Middle Atlantic RP9AM2CTCGY Floor Box Cover Kit

Overview

The Middle Atlantic RP9AM2CTCGY is a single-service floor box cover kit from the Ratchet-Pro line, built to finish out an in-floor power/AV drop with a clean, walkable gray cover plate. It bundles the cover, an adapter ring, and a concentric plug sized for 1-1/4 to 2-inch openings — the pieces you need to close out a single-service floor box without hunting down a separate adapter ring or plug from a different vendor. At 1.00 lbs, it's a lightweight finishing component, not a structural box, so plan on pairing it with the actual floor box enclosure it's rated to cap.

Key Features

• Concentric plug, 1-1/4" to 2": The stepped concentric design lets one plug adapt to multiple conduit or grommet opening sizes, so you're not stocking a separate plug for every box variation on a job — one part covers the common range.
• Adapter ring included: The ring lets the RP9AM2CTCGY mate to compatible single-service floor box bodies, which matters when the box opening and the cover plate aren't a direct match out of the package.
• Gray finish: A neutral gray cover blends into most conference room and office flooring schemes better than a stark white or black plate, which is the detail that gets noticed (or complained about) after install.
• Single-service configuration: Built for one device pass-through (power or AV, not a combo multi-gang layout), which keeps the footprint small for point-of-use drops at a single table or lectern location.
• TAA compliant: Meets Trade Agreements Act sourcing requirements, which matters directly if this is going into a GSA schedule or federally funded integration job where non-compliant hardware gets rejected at procurement review.
• 2-Year warranty: A defined two-year coverage period on the cover kit, so you're not guessing at replacement costs if the ratchet mechanism or plug fails under normal use.
• Lightweight footprint (1.00 lbs): Easy to hand-carry and stage on a job site alongside other floor box hardware without adding meaningful weight to a parts kit.

Integration & Compatibility

The RP9AM2CTCGY is designed to close out a single-service floor box opening as part of Middle Atlantic's broader furniture and floor box accessory line — it's the cover-and-plug half of the assembly, not the in-floor box itself. Confirm the receiving floor box's opening size falls within the 1-1/4" to 2" concentric plug range before ordering, since a mismatch there is the most common reason a cover kit gets returned. If you're specifying a full floor box solution for a conference room or training space, review the broader furniture accessories category alongside Middle Atlantic's connectivity hardware to make sure the box, cover, and cable pass-through components are all matched from the same family. For projects that also involve in-wall or under-table AV routing, a PoE and cable planning guide is worth reviewing before finalizing floor box placement, since power and data pathways often share the same penetration point.

What's in the Box

• 1x Ratchet-Pro single-service floor box cover, gray
• 1x Adapter ring
• 1x Concentric plug (1-1/4" to 2")

Frequently Asked Questions

Q: Is the RP9AM2CTCGY TAA compliant?

A: Yes, the RP9AM2CTCGY carries TAA (Trade Agreements Act) compliance, making it suitable for GSA schedule and federally funded procurement.

Q: What size openings does the concentric plug fit?

A: The included concentric plug is sized for 1-1/4" to 2" openings, letting one plug adapt to that range of floor box configurations.

Q: What's the warranty on the RP9AM2CTCGY?

A: It carries a 2-year warranty from Middle Atlantic.

Q: How much does the RP9AM2CTCGY weigh?

A: The cover kit weighs 1.00 lbs.

Q: Does the RP9AM2CTCGY include the floor box itself?

A: No — it's a single-service cover kit consisting of the cover, adapter ring, and concentric plug, intended to finish out a compatible floor box enclosure, not replace it.

Q: What color options does this cover come in?

A: This listing (RP9AM2CTCGY) is the gray finish version of the Ratchet-Pro single-service cover.

Ted Perry

The RP9AM2CTCGY is one of those parts that looks trivial until you're standing over an open floor box with the wrong plug in hand. The concentric plug on this kit covers 1-1/4" to 2" openings, which is the range that catches most single-service box variations on a typical conference room retrofit.

Technical Highlights:

• Concentric plug, 1-1/4"-2": One plug adapts across that opening range instead of forcing you to stock multiple fixed-size plugs for different box models.
• 1.00 lbs cover kit: Light enough to keep a handful staged in a parts bin for punch-list days without adding real weight to your kit.
• TAA compliance: Clears the sourcing bar for GSA and federal jobs where non-TAA hardware gets flagged during procurement review, no exceptions.

Deployment Considerations:

• Confirm the receiving floor box opening against the 1-1/4"-2" plug range before you order — this is a cover-and-plug kit, not the box itself, so it has to match an existing or planned enclosure.
• The 2-year warranty is standard coverage for a mechanical cover assembly; it's not rated for anything beyond normal foot-traffic use on a finished floor.

Spec this for a single conference table or lectern power/AV drop where you need a gray, code-compliant finish plate and you already have (or are ordering) a compatible single-service Middle Atlantic floor box — it's the finishing hardware, not the enclosure.