Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Code Blue
SKU: 40520
Code Blue 40520 Wall Mount Hardware Kit 5-Pk
- 5-pack supplies hardware for multiple mounting points in a single order.
- Includes brackets, screws, and anchors for drywall, concrete, and masonry.
- Weatherproof fasteners support both indoor and outdoor Code Blue deployments.
$200.00 $173.99 Save $26.01 -
Code Blue
SKU: 40612
Code Blue 40612 Overhead Camera Mount
- Ceiling/overhead mount positions IP cameras for wide-angle surveillance coverage.
- Designed for compatibility with Code Blue IP camera systems for assured fit.
- Sturdy construction supports long-term reliability in commercial and industrial installs.
$1,310.00 $1,134.99 Save $175.01 -
Code Blue
SKU: 40618
Code Blue 40618 Camera Mount
- Mounts to CB1, CB2, CB4, CB5, CB6, CB9, and CBRT tower series enclosures.
- Supports wall and pole attachment points for outdoor pedestrian or vehicle-facing installs.
- Integrates with LS1000, LS2000, IP1500, and IP2500 VoIP communication platforms.
$1,310.00 $1,134.99 Save $175.01 -
Code Blue
SKU: 40789
Code Blue 40789 Camera Mount
- Mounting hardware designed specifically for Code Blue security system integration.
- Serves as a dedicated camera mount for professional surveillance installations.
- Replacement and accessory compatibility supports Code Blue ecosystem deployments.
$1,415.50 $1,038.99 Save $376.51 -
Code Blue
SKU: 41543
Code Blue 41543 CB 6-f Back Box Flat Black FME
6-frame rack-mount back box with PoE power and IP68 sealing
- PoE 802.3af powers multiple devices from standard network switches
- IP68 rating protects against dust and water in any environment
- 850nm infrared capability for low-light and night vision monitoring
$210.00 $180.99 Save $29.01 -
Code Blue
SKU: 41575
Code Blue 41575 Camera Mount
- Designed as mounting hardware for Code Blue security and surveillance systems.
- Serves as a compatible accessory component within existing Code Blue installations.
- Mounting hardware type simplifies hardware-level integration during system deployment.
$840.00 $727.99 Save $112.01 -
Code Blue
SKU: 41629
Code Blue 41629 Overhead Camera Mount Gasket (3 pk)
- Rubber gaskets seal the camera-to-mount interface, blocking water and dust ingress.
- Three-pack covers multiple deployments or supplies spares for future maintenance cycles.
- Designed for Code Blue overhead mounting systems; verify gasket diameter before ordering.
$39.00 $38.99 Save $0.01 -
Code Blue
SKU: 49111
Code Blue 49111 Overhead Camera Mount
- Ceiling-mount design enables straight-down or shallow-angle overhead camera positioning.
- Compatible with Code Blue CB1e, CB5sp, CB9, and CBRT camera models.
- Adjustable hardware supports post-install angle fine-tuning on drywall or concrete ceilings.
$1,252.50 $1,089.99 Save $162.51 -
Code Blue
SKU: CB2A00027
Code Blue CB2A00027 PoE Wall Mount Accessory
Wall-mount PoE accessory with IP68 sealing for Code Blue systems
- IP68-rated sealed housing withstands wet and dusty outdoor conditions
- Powers directly from 802.3af PoE—no separate power supply needed
- Wall-mounted design integrates with Code Blue PoE-enabled infrastructure
$2,870.00 $2,484.99 Save $385.01 -
Code Blue
SKU: CB2A00038
Code Blue CB2A00038 IP5000s PoE Wall Mount
IP68 wall-mount PoE device for outdoor and industrial networks
- IP68-rated protection handles wet, dusty, and demanding environments
- PoE 802.3af powered—no separate power infrastructure required
- Compact wall-mount form factor integrates into standard deployments
$2,625.00 $2,400.99 Save $224.01 -
Code Blue
SKU: CB2A00051
Code Blue CB2A00051 PoE Wall Mount IP68 Security Device
IP68 wall-mount PoE device for dusty and wet outdoor security
- IP68 rating withstands dust, moisture, and full submersion exposure
- PoE 802.3af powered—no dedicated electrical runs required
- Wall-mount design for industrial, commercial, and outdoor installations
$3,500.00 $3,200.99 Save $299.01 -
Code Blue
SKU: CB2A00054
Code Blue CB2A00054 CB2a 4B Wall Mount
- 0.078" stainless steel construction resists corrosion in demanding indoor/outdoor environments.
- Engineered specifically for CB2a 4B Help Points, ensuring precise fit and operational reliability.
- Wall-mount design supports standard building surfaces, simplifying installation for integrators.
$2,870.00 $2,472.99 Save $397.01 -
Code Blue
SKU: CB2A00079
Code Blue CB2A00079 PoE Wall Mount Accessory
IP68 PoE wall mount for outdoor surveillance without dedicated power
- PoE (802.3af) powered—no separate electrical infrastructure required
- IP68 rating withstands dust and water immersion in harsh environments
- Wired Ethernet connectivity integrates with standard PoE camera systems
$3,385.00 $3,094.99 Save $290.01 -
Code Blue
SKU: CB2A00129
Code Blue CB2A00129 2-Sided Emergency Wall Mount
Dual-sided emergency wall mount with PoE power and IP68 weather rating
- NEMA 4 / IP68-rated 0.078" stainless steel enclosure survives outdoor and washdown environments.
- Two-sided beacon configuration provides 360° alert visibility from a single wall mount point.
- Accepts 12–24V AC/DC or PoE input; compatible with LS1000 VoIP and IA4100 analog modules.
$2,900.00 $2,510.99 Save $389.01 -
Code Blue
SKU: CB2A00205
Code Blue CB2A00205 2-Sided Emergency Wall Mount
Dual-sided wall emergency signage, IP68 rated for indoor/outdoor use
- 2-sided display visible from both directions at entry points and exits
- IP68 weatherproof rating operates reliably in harsh indoor and outdoor conditions
- PoE 802.3af power eliminates need for separate electrical infrastructure
$2,650.00 $2,294.99 Save $355.01 -
Code Blue
SKU: CB2A00207
Code Blue CB2A00207 2-Sided Emergency Wall Mount
Dual-sided emergency signage with IP68 rating and PoE power
- 2-sided wall-mount design for visible messaging in corridors and stairwells
- IP68-sealed construction handles indoor and outdoor environments
- PoE (802.3af) powered—no dedicated electrical wiring needed
$1,400.00 $1,280.99 Save $119.01
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.















