Altronix MM24 Mounting Magnets 24-Pack
The Altronix MM24 is a 24-pack of mounting magnets designed to secure cameras, sensors, and access control components without permanent installation. These magnets enable rapid repositioning and redeployment across ferrous metal surfaces—critical when test-fitting equipment before committing to drilling or when you need to move gear between sites without surface damage.
Key Features
- 24 magnets per pack: Enough for multiple deployment points across a single site or to stock several integration vehicles. Reduces repeat purchasing for multi-location jobs.
- Ferrous metal surface compatibility: Works on steel beams, metal roof structures, conduit, and building frames—the standard infrastructure you'll find in warehouses, industrial facilities, and retrofit installations. Won't adhere to aluminum or stainless steel.
- Quick-release mounting: Reposition or remove equipment in seconds without tools. Useful for adjusting camera angles mid-deployment or moving a sensor to validate coverage before finalizing placement.
- Reusable installation method: No adhesive, brackets, or fasteners to replace. Magnets remain viable across multiple installs, lowering consumables cost over time and reducing site damage claims.
- Non-invasive mounting: Eliminates drilling, concrete anchors, or wall penetrations. Critical in leased facilities, historic buildings, or where tenant agreements restrict modifications. Speeds install timelines when landlord approval is required.
- Lifetime Limited Warranty: Covers defects in materials and workmanship for the life of the product—standard Altronix warranty backing. Reduces replacement cost if a magnet fails in the field.
Compatibility and Integration
The MM24 works with any camera, sensor, or access control enclosure light enough to be safely held by magnetic force and small enough to mount on ferrous surfaces. Typical applications include camera mounts and brackets that integrate magnetic receivers, compact dome and bullet IP cameras, motion detectors, door sensors, and lightweight intercom stations. Always verify the combined weight of your device and any mounting bracket does not exceed the magnet's holding capacity—contact the magnet manufacturer or your system integrator if load specifications are unclear. These magnets are not suitable for outdoor corrosive environments without protective coating; consider alternative mounting solutions in coastal salt-air or chemical-wash facilities.
Typical Deployment Scenarios
- Temporary security assessments: Deploy cameras quickly across a site to evaluate coverage before permanent installation. Reposition based on live footage feedback without waiting for installation crews.
- Warehouse and logistics automation: Mount sensors on metal racking and conveyor frames to track inventory movement or gate access. Adjust sensor aim as warehouse layout changes without surface damage.
- Retrofit and legacy upgrades: Install new IP-based equipment on existing metal structures in older buildings where drilling may compromise structural integrity or void leases.
- Testing and commissioning: Use magnets to hold equipment in test positions during NVR setup and camera calibration, then transition to permanent mounts once verification is complete.
Installation Considerations
Verify that mounting surfaces are ferrous (iron or steel-based) and free of paint, rust, or heavy buildup that would reduce magnetic adhesion. Wipe surfaces clean with a dry cloth before installation. Do not rely on the MM24 as the sole mounting method for high-traffic areas where accidental contact might dislodge equipment—pair magnets with adjustable ball-mounts or secondary restraints in active zones. In vibration-prone environments (near HVAC units, conveyor systems, or rail), add a safety cable to prevent dropping if vibration shifts a magnet's grip.
What's in the Box
Frequently Asked Questions
Q: Will the MM24 magnets work on aluminum or stainless steel surfaces?
A: No. The Altronix MM24 magnets are designed for ferrous (iron and steel-based) surfaces only. Aluminum and stainless steel are non-ferrous and will not hold a magnetic charge. Verify your installation surface is standard steel or iron before deploying.
Q: How much weight can each magnet hold?
A: The exact holding capacity per magnet is not specified in the product documentation. Contact your integrator or the magnet manufacturer for load ratings before mounting cameras or heavy sensors. Always assume conservative margins in vertical or high-vibration installations.
Q: Can I use the MM24 for outdoor installations?
A: The MM24 is not weather-sealed or corrosion-resistant. In outdoor environments, salt air, moisture, and UV exposure will degrade the magnet over time. Outdoor use is not recommended without protective coating or an alternative mounting method rated for exterior exposure.
Q: Are the magnets in the MM24 replaceable if one fails?
A: The MM24 pack consists of individual magnets, so a single failed magnet does not require replacement of the entire pack. The Lifetime Limited Warranty covers defects; contact the manufacturer or your specialty retailer for warranty replacement of individual units.
Q: Will magnets interfere with camera electronics or sensors?
A: Modern IP cameras and sensors are typically shielded against magnetic interference. However, if you are mounting magnets directly against unshielded circuitry or near compass-based sensors, test the installation first in a controlled environment to confirm no performance impact.
Q: What is the warranty coverage on the MM24?
A: The Altronix MM24 is backed by a Lifetime Limited Warranty covering defects in materials and workmanship. This does not cover damage from misuse, corrosion, or normal wear from repeated installation and removal.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Altronix MM24 is one of those accessories that becomes indispensable once you recognize the install friction it removes. A 24-pack gives you genuine flexibility—not just one or two magnets for a pilot, but enough inventory to cover a real multi-site rollout or to keep a truck stocked for field adjustments. The lifetime warranty is straightforward: no gotchas, no time limits.
Technical Highlights:
- Ferrous metal surface requirement: This is the critical constraint. If your site is predominantly aluminum conduit, stainless steel frames, or composite structures, the MM24 will not work. Steel beams, metal roof decking, and standard structural columns work fine. Verify your infrastructure type before committing.
- 24-unit quantity: Deployed across a typical mid-size warehouse or small campus, this is a realistic working stock. You won't be reordering every other week, which keeps logistics simple and site costs predictable.
- Reusability across installations: Unlike adhesive mounts or one-time brackets, magnets remain viable indefinitely. If you're rotating equipment between facilities or testing coverage before permanent installation, the MM24 becomes a durable capital asset, not a consumable.
Deployment Considerations:
- Load capacity per magnet is not published in available documentation. This is a real gap if you're mounting anything heavier than a standard dome camera. Get specific holding-force ratings from the manufacturer before committing to vertical or high-vibration applications.
- Corrosion sensitivity is the gotcha in humid or salt-air environments. Without protective coating or weather-sealed enclosures, magnets degrade visibly in 12–18 months outdoors. Indoor industrial (warehouses, factories) is where the MM24 shines; outdoor or coastal is a secondary use case at best.
Deploy the MM24 for rapid prototyping, commissioning test positions, and retrofit scenarios where you cannot drill into existing structure. It's equally valuable for integrators who need to validate coverage before the customer commits to permanent mounts. In warehouse automation, where racks and conveyor frames are the default infrastructure, magnetic sensor mounting saves installation labor and eliminates structural concerns—a legitimate operational win.
