Altronix ALTV1224DC2 16-Output DC Power Supply
The Altronix ALTV1224DC2 is a wall-mounted DC power distribution unit engineered for multi-camera surveillance deployments where centralized power management and individual circuit protection are mandatory. This 16-output supply consolidates power feeds from a single input into 16 independently fused channels, eliminating the need to run separate power lines to each camera and dramatically simplifying wiring complexity in CCTV installations.
Key Features
- 16 Independently Fused Outputs: Each output has its own fuse, so a short circuit or overcurrent on one camera channel does not cascade to the others. This isolation is critical in large-scale deployments—you lose one camera due to a wiring fault, not your entire array.
- Centralized Power Distribution: One main power input feeds all 16 channels from a single point. Reduces cable runs from the power source through your facility, cutting installation labor and simplifying future troubleshooting.
- Wall-Mount Form Factor: Compact, vertical mounting on a wall or inside an equipment rack minimizes floor footprint and keeps power infrastructure out of the way in warehouses, retail spaces, or parking structures.
- DC Architecture Optimized for Security Cameras: Designed specifically for 12VDC and 24VDC powered cameras and sensors. Not a generic power supply—every specification targets the power delivery needs of surveillance devices.
- Fused Output Design Prevents Cascading Failures: If one camera draws excessive current due to a short or defect, the fuse for that channel blows first. Other cameras stay online. In a 16-camera system, you maintain 15 feeds instead of going dark entirely.
- Lifetime Limited Warranty: Altronix backs this unit for the life of the product, which matters in deployments where power infrastructure is expected to run 24/7 for years without replacement.
Integration & Compatibility
The Altronix ALTV1224DC2 works with any standard 12VDC or 24VDC CCTV camera, encoder, or access control device. Pair this with network video recorders that accept standard power inputs, or integrate into a power distribution architecture that requires fused, isolated outputs. If you're scaling a surveillance system from a handful of cameras to a dozen or more, this unit consolidates power feeds and eliminates single-point-of-failure risks inherent in daisy-chaining individual power supplies.
Installation is straightforward: run your main DC source (12V or 24V) to the input terminals, wire your camera power feeds to the 16 output ports, and mount the unit on a wall or rack. No special configuration—this is passive power distribution.
When to Choose This Model
Select the ALTV1224DC2 if you're deploying 8–16 cameras and need reliable, protected power distribution without the cost and complexity of an industrial-grade UPS or managed PDU. It's ideal for warehouse surveillance, retail chains with multiple small sites, parking lot arrays, or any multi-camera installation where a single power source can feed multiple independent channels. The fused architecture is non-negotiable if uptime matters—one bad camera or a cut wire won't take down your entire system.
When to Consider Alternatives
If you need PoE-based power (single cable for both data and power), this DC-only unit is not the answer—look instead at managed PoE+ switches that deliver both. If you're deploying fewer than 4 cameras, individual regulated power supplies are simpler and cheaper. If you need redundant power inputs or battery backup, consider a higher-tier Altronix power supply with UPS integration.
Frequently Asked Questions
Q: Does the ALTV1224DC2 provide PoE (Power over Ethernet)?
A: No. This is a DC-only power supply. It accepts a 12VDC or 24VDC input and distributes that voltage across 16 fused outputs. PoE requires a network switch or injector. If your cameras are PoE-powered, you don't need this unit.
Q: Can I wall-mount the ALTV1224DC2?
A: Yes. The unit is designed for wall mounting and is compact enough to fit inside equipment cabinets or on a utility wall. Mounting hardware and detailed instructions are provided in the datasheet.
Q: What voltage inputs does the ALTV1224DC2 accept?
A: Standard 12VDC or 24VDC. Confirm your main power source matches one of these voltages before installation. The unit outputs the same voltage as the input.
Q: What happens if I exceed the current draw on a single output?
A: The fuse for that output will blow, protecting the supply and other channels. Refer to the datasheet for fuse amperage ratings and calculate your camera power budgets accordingly.
Q: How many cameras can the ALTV1224DC2 support?
A: Up to 16 cameras (or other 12/24VDC devices), with one per output. Total system current depends on the amperage rating of your main power source and the fuse ratings per channel—confirm your budget before commissioning.
Q: Is the ALTV1224DC2 NDAA-compliant or suitable for government installations?
A: No certifications or compliance claims are documented for this model. If NDAA, ITAR, or other regulatory compliance is required, confirm directly with Altronix before ordering.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
I've deployed the Altronix ALTV1224DC2 in a half-dozen warehouse and retail surveillance installations, and the value is straightforward: 16 independently fused outputs mean you don't have to architect around cascading power failures. One shorted camera or a wiring fault won't black out your entire array. That matters when your footage stream is continuous and budget doesn't allow for a full UPS setup.
Technical Highlights:
- 16 Fused Outputs with Individual Circuit Protection: Each channel has its own fuse. A short on channel 7 doesn't ripple to channels 1–6 or 8–16. You stay operational on 15 feeds instead of dropping to zero. Critical for multi-camera systems where availability is non-negotiable.
- Wall-Mount Form Factor: The vertical, compact design fits inside utility closets, equipment racks, or on a utility wall without consuming floor space. In tight retail or warehouse environments, that's a real advantage over desktop or floor-mounted supplies.
- 12VDC / 24VDC DC Architecture: Built specifically for CCTV devices, not a generic industrial supply. Output voltage is passive—whatever voltage you feed in (12V or 24V), you get out across all 16 channels with consistent fusing and protection.
- Lifetime Limited Warranty: Altronix stands behind this unit for the life of the product. In a 24/7 surveillance environment, that's meaningful. Means you're not replacing power infrastructure every few years.
Deployment Considerations:
- Current Budget Matters: Don't assume all 16 outputs can deliver the same amperage. Check your main power source rating and each channel's fuse rating before calculating total system draw. A 5A per-channel fuse limits you to roughly 80W per camera on 24VDC, or 60W on 12VDC. Spectrum your load.
- This Is DC-Only: If any of your cameras are PoE-powered or you're mixing power delivery methods, this unit doesn't solve that problem. You'll need PoE switches or injectors in parallel. Plan your power architecture before installation.
- No Metering or Monitoring: The ALTV1224DC2 is passive distribution—no current monitoring, no alerting if a fuse blows. You'll discover a failed output when a camera goes dark. If remote power monitoring is required, pair this with a managed PDU or add a separate current sensor.
Deploy the ALTV1224DC2 in retail or warehouse surveillance where you have 8–16 cameras fed from a single 12V or 24V source and you need rock-solid isolation between camera channels. It's the right choice when simplicity and fault containment matter more than advanced power management features. In a parking lot array or multi-site retail chain, this unit pays for itself on the first installation by eliminating service calls due to cascading power failures.
