AMD 100-000001754-00 Epyc Embedded 9534 Processor

Overview

The AMD 100-000001754-00 is an Epyc Embedded 9000 Series processor designed for high-performance surveillance, edge computing, and embedded data-center applications where multi-core processing and low power density matter. This processor is a compute building block—not a standalone camera or appliance—intended for systems integrators and OEM manufacturers assembling surveillance NVRs, video management appliances, and real-time analytics platforms that demand sustained, reliable CPU throughput.

At 0.50 lb and compact footprint (1.00 x 1.00 x 0.25 inches), the 100-000001754-00 is engineered for embedded and dense rack deployments where form factor and thermal efficiency directly impact system design. This is a factory-new processor sourced direct from the manufacturer, guaranteeing genuine silicon and no parallel-import risk.

Key Features

• Epyc Embedded 9000 Series Architecture: multi-core design optimized for sustained, parallel workloads—the core strength when transcoding H.265 streams from dozens of cameras simultaneously or running distributed analytics without codec bottleneck.
• Compact Physical Profile (1.0 x 1.0 x 0.25 in, 0.50 lb): enables dense PCB integration and passive thermal designs in fanless or low-noise surveillance appliances where acoustic footprint matters in office or retail environments.
• Embedded-Grade Reliability: manufactured in Malaysia (verified country of origin) to industrial-grade standards. This means consistent yields, documented traceability, and supply-chain predictability—critical for OEMs building surveillance systems with multi-year warranty obligations.
• Low-Power Density Fit: Embedded 9000 series targets subsystem designs where per-core efficiency reduces cooling and PSU overhead. In an 8-channel or 16-channel NVR, efficient CPU power translates directly to smaller power supplies and reduced operating cost over 24/7 duty cycles.
• UNSPSC Classified (43201503): formal procurement classification ensures compatibility with enterprise purchasing workflows, contract vehicles, and supply-chain audits common in Fortune 500 and government surveillance deployments.
• Genuine, Factory-New Silicon: no gray-market, no refurbished dies. Direct manufacturer sourcing guarantees thermal and electrical characteristics match published specifications—essential when designing custom surveillance platforms with tight power or thermal budgets.

Integration & Compatibility

The 100-000001754-00 is a processor die intended for OEM and system-integrator assembly into surveillance NVRs, edge analytics servers, and video appliances. It is not a plug-and-play camera or recorder; it is a compute component that requires motherboard integration, memory (DDR5), storage interface (NVMe, SATA), and management firmware. Integrators typically pair this processor with supported chipset designs, BIOS/UEFI firmware, and OS kernels (Linux for surveillance appliances; Windows Server for managed environments) to enable specific VMS platforms (Milestone XProtect, Axis Camera Station, Genetec, Shinobi, or proprietary surveillance stacks). Confirm motherboard and chipset support with your OEM or system-integration partner before procurement.

No physical cooling, power delivery, or mechanical mounting is bundled with this processor—thermal solution, socket compatibility, and system-level design are integrator-defined. The compact 1.0 x 1.0 x 0.25-inch profile is designed to fit standard processor socket packaging; confirm socket type and pinout with your motherboard vendor to ensure mechanical fit.

Frequently Asked Questions

Q: What socket does the 100-000001754-00 use?

A: The Epyc Embedded 9000 Series uses a specific socket designed for Epyc processors. Confirm socket compatibility with your motherboard or chipset documentation before purchase.

Q: Is the 100-000001754-00 suitable for a surveillance NVR?

A: Yes. The multi-core Epyc Embedded design is widely used in surveillance appliances for real-time video transcoding and analytics. Confirm your motherboard, BIOS, and VMS software support this processor generation.

Q: What cooling solution does this processor require?

A: Cooling is integrator-defined. The compact form factor supports passive heatsinks and active cooling solutions; thermal design power (TDP) and cooling requirements vary by workload and OEM design. Consult the Epyc Embedded datasheet for TDP specifications and cooling guidance.

Q: Can I use the 100-000001754-00 in a fanless surveillance appliance?

A: Possible, but depends on TDP, ambient temperature, and application workload. The compact 1.0 x 1.0-inch form factor supports passive thermal designs; confirm with thermal modeling and your system integrator whether fanless operation meets your duty cycle.

Q: Is the 100-000001754-00 covered by warranty?

A: Warranty terms depend on the seller and regional distributor. Contact your supplier for specific coverage, RMA procedures, and support terms.

Q: What is the country of origin for the 100-000001754-00?

A: Manufactured in Malaysia. Verify procurement compliance (TAA, NDAA, or other government sourcing rules) with your procurement or compliance team if required for your deployment.

Karl Wilson

The 100-000001754-00 is a processor—not a finished appliance—and that matters deeply when you're designing an NVR or edge analytics box. The Epyc Embedded 9000 Series has proven itself in surveillance deployments handling 16+ camera streams with simultaneous H.265 transcoding and real-time object detection. For OEM and system integrators, the 0.50 lb, compact 1.0 x 1.0 x 0.25-inch form factor is a real advantage: you can design passive-cooled surveillance appliances without the acoustic penalty of spinning fans.

Technical Highlights:

• Multi-core Epyc Architecture: built for parallel workloads—transcoding H.265 from a dozen cameras at once without bottleneck. This is why surveillance OEMs chose this processor tier over lower-core-count alternatives.
• Compact Embedded Form Factor (1.0 x 1.0 x 0.25 in): enables fanless or low-noise appliance designs. In a quiet office or retail environment, acoustic footprint is a silent sales advantage over noisy rack appliances.
• Malaysia-Origin Traceability (UNSPSC 43201503): verified country of origin and formal procurement classification simplify compliance audits, government contracts, and enterprise supply-chain validation—common requirements in Fortune 500 surveillance deployments.

Deployment Considerations:

• This is a bare processor, not a standalone device. You must integrate it into a motherboard, memory subsystem, storage controller, and OS—do not order this expecting a working appliance out of the box.
• Socket type, thermal design power (TDP), and cooling solution are all integrator-defined. Confirm motherboard compatibility, BIOS support, and VMS software qualification before finalizing your design.

Best fit: OEM and system-integrator builds of 16-channel and up NVRs, edge analytics servers, and video appliances where sustained multi-core throughput and low acoustic footprint drive system value. Not suitable for retail point-and-shoot surveillance cameras or small-office all-in-one boxes.