HPE JW022A AP-ANT-MNT-5 Outdoor Pole Antenna Mount

Overview

The JW022A is HPE Aruba's AP-ANT-MNT-5 pole antenna mount — a commercial-grade bracket designed to secure external antennas on round poles in outdoor wireless deployments. If you're running Aruba access points with pole-mounted external antennas in a stadium, campus perimeter, parking structure, or industrial yard, this is the hardware that anchors the antenna to the pole and keeps it there through weather. It is a mechanical mounting component, not an access point.

The mount clamps to poles ranging from 1.5 in to 2.5 in (38–63 mm) in diameter, covering standard lighting poles, conduit masts, and similar field structures. Its 150 × 200 × 5 mm steel plate provides a stable, rigid base with a 20 kg rated load capacity on a 2-inch pole — enough headroom for any standard Aruba external antenna assembly. Wind resistance is rated to 160 km/h, making it suitable for exposed rooftop and outdoor perimeter installations where lesser hardware works loose over time.

Key Features

• Pole diameter range 1.5–2.5 in (38–63 mm): covers the most common outdoor mast and conduit sizes without requiring adapter collars — one bracket fits lighting poles, fence posts, and standard conduit masts across a typical campus or industrial site.
• 20 kg max load capacity: rated on a 2-inch pole, which provides substantial margin above typical Aruba external antenna weights — relevant when you're stacking a dual-band antenna pair on a single mount point.
• 160 km/h wind resistance: engineered for exposed environments; rooftop edges, stadium light poles, and open parking structures won't cause this mount to shift or loosen over a season of weather cycling.
• Operating range −40°C to 70°C: covers cold-climate installations (northern campuses, outdoor arenas in winter) and high-heat environments (rooftops in direct sun, industrial yards in summer) without material degradation.
• RoHS compliant: meets EU Restriction of Hazardous Substances requirements — relevant for international deployments and enterprise procurement policies that require environmental compliance documentation.
• 150 × 200 × 5 mm mount plate: the plate geometry gives enough surface area for stable antenna positioning while keeping the overall assembly compact on the pole.

Integration & Compatibility

The JW022A is designed for use with HPE Aruba external antenna accessories across the Aruba wireless portfolio. Before ordering, verify your antenna's mounting foot pattern against the AP-ANT-MNT-5 plate dimensions (150 × 200 mm). This bracket is a pole-mount solution only — for wall or flat-surface installations, Aruba offers separate mounting hardware in the same antenna accessory line. Pair it with the appropriate outdoor wireless access points and antennas for a complete outdoor deployment stack.

If you are planning a multi-AP outdoor coverage project, review the outdoor wireless planning guide for pole placement, antenna tilt, and co-channel separation recommendations before finalizing mount positions. The physical mounting decision — pole vs. wall vs. pendant — affects RF pattern and coverage footprint, not just mechanical convenience. Also consider compatible PoE switches if runs from the AP back to the IDF are long — outdoor-rated cabling and appropriate PoE budget planning are as critical as the mount hardware itself.

Frequently Asked Questions

Q: What pole sizes does the JW022A accommodate?

A: The AP-ANT-MNT-5 clamps to poles with an outer diameter between 1.5 in and 2.5 in (38–63 mm). This covers most standard outdoor lighting poles, conduit masts, and similar round structures. Poles outside this range require a different mounting solution.

Q: What is the maximum load the JW022A can support?

A: The mount is rated to 20 kg on a 2-inch pole — well above the weight of any standard Aruba external antenna assembly. If stacking multiple antenna elements or adding a radome enclosure, verify the combined assembly weight stays within this limit.

Q: Is the JW022A rated for outdoor use in harsh weather?

A: Yes. The mount is rated for wind resistance up to 160 km/h and operates across a temperature range of −40°C to 70°C, making it suitable for exposed rooftop, stadium, and industrial outdoor environments.

Q: What is the warranty on the JW022A?

A: The JW022A carries a 2-year limited manufacturer warranty per HPE Aruba's standard accessory warranty terms.

Q: Is the JW022A RoHS compliant?

A: Yes, the AP-ANT-MNT-5 is RoHS compliant, meeting EU Restriction of Hazardous Substances requirements for enterprise and international procurement.

James Everett

The JW022A is a straightforward piece of hardware, but I've seen outdoor Wi-Fi projects lose weeks because the wrong mount hardware was ordered. The AP-ANT-MNT-5 fits poles from 38 to 63 mm outer diameter — before you order, measure the actual pole at the planned installation point, not the nominal spec from a lighting fixture datasheet, because as-built pole diameters often differ from spec by several millimeters.

Technical Highlights:

• 160 km/h wind rating: outdoor antenna mounts that aren't rated for wind load are a liability on any exposed structure — a loose antenna shifts RF pattern unpredictably and is a maintenance call waiting to happen. This mount's wind rating makes it a viable choice for rooftop and stadium light-pole placements.
• 20 kg load capacity at 2-inch pole: this headroom matters when you're mounting a dual-band panel antenna with a radome housing — combined assemblies can approach 3–5 kg, and you want margin, not a mount operating at its limit.
• −40°C to 70°C operating range: the low end covers northern-climate deployments where other accessory hardware can become brittle in winter; the high end covers direct-sun rooftop installations where black metal surfaces reach well above ambient air temperature.

Deployment Considerations:

• Confirm antenna foot pattern compatibility with the 150 × 200 mm plate before installing — not all Aruba external antennas share the same bolt pattern, and mismatches require adapter plates that may not be stocked locally.
• The JW022A is a pole-mount only — wall and flat-surface antenna runs require separate Aruba mounting hardware. Don't assume this bracket is universal across the Aruba antenna accessory line.

This mount is the right call for stadium perimeter and outdoor campus AP deployments where antennas go on existing lighting or conduit poles — it's built for that environment and rated accordingly. For indoor or wall-surface antenna placements, select the appropriate Aruba wall-mount bracket instead.