Middle Atlantic ALDS4000C Aluminum Designer Series Raceway Cover

Overview

The Middle Atlantic ALDS4000C is an aluminum raceway cover from the Designer Series line, engineered for clean cable concealment in commercial AV, security, and structured wiring installations. At 6 inches wide, 3 inches tall, and 2.25 inches deep, it provides a generous interior channel — enough cross-section to bundle and route multiple cable runs behind a single finished surface without stacking separate covers. If you're finishing out a conference room, operations center, or retail security deployment where exposed conduit isn't acceptable, this is the type of component that separates a professional install from an ad hoc one. Browse the full Middle Atlantic catalog for compatible raceway systems, rack infrastructure, and cable management solutions.

Key Features

• Aluminum Construction: Metal raceway covers hold their profile over time and resist the warping or yellowing that plastic alternatives can develop under heat loads from bundled power cables. For installations that need to look sharp years after commissioning, aluminum is the right call.
• 6 in W × 3 in H × 2.25 in D Channel Dimensions: The 6-inch width and 3-inch height give you a substantial cable pathway — useful when routing multiple low-voltage runs (camera cable, access control wiring, audio) in a single managed channel rather than running separate smaller raceways for each system. The 2.25-inch depth keeps the profile relatively flat against the wall.
• TAA Compliant: The ALDS4000C meets Trade Agreements Act requirements, making it eligible for federal government projects, GSA schedule procurement, and any bid specification that mandates TAA-compliant components. If you're working on a government facility or federally funded project, this matters at the component level — not just for the cameras and panels.

Integration & Compatibility

The ALDS4000C is part of Middle Atlantic's cable management and raceway infrastructure line. Verify fitting compatibility with the specific ALDS4000 series base channel before ordering — raceway covers in this family are designed to mate with corresponding base pieces. For AV and security integrators specifying rack and enclosure systems, Middle Atlantic's raceway components are designed to coordinate with their broader rack infrastructure. Consult the AV installation planning resources when laying out cable pathways for multi-system deployments.

Frequently Asked Questions

Q: Is the ALDS4000C TAA compliant?

A: Yes. The ALDS4000C is TAA (Trade Agreements Act) compliant, making it suitable for federal government and GSA-schedule procurement.

Q: What are the dimensions of the ALDS4000C?

A: The ALDS4000C measures 6 inches wide, 3 inches tall, and 2.25 inches deep (15.2 cm × 7.6 cm × 5.7 cm).

Q: What material is the ALDS4000C made from?

A: The ALDS4000C is constructed from aluminum, providing a durable, professional finish suited to commercial installations.

Q: Does the ALDS4000C work with other Middle Atlantic ALDS4000 series components?

A: The ALDS4000C is part of the Middle Atlantic ALDS4000 Designer Series raceway family. Verify base channel compatibility with your specific series configuration before ordering.

Marty Allison

The ALDS4000C sits in a part of the install that most specs don't call out by name but every client notices: the wall finish. The 6-inch-wide aluminum channel gives you real routing capacity — enough to consolidate camera cable, access control runs, and low-voltage data in one clean surface-mounted pathway rather than three separate plastic raceways stacked beside each other. TAA compliance on a cover piece like this is also worth flagging; on government and education jobs, the compliance requirement runs all the way down to infrastructure components, not just the cameras and panels.

Technical Highlights:

• 6 in × 3 in × 2.25 in Channel: The interior cross-section handles multi-cable bundling — useful when consolidating camera, access control, and audio runs in a single managed pathway on a finished wall.
• Aluminum Body: Holds dimensional stability under heat from bundled power cables; won't warp or discolor the way PVC alternatives can over a multi-year install life.
• TAA Compliant: Clears the compliance gate on federally funded projects and GSA bids where every BOM line item — including infrastructure covers — must be verified TAA-compliant.

Deployment Considerations:

• Confirm base channel compatibility within the ALDS4000 series before ordering the ALDS4000C cover — the cover is designed to mate with a corresponding base piece, and mixing series components without verification risks fit issues on install day.
• At 2.25 inches of depth, the profile sits relatively flat, but measure your wall-offset clearance before committing if you're routing behind furniture or in tight corridor installations.

The ALDS4000C is the right specification for government facilities, higher-education security deployments, or any commercial install where the finished cable pathway needs to meet TAA requirements and look intentional — not improvised.