my attention on the 1U2N2G-AM5/2T is the dual-node layout in a single 1U chassis — two independent AM5 (LGA 1718) sockets instead of one, which changes how you plan rack real estate for split workloads.

Technical Highlights:

• Dual AM5 (LGA 1718) nodes: two isolated single-socket servers in one 1U chassis — plan for two full node builds (CPU, memory, storage) rather than one.
• Onboard 10GbE (2T): each node gets 10-gigabit networking, which matters when you're pulling multiple video streams or running storage traffic over the same link.
• 46.72 lb chassis: heavier than a typical single-node 1U — confirm rail rating and rack load budget before mounting, especially near the top of a populated rack.

Deployment Considerations:

• Because the two nodes are fully independent, you can assign one to a production role and the other to failover or testing without any shared-resource contention between them.
• The 1U2N2G-AM5/2T ships as a barebone — confirm CPU, memory, and drive compatibility for the AM5 platform before finalizing a bill of materials, since none of that is bundled in.

Best fit is a rack position where you need two genuinely separate AM5 servers — say, a primary recording node paired with a dedicated analytics or failover node — but only have budget for a single 1U of space.