Vertiv VC-RF-0030 Aisle Containment Roof 2FT Duct Extension
Overview
The Vertiv VC-RF-0030 is a 600mm (approximately 2-foot) black roof duct extension plate designed to lengthen aisle containment enclosures in datacenter infrastructure deployments. When a standard containment roof section falls short of fully bridging the gap between your cabinet tops and the overhead plenum or CRAC return, this extension closes that gap — eliminating bypass airflow that undermines cooling efficiency. At 600mm depth, the VC-RF-0030 (often searched as VC RF 0030) is sized to match Vertiv's aisle containment system geometry, keeping the roof plane continuous without field fabrication or makeshift filler panels.
Key Features
- 600mm Depth: The 600mm extension depth is matched to standard Vertiv aisle containment roof module dimensions — no cutting, no shimming, no custom fab work on the data center floor. This matters when you're commissioning containment in a live environment where every hour of disruption costs money.
- Black Finish: The black finish integrates visually with the Vertiv aisle containment lineup, maintaining a consistent appearance across the containment structure. Aesthetics matter less than airflow, but a consistent finish also signals proper component selection to auditors and facilities teams.
- Extension Plate Design: Designed as an extension plate rather than a full roof module, the VC-RF-0030 is the right component when you need incremental reach — not a full-width replacement. Use it where your row layout leaves a gap that a standard-length module cannot cover.
Integration & Compatibility
The VC-RF-0030 is a Vertiv aisle containment component. For proper fit and sealing performance, pair it with compatible Vertiv containment roof sections, end panels, and door assemblies from the same product family. If your deployment mixes cabinet depths or uses non-standard row spacing, confirm dimensional fit before ordering — the 600mm depth is a fixed parameter. Consult Vertiv's aisle containment configuration documentation to validate compatibility with your specific row geometry and datacenter cooling layout.
Frequently Asked Questions
Q: What depth is the Vertiv VC-RF-0030?
A: The VC-RF-0030 has a depth of 600mm (approximately 2 feet), designed to extend aisle containment roof sections in standard Vertiv containment configurations.
Q: What colour is the VC-RF-0030?
A: The VC-RF-0030 is finished in black, consistent with the Vertiv aisle containment product line.
Q: Is the VC-RF-0030 a full roof module or an extension?
A: It is an extension plate — intended to add incremental length to an existing aisle containment roof, not to replace a full roof module.
Q: Will the VC-RF-0030 work with non-Vertiv containment systems?
A: This component is designed for the Vertiv aisle containment system. Compatibility with third-party containment structures cannot be confirmed from available evidence — verify dimensions against your system's specifications before ordering.
The VC-RF-0030 is a straightforward component, but its 600mm fixed depth means site geometry has to be confirmed before you pull the trigger — I've seen containment projects stall because an extension plate ordered from a spec sheet didn't match the actual row spacing on the floor.
Technical Highlights:
- Fixed 600mm Depth: Matches Vertiv's standard aisle containment roof geometry — no field modification required when row spacing aligns with spec.
- Extension Plate Format: Adds incremental roof coverage rather than replacing a full module, which keeps material cost low when only a short gap needs bridging.
- Black Finish: Consistent with Vertiv containment aesthetics — relevant when facilities teams conduct visual audits of containment integrity.
Deployment Considerations:
- Measure your actual gap before ordering. The 600mm depth is fixed — there is no field-adjustable overlap on an extension plate, so a short measurement means a gap in your containment seal.
- Confirm this part is compatible with your specific Vertiv containment family variant; Vertiv produces multiple containment generations and not all roof components are cross-compatible.
Best fit for a hot-aisle or cold-aisle containment retrofit in a datacenter row where standard roof sections leave a short coverage gap — particularly in mixed-depth cabinet deployments where the row geometry doesn't divide evenly into standard module lengths.
