Camera Housings
Showing Results for Camera Housings
-
Pelco
SKU: WASNX1V10L20M00
Pelco WASNX1V10L20M00 NX Washer 10L 230Vac
10L washer for Pelco NX housings, 30m hose, 230Vac solenoid pump
- 10-liter tank with 30-meter supply hose for ground-level reservoir placement
- Solenoid valve and manual pump control for optical clarity in harsh environments
- IP65 rated, designed for Pelco NX stainless steel camera housings with wipers
$1,962.72 $1,401.99 Save $560.73The item has been added -
Pelco
SKU: WASNX2V10L20M00
Pelco WASNX2V10L20M00 NX Series Camera Washer
10L washer system for NX stainless housings with 30m supply hose
- 10-liter tank capacity with 30-meter hose for pole-mount installations
- 24 Vac solenoid valve with manual pump for controlled lens cleaning
- IP65-rated for coastal and high-contamination outdoor environments
$1,962.72 $1,401.99 Save $560.73The item has been added -
Pelco
SKU: WASNX3V10L20M00
Pelco WASNX3V10L20M00 NX Camera Washer System
Automated lens washer for NX stainless housings in salt-spray environments
- 10-liter capacity with 30-meter hose for extended operation and flexible placement
- Solenoid valve and manual pump for controlled on-demand washing cycles
- 120 Vac powered; compatible with NX wiper/washer nozzle assemblies
$1,962.72 $1,401.99 Save $560.73The item has been added -
Add to Cart The item has been addedPelco
SKU: WBLA
Pelco WBLA Ball Joint Wall Bracket for Camera Housings
Surface-mount wall bracket with ball joint for Pelco camera housings
- Integrated ball joint allows angular aiming adjustments post-installation
- Rigid metal construction supports secure mounting on solid surfaces
- Eliminates need to reposition anchors for camera fine-tuning
In stock · Ships same business day$795.06 $567.99 Save $227.07The item has been added -
Pelco
SKU: WCWGC
Pelco WCWGC Corner Mount Adapter Large Housing
Heavy-duty 90-degree corner mount adapter for Pelco camera systems
- Converts flat-surface brackets to corner configuration for dual-wall coverage
- Large housing variant supports heavier camera assemblies and housings
- NDAA Section 889 compliant for government and secure deployments
$106.05 $105.99 Save $0.06The item has been added -
Pelco
SKU: WEXTUB30
Pelco WEXTUB30 Antistatic Water Pipe Extension 30m
30m antistatic water extension for Pelco camera housing washers
- 30-meter length routes pressurized water to remote lens cleaning nozzles
- Antistatic construction prevents static buildup near sensitive electronics
- Joinable design extends beyond 30m when paired with additional sections
$260.13 $185.99 Save $74.14The item has been added -
Pelco
SKU: WFWCA
Pelco WFWCA Column Mount Ball Joint Camera Housing
Column clamp with ball joint for post-install camera aiming
- IP66 sealed housing resists rain, dust, and washdown spray
- Ball joint allows horizontal and vertical aim without unbolting
- Secures to poles and columns; eliminates wall anchors or brackets
$109.12 $108.99 Save $0.13The item has been added -
PioneerPOS
SKU: 2JW-BH-SETV3
PioneerPOS CT18 Back Housing Pocket Set [P]ioneer - 2JW-BH-SETV3
- OEM back housing set restores CT18 enclosure integrity with zero fitment ambiguity.
- Designed exclusively for BayTrail-based CT18 terminals—confirm architecture before ordering.
- Complete pocket-and-clip set in white enables same-day housing repair, minimizing downtime.
$197.91 $196.99 Save $0.92The item has been added -
Posiflex
SKU: APEX-CAM-01
Posiflex APEX-CAM-01 Camera 5MP 1920 x 1080 Camera Housing
- 5MP sensor delivers 1920×1080 resolution for clear face-level transaction verification.
- USB interface simplifies integration into existing Posiflex APEX-series POS terminals.
- Bezel-mount housing eliminates cabling runs and holds aim in high-traffic checkout lanes.
$174.00 $173.99 Save $0.01The item has been added -
Speco Technologies
SKU: VCH401HBMT
Speco Technologies VCH401HBMT Traditional Camera Housing with Hea
IP66 outdoor housing with integrated heater and blower for year-round protection
- IP66-rated enclosure blocks dust and moisture for reliable outdoor perimeter deployments.
- Integrated heater and blower prevent condensation and sensor fogging in cold climates.
- Runs on 24VAC, fitting standard low-voltage surveillance power infrastructure.
$142.80 $141.99 Save $0.81The item has been added -
Speco Technologies
SKU: WMID8
Speco Technologies WMID8 Wall Mount for Ultra Intensifier Housing
Wall mount for Ultra Intensifier housing in fixed surveillance setups
- Direct-fit bracket for Speco Ultra Intensifier housing simplifies wall-mount deployments.
- At 1.5 lb and 9.5 × 8.4 × 4.4 in, it installs cleanly in tight or retrofit spaces.
- White powder-coated finish suits indoor and outdoor fixed-position surveillance installs.
$112.90 $111.99 Save $0.91The item has been added -
STI
SKU: KIT-M05101-EN
STI KIT-M05101-EN Red Housing Stopper II Series Fire Label
- Red polycarbonate housing prevents accidental or malicious fire call point activation.
- Optional integral sounder emits 120 dB alert when cover is lifted without authorization.
- Fits internal and external installations; mounts via four holes drilled with a 7mm bit.
$26.99The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-M06540-CR
STI Red Replacement Housing for Universal - KIT-M06540-CR
- Direct mechanical fit for Universal Stopper locks and strikes — no rewiring required.
- Runs on 9VDC, matching existing strike circuits with no power supply upgrade needed.
- Red color-coding enforces zone identification across multi-door or multi-building installs.
$25.99The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-13300NC
STI STI-13300NC Universal Stopper Intercom without Horn Housing
Two-way intercom for Universal Stopper access control, 24VDC flush mount
- 24VDC powered, integrates with standard access control power infrastructure
- Flush back box mounting keeps profile low and housing protected from impact
- Two-way audio communication compatible with Universal Stopper door systems
$76.99The item has been added -
STI
SKU: STI-7515A
STI STI-7515A Access Control Housing
- Dedicated lock/strike housing simplifies strike mechanism deployment in access control installs.
- Pre-marked hole locations streamline door frame modifications and electrical routing planning.
- Compatible with standard commercial lock/strike configurations for hardwired strike activation.
$170.99The item has been added -
STI
SKU: STI-7515F
STI STI-7515F Access Control Housing
- 94V-2 rated polycarbonate resists impact while keeping the protected device visible.
- Operates from -40°C to +121°C, covering outdoor and unheated industrial installs.
- Ships with mounting hardware and gaskets; integrates with STI-7510/7511 housings.
$159.99The item has been added
Camera Housings
Camera housings provide environmental protection for surveillance devices installed in outdoor or demanding conditions. Proper enclosure selection protects against weather exposure, temperature extremes, dust, and physical impact to maintain long-term system performance.
Plan Your Deployment
- Environmental exposure and weather rating requirements
- Operating temperature range considerations
- IP and impact protection standards
- Camera size and mounting compatibility
- Maintenance access and cable management planning
Camera Housings — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 176 working models of camera housings sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 0MP, 2MP, 8MP |
| IP Rating | IP66, IP68 |
| Connectivity | Wired |
| Power | PoE+, PoE, AC/DC |
| Type | Accessory, Box, Cable, Dome, IP Camera, Camera Housing |
| Durability | Vandal Resistant |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.