ACTi · DVCOMMIS-1DAY

ACTi DV Series Installation On-site Commissioner - DVCOMMIS-1DAY

N on-site installation commissioner service for ACTi DV Series surveillance deployments

• On-site field verification ensures DV Series deployment meets design specs before handoff.
• Covers firmware check, network config, recording, playback, and motion detection validation.
• Supports ONVIF-integrated third-party VMS environments alongside ACTi NVR configurations.

ACTi · DVREMOTE-REP

ACTi DV Series Remote - DVREMOTE-REP

Managing NVR playback and PTZ functions from across a control room or demo space becomes impractical with mouse-and-keyboard setups

• Dedicated IR remote restores NVR playback and PTZ control without a keyboard.
• Compatible with ACTi DV Series and STV+ Series displays; batteries included.
• Handheld form factor cuts operator reach and speeds incident review workflows.

ACTi · DVVACCUM-REP

ACTi DV Series Replacement Vaccum Suction Tool - DVVACCUM-REP

Replacement vacuum suction tool for the ACTi DV Series camera mounting system

• Replacement suction tool keeps ACTi DV Series dome housings secure during positioning.
• Reduces risk of optic or housing finish damage when installing or removing dome cameras.
• Clean, dry suction cup surfaces maintain grip strength for repeatable, reliable alignment.

ACTi · DV-108GO

ACTi DV-108GO - Flat - 1920 X 1080 - 108INCH - 3840-7680 HZ

Professional security product designed for commercial deployments where reliability matters

• Flat-panel form factor simplifies rack or wall integration in commercial deployments.
• 1920×1080 native resolution delivers full HD clarity for monitoring and video review.
• 108-inch display size supports large-format visualization in command center installs.

ACTi · DV-18023HD

ACTi DV-18023HD All-in-one Panel

• All-in-one enclosure combines reader and controller, eliminating separate wiring runs.
• Single hardware module reduces discrete components, lowering installation labor and cost.
• Integrates with ACTi access control ecosystem for unified credential and event management.

ACTi · DVINSTALL-PRO-LIFT

ACTI Dvinstall-Pro-Lift

Professional-grade installation accessory designed to support deployment and maintenance workflows in surveillance environments

• Enables safe, controlled equipment positioning during elevated surveillance installs.
• Reduces worker fatigue and fall risk on multi-story deployment and maintenance tasks.
• Compatible with ACTi professional surveillance platforms for hands-free field service.

ACTi · EFM02120

ACTi EFM02120 Full Metal Jacket 2.0 Ipad Mini Enclosure

N enclosure / housing component designed for field service replacement and new installations requiring an exact OEM-fit component

• OEM-fit enclosure ensures the host product retains its original ingress rating.
• Genuine factory-sourced part prevents warranty voidance on the host device.
• Documented MPN EFM02120 streamlines BOM entry and depot service references.

ACTi · CTI-EAMOD-DARM

ACTi Enhanced Android Module - Dual Core ARM - CTI-EAMOD-DARM

N Android-based dual-core ARM processing module designed to extend or replace processing capabilities in compatible ACTi surveillance systems

• Dual-core ARM processor adds Android edge-computing capability to compatible ACTi platforms.
• Module-slot installation requires no external wiring; host device supplies all power and data.
• Enables local Android app execution without replacing the host camera or encoder unit.

ACTi · ERE030220

ACTi Enterprise Cable Cover Accy BLK - ERE030220

Professional surveillance installations demand clean cable management that protects connections from tampering and environmental exposure while

• Black powder-coated finish matches ACTi enterprise camera housings for a clean look.
• Shields network cables and power connections from moisture ingress and tampering.
• Purpose-built fitment simplifies installation across multi-camera ACTi deployments.

ACTi · ERE030116

ACTi Enterprise Nanogrip Base Accy - ERE030116

Professional security product designed for commercial deployments where reliability matters

• ACTi-manufactured nanogrip base accessory engineered for commercial deployments.
• Sourced from US authorized distribution with manufacturer warranty intact.
• Fits ACTi ecosystem bill of materials for standardized, repeatable installations.

ACTi · ERE010220

ACTi Enterprise Tablet Lite Base BLK - ERE010220

Professional security product designed for commercial deployments where reliability matters

• ACTi Enterprise tablet lite base in black for commercial deployment
• Engineered for commercial install through ACTi distribution channels
• Drops into ACTi enterprise tablet mount and dock accessory architecture

ACTi · 185-01104

ACTi Epic Case Ipad 10.2IN Vesa Pipeline - 185-01104

Protective mounting case designed for 10.2-inch iPad tablets integrated into surveillance control room and field deployment setups

• Protective iPad 10.2 in mounting case with VESA pipeline mount
• Direct VESA attachment to surveillance control room arms and stands
• Drops onto standard 75 and 100 mm VESA pattern mounts

ACTi · EPR5A50088-000

ACTi EPR5A50088-000 Network Surveillance Component

Security product from ACTi, designed for professional security and surveillance applications

• PCAP touch technology enables precise, multi-touch interaction for control room deployments.
• HDMI, USB-C, USB, and Ethernet ports support flexible AV and network integration in one unit.
• Wall-mount interactive form factor simplifies indoor installation without additional mounting hardware.

