Vertiv VC-RF-0010 Aisle Containment Fixed Roof Panel
Overview
The Vertiv VC-RF-0010 is a 600mm × 900mm (approximately 2 ft × 3 ft) fixed roof panel designed for hot- or cold-aisle containment systems in data center environments. A solid, non-adjustable panel in this footprint closes gaps above cabinet rows where a rigid, permanent closure is the right answer — no moving parts, no airflow bypass, no maintenance overhead. If you are building out a contained aisle and need a fixed fill panel at this module size, the VC-RF-0010 is the component to specify.
The panel ships in black, matching standard Vertiv aisle containment hardware so the finished installation presents a consistent appearance. At 600mm wide and 900mm deep, it covers one standard 600mm cabinet column across a 900mm row depth — the common footprint in Vertiv containment system configurations.
Key Features
- Fixed 600mm × 900mm panel: covers one standard cabinet column at full 900mm depth without adjustment hardware — less to install, nothing to drift out of alignment over time.
- Black finish: matches Vertiv aisle containment framing and adjacent panels so the overhead closure looks intentional, not patched together from mismatched components.
- Rigid, non-moving construction: no hinges, no sliders — appropriate for positions where the overhead run is permanent and maintenance access is not required above that section.
Integration & Compatibility
The VC-RF-0010 (often searched as VC RF 0010) is designed for use within Vertiv's Vertiv aisle containment system lineup. It is intended as a fixed fill module alongside adjustable panels, light panels, and framing components in the same family. Verify your aisle layout and row configuration against the Vertiv containment system documentation before ordering — panel module counts depend on cabinet width and row depth selections. For other aisle containment panels and accessories, review the full category. If your installation requires airflow management planning, consult a data center infrastructure layout guide before finalizing panel counts.
Frequently Asked Questions
Q: What are the exact dimensions of the VC-RF-0010?
A: The VC-RF-0010 is 600mm wide × 900mm deep (approximately 2 ft × 3 ft). This covers one standard 600mm-wide cabinet column at a 900mm row depth.
Q: Is the VC-RF-0010 adjustable or fixed?
A: It is a fixed panel — non-adjustable. Use it where a permanent overhead closure is needed and maintenance access above that section is not required.
Q: What color is the VC-RF-0010?
A: Black, consistent with standard Vertiv aisle containment framing components.
Q: Can I mix VC-RF-0010 fixed panels with adjustable panels in the same containment row?
A: Vertiv's aisle containment system is designed to accommodate multiple panel types within the same row. Fixed panels like the VC-RF-0010 fill positions where adjustment is not needed, while other module types handle variable spans or access points.
The VC-RF-0010 is the fixed-panel module in Vertiv's aisle containment system, sized at 600mm × 900mm — a single cabinet column width at standard row depth. When you are laying out an aisle containment project and certain overhead positions will never need access, fixed panels like this one are the right call: no mechanical complexity, no alignment drift, and a cleaner finished installation than using adjustable panels everywhere.
Technical Highlights:
- 600mm width: matches the standard single-cabinet column footprint, so panel counts map directly to cabinet counts without fractional modules.
- 900mm depth: covers the full standard row depth in one piece — no seams, no gaps, no bypass leakage at mid-row joints.
- Fixed (non-adjustable) construction: eliminates the mechanical components that adjustable panels require — fewer parts to install, nothing to loosen or shift under vibration over the equipment lifecycle.
Deployment Considerations:
- Map your fixed versus adjustable panel positions before ordering — once installed, fixed panels do not accommodate repositioning without removal. Positions above cable management trays or PDU access points should use adjustable or hinged panel types instead.
- The VC-RF-0010 is a fill component; it does not include framing, end-of-row doors, or mounting hardware. Confirm compatibility with your specific Vertiv containment frame generation before placing an order.
The VC-RF-0010 is the right specification for positions in a permanent, fully-built-out hot- or cold-aisle containment row where overhead access is not required — high-density colocation rows and enterprise data halls with stable cabinet configurations are the primary use case.
