Hikvision PC135 Pendant Cap for Dome Camera
The PC135 is a ceiling-mounted pendant cap accessory engineered to support Hikvision dome camera installations where a clean, integrated look matters. Built from aluminum alloy with surface spray treatment, it bridges the gap between structural ceiling support and the dome housing itself — a straightforward mechanical component that handles the weight distribution job so your camera stays level and secure.
Key Features
- Aluminum Alloy Construction: Aluminum offers a favorable strength-to-weight ratio for pendant mounting; the surface spray treatment resists corrosion in both dry indoor and outdoor environments, extending service life without heavy maintenance.
- Compact Profile (132 mm × 62 mm): Proportioned to fit standard Hikvision dome housings without excessive protrusion. Smaller pendant caps reduce ceiling clutter and work well in retail, office, and institutional settings where aesthetics matter alongside security function.
- Lightweight at 190 g (6.7 oz): Low weight means reduced load on ceiling anchors and simpler installation. In multi-camera rollouts, lighter hardware adds up — fewer reinforced mounting points required across the facility.
- Neutral White Finish: Blends into most interior ceilings and works equally well with light or neutral wall colors. White is a practical choice for retail and corporate environments where gun-metal or black might stand out visually.
- Designed for Pendant Mounting: The cap is purpose-built for ceiling-drop installations, not wall or under-eave positions. Verify your dome model is compatible with pendant-style caps before ordering — some Hikvision domes use ball mounts or other bracket styles instead.
- Corrosion Resistance: Spray treatment on the aluminum reduces oxidation and maintains appearance over time. In salt-air or high-humidity environments, the treated surface helps avoid the white powdery corrosion (aluminum oxide) that untreated aluminum develops.
Compatibility & Installation
The PC135 is designed to work with Hikvision dome camera models that accept pendant cap mounting. Compatibility is camera-specific — not all Hikvision domes accept this cap. Before purchase, confirm your dome model number against the manufacturer's compatibility matrix or consult your integrator. Once paired with the correct camera, installation is straightforward: the cap mounts to the ceiling anchor, the dome threads or clips onto the cap base, and cable management routes down through the hollow pendant structure.
Integration with IP cameras in your surveillance network depends on the dome itself, not the cap. The PC135 is purely mechanical — it has no electronics, no power requirements, and no firmware.
Frequently Asked Questions
Q: Is the PC135 compatible with all Hikvision dome cameras?
A: No. Compatibility is model-specific. Always verify your dome model against Hikvision's compatibility documentation before purchasing. Some Hikvision domes use ball mounts or other bracket styles instead of pendant caps.
Q: Can I use the PC135 on a wall or in an under-eave position?
A: The PC135 is designed for ceiling-pendant mounting only. Wall-mount or corner installations require different bracket hardware.
Q: Will the aluminum coating handle outdoor environments?
A: The surface spray treatment provides corrosion resistance suitable for outdoor use, but it is not equivalent to stainless steel. In extreme salt-air, heavily polluted, or industrial-chemical environments, monitor the cap's finish over time.
Q: Does the PC135 require any tools or hardware to install?
A: The cap itself mounts via the dome's attachment mechanism. Ceiling anchors, fasteners, and cable routing hardware are site-specific and not included. Consult your installation plan and the dome's manual for exact requirements.
Q: What is the maximum weight the PC135 can support?
A: Weight capacity depends on the ceiling anchor and the dome camera's total mass. The cap itself is 190 g; the ceiling fastening system must be rated for the combined dome + cap + cable weight. Verify load rating with your structural engineer or integrator.
Q: Is there a difference between the PC135 and other Hikvision pendant caps?
A: Hikvision offers multiple pendant cap models, each optimized for different dome sizes and weight ranges. The PC135 is one standard option; check your dome's manual for the specified cap model to ensure correct fit and support.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The PC135 is a no-frills pendant cap — aluminum, 190 grams, white finish. If you're integrating a Hikvision dome into a ceiling-drop installation, this is the mechanical foundation that keeps the camera level and secure. The alloy construction with spray treatment handles typical indoor and outdoor humidity without special treatment, though it's not a replacement for stainless steel in salt-air or chemical-heavy industrial settings.
Technical Highlights:
- 132 × 62 mm Footprint: Scaled for standard Hikvision dome housings. A smaller pendant reduces visual clutter in retail and office ceilings where camera aesthetics factor into the approval process.
- 190 g Weight: Light enough that standard drywall anchors (rated 10–25 lbs) can handle it with the dome attached, assuming your dome itself is in the 1–2 lb range. Heavier domes (3+ lbs) demand reinforced ceiling anchors or structural backing.
- Surface Spray Treatment: Corrosion resistance is present, not bulletproof. The coating slows oxidation but does not eliminate it entirely. In dry indoor environments, no maintenance. In coastal or high-humidity outdoor settings, expect some patina over 2–3 years.
Deployment Considerations:
- Compatibility is Non-Negotiable: The PC135 is not a universal cap. Verify your dome model accepts this specific cap before purchase. Mixing incompatible caps and domes leads to poor fit, misalignment, and potentially unstable mounting.
- Ceiling Anchor Quality Matters: The cap itself is solid, but the installation only works if your ceiling anchor can handle the load. Drywall anchors fail; structural backing succeeds. Do not rely on a single toggle bolt in hollow drywall for a long-term deployment.
- Cable Routing: The pendant structure allows cable to run down the inside or alongside the cap. Plan cable dress-out before installation to avoid kinks and pinch points that can damage ethernet or power lines.
Deploy the PC135 when you are installing a compatible Hikvision dome in a ceiling-pendant position and need a lightweight, corrosion-resistant mechanical bridge between the anchor point and the camera body. Typical settings: retail ceilings, office bullpens, institutional hallways, and parking structures where pendant mounting is the standard. Skip this cap if your dome requires a different bracket style — forcing a mismatch wastes time and creates a weak point in your physical security infrastructure.