ACTi · EPR8A50500-SQR

ACTI EPR8A50500-Sqr

Mobile display stand designed to mount and position large interactive flat panels up to 98 inches in professional and surveillance monitoring

• Mobile cart base enables display repositioning without fixed-mount installation.
• Supports displays up to 330 lbs, covering commercial panels in the 75–98 inch range.
• Height adjustment supports operator ergonomics across multi-shift control room deployments.

ACTi · EPR8A505DV-120

ACTi EPR8A505DV-120

Floor-standing mobile cart designed to transport and support 120-inch LED displays in temporary or semi-permanent installations

• Floor-standing mobile cart eliminates permanent wall or ceiling infrastructure.
• Cold-rolled and carbon steel frame delivers structural stability for 120-inch displays.
• Mobile casters enable repositioning across command centers and training rooms.

ACTi · EPR8A505DV-150

ACTi EPR8A505DV-150

Mobile cart stand engineered to support 150-inch LED displays in fixed-height deployments

• Floor-standing mobile design moves 150-inch LED displays across facilities without disassembly.
• Cold-rolled and carbon steel frame with polypropylene shell reduces structural failure points.
• Fixed-height configuration eliminates hydraulic complexity, cutting setup time at each deployment site.

ACTi · EPR8A50980-000

ACTi EPR8A50980-000 NEWLINE 98 Wall Mount

Motorized wall mount bracket designed for interactive flat panels up to 98 inches with 800x600mm mounting interfaces

• Motorized mechanism eliminates manual repositioning of displays up to 98 inches.
• Supports 800x600mm mounting interfaces for large-format interactive flat panels.
• Installs in wall or rack configurations, suiting control rooms and command centers.

ACTi · EPR8ADSXWM-435

ACTi EPR8ADSXWM-435 DSX Series Wall Mount

Low-profile wall mount designed for ACTi DSX series displays between 43 and 55 inches

• Low-profile wall mount keeps DSX series 43–55" displays flush for clean SOC installs.
• Supports portrait and landscape orientations to match your monitoring layout requirements.
• ADA-compliant installation suits shared control environments without added compliance work.

ACTi · EPR8ADSXWM-650

ACTi EPR8ADSXWM-650 65IN DSX Series Wall Mount

Low-profile wall mount engineered for 65-inch ACTi DSX series displays in surveillance control rooms and monitoring stations

• Low-profile wall mount keeps the 65-in DSX display flush, preserving rack and cable clearance.
• Supports portrait and landscape orientations for flexible operator station layout planning.
• Designed exclusively for ACTi DSX series 65-in displays, ensuring verified fit and safety compliance.

ACTi · EPR8ADSXWM-860

ACTi EPR8ADSXWM-860 86in DSX Series Wall Mount

Low-profile wall mount engineered for 86-inch DSX Series flat-panel displays

• Low-profile wall mount keeps 86-inch DSX Series displays tight to the wall, saving floor space.
• Supports both portrait and landscape orientations for flexible control room display configurations.
• ADA-compliant engineering meets accessibility standards required in security operations center installs.

ACTi · EPRCDTL-001

ACTI Eprcdtl-001

Professional security product designed for commercial deployments where reliability matters

• ACTi-engineered hardware designed for commercial-scale security deployments.
• Ships as genuine factory-new product with manufacturer warranty intact.
• Fits ACTi ecosystem for consistent commissioning and predictable parts availability.

ACTi · EPRCDTL-003

ACTI Eprcdtl-003

Professional security product designed for commercial deployments where reliability matters

• Genuine factory-new ACTi hardware with manufacturer warranty intact.
• Sourced through US authorized distribution, eliminating grey-market risk.
• Fits ACTi's documented ecosystem for consistent commissioning across sites.

ACTi · EPRCDTL-005

ACTI Eprcdtl-005

Professional security product designed for commercial deployments where reliability matters

• Genuine factory-new ACTi hardware with manufacturer warranty intact.
• Sourced through authorized US distribution, ensuring no grey-market risk.
• Fits ACTi's documented ecosystem for consistent commissioning on multi-site rollouts.

ACTi · EPRCSTL-001

ACTI Eprcstl-001

Surveillance-grade cable assembly designed to streamline field installations where reliable connectivity between cameras, recorders, and network

• Pre-terminated connectors eliminate field crimping, reducing installation time on deployment day.
• Designed for ACTi surveillance systems with RJ-45 and coaxial connectivity patterns.
• Factory-finished ends reduce risk of connector failures that degrade video or drop packets.

ACTi · EPRCSTL-003

ACTi EPRCSTL-003 Network Surveillance Component

When you're installing dome cameras in outdoor soffits, overhangs, or covered entryways, exposed junction boxes compromise the clean aesthetic your

• Stainless steel construction resists corrosion for lasting outdoor soffit installs.
• Recessed flush-mount design conceals junction boxes and cabling behind ceiling material.
• Compatible with ACTi dome housings, enabling camera access for service and adjustment.

