APC by Schneider Electric SYAFSU11R Symmetra LX 24U Right Side Panel
Overview
The SYAFSU11R is the OEM right side panel for the APC Symmetra LX 24U system — a precision-fit enclosure component sourced from Schneider Electric SA and manufactured to the same tolerances as the original chassis. At 42" tall, 28" wide, and 2" deep, it covers the full height of a 24U Symmetra LX frame and maintains the structural integrity and airflow management the system was engineered for. If you're rebuilding a damaged Symmetra LX chassis, expanding an existing installation, or simply replacing a panel lost in a data center move, this is the correct OEM part.
At 18.03 lb, the SYAFSU11R is a solid steel panel — not a lightweight substitute. Expect to handle it with two people during installation. The black finish matches the Symmetra LX enclosure family standard, so there's no visual mismatch in mixed-cabinet rows.
Key Features
- Exact 24U system fit: Dimensioned at 42" H × 28" W × 2" D specifically for the APC Symmetra LX 24U frame — not a universal panel. This matters for airflow containment: a mismatched panel leaves gaps that short-circuit hot-aisle/cold-aisle containment and raises cooling costs on critical loads.
- OEM provenance: Manufactured by Schneider Electric SA, the same entity that builds the Symmetra LX UPS line. Replacement panels from grey-market sources frequently differ in gauge and finish — this is a factory-new genuine part.
- 18.03 lb steel construction: The weight reflects full-gauge steel rather than a stamped lightweight substitute. For data center audits and physical security compliance, panel gauge matters — thin panels can be displaced by minor impacts and compromise equipment protection.
- Black finish, standard Symmetra LX color family: Matches the enclosure color specification. If you're running a visually managed data center floor with standardized cabinet colors, this matters more than it sounds.
- 2-year manufacturer warranty (repair or replace): Schneider Electric covers this component for 2 years under a repair-or-replace terms — consistent with the broader Symmetra LX accessory warranty tier.
- Country of origin — Philippines: Manufactured at Schneider Electric's Philippines production facilities, consistent with APC's established supply chain for Symmetra LX enclosure components.
Integration & Compatibility
The SYAFSU11R is explicitly compatible with the APC Symmetra LX 24U system. It is not listed as compatible with the Symmetra LX 8U, 16U, or other frame heights — if you're working with a different rack unit count in the Symmetra LX family, verify the correct panel SKU before ordering. The 24U designation refers to the frame height, not usable UPS module slots. If you're unsure which Symmetra LX frame variant you have on the floor, cross-reference your UPS chassis model number against APC's Symmetra LX accessory compatibility matrix before ordering this panel.
For broader APC by Schneider Electric UPS systems and accessories, including Symmetra LX replacement parts, frame components, and battery modules, the full APC line is available. If you're speccing out a complete power protection infrastructure for a critical facility, pairing replacement structural components with verified battery and power module inventory from the same source simplifies procurement and warranty tracking.
Frequently Asked Questions
Q: Is the SYAFSU11R compatible with the Symmetra LX 8U or 16U frames?
A: No. The SYAFSU11R is specified for the APC Symmetra LX 24U system only. It measures 42" H × 28" W × 2" D — dimensioned to the 24U frame. Verify your chassis model before ordering if you have a different frame height.
Q: What is the warranty on the SYAFSU11R?
A: Schneider Electric covers the SYAFSU11R under a 2-year limited warranty with repair-or-replace terms.
Q: How heavy is the SYAFSU11R? Do I need two people to install it?
A: The panel weighs 18.03 lb. Given its 42" height and steel construction, two-person installation is strongly recommended to avoid dropping or misaligning the panel during mounting.
Q: Is this a genuine APC/Schneider Electric part or an aftermarket panel?
A: This is a factory-new genuine part manufactured by Schneider Electric SA — the same manufacturer as the Symmetra LX UPS system itself. It is not an aftermarket or third-party substitute.
Q: Where is the SYAFSU11R manufactured?
A: The SYAFSU11R is manufactured in the Philippines, consistent with Schneider Electric's established production facilities for Symmetra LX enclosure components.
The SYAFSU11R is a structural component, and that's exactly how you should evaluate it — not as a commodity panel but as a load-bearing piece of the Symmetra LX 24U enclosure. At 18.03 lb and 42 inches tall, this is full-gauge steel built to the same spec as the original chassis. When a panel on a critical UPS gets damaged or lost, the instinct is to source the cheapest replacement that physically fits — that's where things go wrong on the data center floor.
Technical Highlights:
- 42" × 28" × 2" footprint: These are not nominal dimensions — they are the exact fit parameters for the Symmetra LX 24U frame. A panel that's even marginally off on width will leave airflow gaps that undermine your cooling containment design.
- 18.03 lb steel build: Full-gauge construction means this panel contributes to the structural rigidity of the enclosure, not just cosmetic coverage. Thin aftermarket panels flex under racking pressure and can compromise the chassis over time.
- 2-year repair-or-replace warranty: Schneider Electric backs this component with the same warranty tier as other Symmetra LX accessories — repair or replacement for 2 years, which is relevant when this part lives inside a critical power infrastructure deployment.
Deployment Considerations:
- Verify your Symmetra LX frame is specifically the 24U variant before ordering. The panel's 42" height is matched to that frame — it will not fit 8U or 16U Symmetra LX configurations, and the SKU documentation does not list cross-compatibility.
- At 18.03 lb and 42" in height, solo installation is awkward and risks panel misalignment on the mounting rails. Plan for a two-person install, especially in tight data center aisles where maneuvering room is limited.
This panel is the right call for facilities managers and data center ops teams rebuilding or maintaining Symmetra LX 24U infrastructure in production environments where OEM fit and warranty continuity are non-negotiable requirements.
