Geovision

SKU: 125-AVD2700-000

Geovision GV-AVD2700 (125-AVD2700-000)

• IP67/IK10 ratings support permanent outdoor and high-vandalism deployments.
• H.265 compression cuts bandwidth 40–60% versus H.264 on 24/7 recording.
• Six mount options and PoE 802.3af simplify retrofits with a single cable run.

Geovision

SKU: 84-BL15000-001U

Geovision GV-BL1500 IP Bullet CAM 1.3MP - 84-BL15000-001U

• SuperLowLux 1.3MP sensor delivers usable images in low-light corridors and parking structures.
• ONVIF compliance ensures drop-in integration with any compatible NVR or VMS platform.
• Wall and pole mount bullet form factor fits 802.3af PoE switches at a 13W power draw.

Geovision

SKU: GV-ERM-82

Geovision GV-ERM 251-erm-064

Expansion module for Geovision NVRs—add channels and storage capacity

• Centralizes up to 128 channels across GV cameras, DVRs, NVRs, and VMS on one console.
• Runs on 64-bit Windows 10, 11, Server 2016, and Server 2019 for flexible deployment.
• NAS integration lets you monitor storage capacity across all connected devices centrally.

Geovision

SKU: GV-ERM

Geovision GV-ERM GV-ERM Software 64-Channel Edge Recording

64-channel edge recording software for multi-site distributed surveillance

• Manages up to 64 simultaneous video streams across distributed edge recording nodes.
• ONVIF Profile S compatibility enables integration with multi-vendor IP camera deployments.
• Centralized management interface controls geographically dispersed sites from a single console.

Geovision

SKU: GV-FER5702

Geovision GV-FER5702 Tilting Wall Mount

Tilting wall mount for Geovision IP PTZ cameras indoors and out

• Tilting wall mount for indoor and outdoor IP PTZ camera install
• Adjustable mounting angle for varied site geometry constraints
• 1.15 lb wall or rack mount for IP PTZ camera deployment

Geovision

SKU: GV-FER5702-51

Geovision GV-FER5702 Tilting Wall Mount Bracket

Tilting wall mount bracket for Geovision cameras with adjustable vertical positioning

• Tilting mechanism allows vertical angle adjustment post-install without hardware replacement.
• Maintains camera's IP66 ingress and IK10 vandal resistance ratings in outdoor deployments.
• Compatible exclusively with GV-FER5702 5MP fisheye camera; one bracket required per unit.

Geovision

SKU: 400-IPSH300-V201

Geovision GV-IPSH30 V2.0 IP Camera Cable 400-IPSH300-V201

• Carries data and power over a single run, eliminating separate power pulls.
• V2.0 revision adds enhanced shielding for cleaner signals in mixed-tech environments.
• Built specifically for GV-IPSH30 series cameras to ensure pin-level compatibility.

Geovision

SKU: 140-POELC-000

Geovision Gv-Lc 140-Poelc-000 Poe Cable

• IEEE 802.3af compliant — delivers power and data over a single cable run.
• Eliminates separate power supplies at the camera, reducing conduit and labor.
• Designed for Geovision IP PTZ camera systems for confirmed compatibility.

Geovision

SKU: 110-MFD2501-4F2

Geovision GV-MFD2501-4F 2M Super LOW LUX 2.1MM - 110-MFD2501-4F2

• Super low-lux sensor delivers usable footage in dim spaces without IR hardware.
• 802.3af PoE powers the camera from standard switches — no PoE+ or separate power run.
• ONVIF-compliant H.264/H.265 output integrates with GV-series NVRs and third-party VMS.

Geovision

SKU: 51-MT20700-M001

Geovision Gv-Mount 207 51-MT20700-M001 Mount

• Engineered for Geovision IP PTZ cameras, ensuring proper load bearing under motor operation.
• Supports pole, wall, and ceiling installs, covering perimeter and facility-wide PTZ deployments.
• Minimal-fastener design reduces on-site assembly time and simplifies camera repositioning.

Geovision

SKU: GV-MOUNT 912FE/FER

Geovision Gv-mount 912 Power BOX Mount - GV-MOUNT 912FE/FER

• Integrates AC-to-camera power at the junction point, eliminating individual wall-wart supplies.
• Supports both wall and ceiling mounting for flexible placement in multi-camera deployments.
• Centralizes cable management within the enclosure to keep connections organized and concealed.

Geovision

SKU: 150-MT205-000

Geovision GV-MOUNT205 150-MT205-000 Wall Mount Bracket

• Supports both wall and rack installation from a single bracket, reducing SKU overhead.
• Compact 203×160 mm footprint fits standard mounting surfaces in tight deployments.
• Designed for Geovision camera systems, ensuring compatibility across your existing install base.

Geovision

SKU: GV-MOUNT211-2

Geovision GV-MOUNT211-2 GV-MOUNT211-2 Wall Mount Bracket Kit

Wall and rack mount bracket kit for Geovision DVR/NVR systems

• Supports wall, ceiling, pole, pendant, corner, and rack mounting for flexible deployment.
• Integrated junction box consolidates conduit entry via included PG21 connector, reducing exposed wiring.
• Kit includes drill template, screws, and anchors for precise, stress-free installation on first attempt.

Geovision

SKU: 150-MT420-000

Geovision GV-MOUNT420 150-MT420-000 Mount

• Stainless steel bracket holds Geovision readers firmly against vibration and contact.
• Supports RS-485 and PoE-connected access control devices in indoor and outdoor installs.
• Adjustable positioning simplifies alignment of readers and keypads at entry points.

Geovision

SKU: GV-MOUNT420-150

Geovision GV-MOUNT420 GV-MOUNT420 Mounting Bracket

Metal wall/ceiling bracket for Geovision surveillance cameras

• Supports wall, ceiling, pole, pendant, corner, and rack mounting from one SKU.
• Compatible with Geovision G-Series camera families including GV-Mount211 and GV-Mount506.
• Compact 6×6×4.5 in metal bracket ships with a 3-year warranty for indoor deployments.

Geovision

SKU: GV-MOUNT420

Geovision GV-MOUNT420 Pole Mount Bracket

Pole and rack mount bracket for Geovision IP PTZ cameras

• Supports both pole and rack mount configurations for flexible PTZ deployment.
• White powder-coat finish rated for outdoor and indoor environments.
• Compact 5×5×4 in footprint at 0.89 lb simplifies installs with a 3-year warranty.