ACTi · EPRCSTL-005

ACTI Eprcstl-005

Mounting and installation accessory designed to support ACTi surveillance camera deployments

• ACTi-native mounting hardware ensures mechanical fit across compatible ACTi camera models.
• Standardized form factor supports repeatable, consistent multi-camera rollout installations.
• Confirm camera model compatibility via ACTi documentation before deployment to avoid rework.

ACTi · ERE010230

ACTi ERE010230 Network Surveillance Component

Security product from ACTi, designed for professional security and surveillance applications

ACTi · CDS-MBLDS-EVOL-BAT

ACTi EVO Roll Digital Signage - 14+ Hour - CDS-MBLDS-EVOL-BAT

Battery pack designed for the ACTi EVO Roll mobile digital signage display

• Delivers 14+ hours of continuous runtime, eliminating dependency on AC power at site.
• Purpose-built for the ACTi EVO Roll system, ensuring direct dock-mount integration.
• Battery-powered design supports trade shows, pop-ups, and temporary perimeter deployments.

ACTi · CTI-STAND-FIXM

ACTi Fixed Mobile Stand - Solid Base With Shelf - CTI-STAND-FIXM

Fixed mobile stand with a solid base and integrated shelf — designed to stabilize and position surveillance cameras in temporary or semi-permanent

• Solid base provides anti-tip stability for indoor deployments without drilling.
• Integrated shelf accommodates power supplies or network switches below the camera.
• Tool-minimal assembly enables fast repositioning in temporary or semi-permanent setups.

ACTi · CTI-MOUNT-FIXS

ACTi Fixed Tabletop Stand With Wall Mount (for - CTI-MOUNT-FIXS

Dual-purpose mounting accessory that works as both a tabletop stand and a wall bracket

• Dual-purpose design serves as tabletop stand or wall bracket, reducing mount SKUs needed.
• Compatible with ACTi fixed camera bodies; not suitable for PTZ or motorized camera heads.
• Tabletop and wall configurations support flexible indoor deployment without ceiling infrastructure.

ACTi · CTI-MOUNT-FIXW-V3

ACTi Fixed Wall Mount - Thin (for USE With - CTI-MOUNT-FIXW-V3

Fixed wall-mount bracket designed for ACTi compact cameras where space is tight or aesthetic footprint matters

• Thin-profile wall bracket minimizes visual footprint in space-constrained installations.
• Fixed-position mount suits indoor and covered outdoor deployments without pan-tilt complexity.
• Reduced profile lowers wind loading, practical for exterior soffit and high-wind corridors.

ACTi · CTI-MOUNT-FIXW-43

ACTi Fixed-height Wall Mount FOR 7043XE - CTI-MOUNT-FIXW-43

Fixed-height wall mount engineered specifically for the ACTi 7043XE camera

• Engineered exclusively for the ACTi 7043XE, ensuring precise mechanical fit.
• Fixed-height design prevents post-installation angle drift, cutting maintenance callbacks.
• Compatible with drywall, concrete, and metal stud substrates for flexible deployment.

ACTi · FLEX

ACTi Flex - LCD Monitor - Flat - 3840 X 2160 - 27INCH - 8MS

27-inch flat LCD monitor with native 3840×2160 (4K) resolution and 8ms response time

• Native 3840×2160 (4K) resolution delivers 163 ppi for evidence-grade surveillance detail.
• 8ms gray-to-gray response eliminates ghosting on live feeds and forensic playback.
• VESA 100×100 pattern supports standard monitor arms for flexible control room mounting.

ACTi · CTS-HC100-CLMT

ACTi Folding Clip Style Screen TOP Mount FOR - CTS-HC100-CLMT

Folding clip-style top mount bracket designed to secure surveillance display screens in ceiling installations

• Folding clip design enables compact ceiling deployment without wall or pedestal mounts.
• Engineered specifically for ACTi HC100-series surveillance displays for assured alignment.
• Overhead mount frees floor and wall space in control rooms, lobbies, and NOC environments.

ACTi · EPR8A50500-FRK

ACTi Fork-based Mobile Stand - EPR8A50500-FRK

Fork-based mobile stand designed to mount and position large interactive displays in commercial and institutional environments

• Supports displays up to 98 inches and 330 lb for large-format panel deployments.
• Fork-based mobile frame enables safe relocation between rooms without wall penetrations.
• Minimal assembly required; no ceiling or wall mounting — reduces installation time on-site.

ACTi · EFM02413

ACTi Full Metal Jacket 3.0 FOR Ipad 9.7INCH (2017) - EFM02413

Protective case designed for the iPad 9.7-inch (2017) model

• Engineered specifically for iPad 9.7-inch (2017) to ensure precise port and button alignment.
• Preserves access to charging ports and volume controls during active field deployments.
• Tool-free installation seats the tablet securely for vehicle transport and site visits.