APC by Schneider Electric AP6002A Vertical 0U Rack Power Distribution Unit
Overview
The AP6002A is a vertical 0U power distribution unit from APC by Schneider Electric, designed to mount in the vertical channel of a standard equipment rack without consuming any rack unit space. Rated at 208V AC (50/60 Hz), it delivers power across 16 IEC 60320 outlets — the right fit for high-density racks where every horizontal U counts and you need a clean, managed power strip running the full height of the enclosure. At 32.8 inches tall and just 2.2 inches wide, the AP6002A fits the standard 0U vertical bay found in two-post and four-post open-frame racks as well as enclosed cabinets. The 10-foot input cord gives you reach back to a dedicated 208V circuit or UPS output without extension hardware. This is a basic metered or switched PDU alternative for deployments where outlet density and form factor matter more than per-outlet switching — budget surveillance equipment racks, AV distribution closets, and secondary server rack power runs are common fits.
Compatibility
The AP6002A is compatible with standard 19-inch two-post and four-post open-frame racks and enclosed cabinets that include a vertical 0U mounting channel. Input is a standard 208V AC plug; verify your facility circuit and UPS output match 200–208V before deploying. The 16 IEC 60320 outlets accept C13 or C19 device cords depending on the specific outlet configuration — confirm outlet type against your server, NVR, switch, or camera power supply cord ends before ordering. Works alongside APC Smart-UPS and Symmetra series UPS outputs rated for 208V distribution. Not suitable for 120V North American standard circuits without a step-up transformer.
Installation Notes
Mount vertically in the 0U side channel of the rack using the integrated bracket hardware. The 32.8 H × 2.2 W × 1.9 D inch profile occupies zero horizontal rack units. Route the 10-foot input cord to your 208V feed before securing outlets to devices — cord management is easier before populating all 16 outlets. Confirm rack channel depth accommodates the 1.9-inch unit depth to avoid clearance conflicts with vertical cable managers.
