Vertiv ITA2-08KRT2087UN 8/10kVA 208V Rack UPS with VRLA Battery and Network Card
Overview
The Vertiv Liebert ITA2-08KRT2087UN is an 8/10kVA, 208V rack-mount uninterruptible power supply designed for IT infrastructure, security systems, and network-critical environments where runtime continuity is non-negotiable. Part of the scalable Vertiv Liebert ITA2 UPS line, this unit ships with an integrated VRLA (valve-regulated lead-acid) battery module and a network card — meaning it arrives ready to monitor, alert, and gracefully shut down managed systems without requiring separate accessory purchases.
The ITA2-08KRT2087UN targets mid-density server rooms, edge deployments, and security control rooms running 208V distribution. If your rack environment is already on 208V single-phase and you need a rack UPS that steps in cleanly during utility outages or voltage sags, this unit belongs on the short list.
Key Features
- 8/10kVA Power Rating at 208V: The dual-mode 8/10kVA capacity at 208V means you can load this unit at different thresholds depending on runtime requirements — heavier loads shorten runtime, lighter loads extend it. Right-sizing to 80% of rated capacity is the standard practice here, leaving headroom for inrush on startup.
- Integrated VRLA Battery: Valve-regulated lead-acid chemistry requires no water maintenance and handles sealed-cabinet installations without ventilation exceptions. VRLA batteries are the standard for rack UPS deployments in conditioned data spaces — expect typical battery replacement cycles of 3–5 years depending on ambient temperature and discharge frequency.
- Included Network Card: The bundled network management card enables SNMP and web-based monitoring without an additional accessory cost. This matters in managed environments where facilities or IT teams need remote visibility into load levels, battery health, and runtime estimates — and where graceful OS shutdown on power events is required.
- 208V Single-Phase Input: Native 208V input matches standard North American 3-phase-derived branch circuits in server rooms, eliminating step-down transformer losses and keeping the installation straightforward in properly provisioned rack environments.
- Rack-Mount Form Factor: The ITA2 series is purpose-built for standard 19-inch rack enclosures. Verify rack unit (U) depth before ordering — ensure adequate clearance for cable management and front-panel access.
- Scalable ITA2 Platform: The ITA2 family spans 5kVA through 20kVA in 208V variants, so if your load grows, you're moving within a consistent platform rather than migrating to a new product line. Runtime extension modules (if supported) and power distribution units pair naturally with this unit in a full rack power architecture.
Integration and Compatibility
The ITA2-08KRT2087UN integrates into managed infrastructure via its included network card, supporting SNMP-based monitoring compatible with most enterprise NMS platforms. Vertiv's Liebert IntelliSlot architecture is the standard management interface for this product family — verify NMS vendor compatibility for your specific monitoring stack before deployment. For security operations centers and surveillance backrooms running NVRs, access control servers, or video management workstations on 208V circuits, this unit provides the power continuity layer that keeps recording and access enforcement running through utility interruptions.
Frequently Asked Questions
Q: What is the power rating of the ITA2-08KRT2087UN?
A: The ITA2-08KRT2087UN is rated at 8/10kVA at 208V single-phase input.
Q: Does the ITA2-08KRT2087UN include a network management card?
A: Yes. This model ships with an integrated network card for SNMP and web-based remote monitoring and managed shutdown capability.
Q: What battery type does the ITA2-08KRT2087UN use?
A: It uses VRLA (valve-regulated lead-acid) sealed batteries, which require no water maintenance and are suitable for enclosed rack environments.
Q: Is the ITA2-08KRT2087UN compatible with standard 19-inch racks?
A: Yes, the Liebert ITA2 series is designed for standard 19-inch rack-mount installation. Confirm rack unit depth and clearance requirements before installation.
Q: Can the ITA2-08KRT2087UN be used in a security or surveillance environment?
A: Yes. The 8/10kVA capacity and 208V input make it well-suited for powering NVRs, access control servers, and video management workstations in security control rooms and edge equipment rooms.
Q: How does the ITA2-08KRT2087UN fit within the broader Liebert ITA2 product family?
A: The ITA2 family covers 5kVA, 8/10kVA, and 15/20kVA at 208V, so the ITA2-08KRT2087UN sits in the mid-range. If your load exceeds the 8/10kVA threshold, step up to the 15/20kVA variant within the same platform.
The ITA2-08KRT2087UN's dual 8/10kVA rating at 208V is the detail I lead with when talking to integrators sizing power for a mid-density security rack. That flexibility lets you operate at 8kVA with longer battery runtime or push to 10kVA when load demands it — without swapping hardware. It's a practical range for a rack running an NVR stack, a PoE switch tier, and an access control server simultaneously.
Technical Highlights:
- 8/10kVA Dual Rating: Operating at the lower 8kVA threshold extends battery runtime for the same VRLA bank — useful in environments where even a short outage must bridge a generator start sequence.
- Included Network Card: Most competitive units at this capacity sell the management card separately. Having it bundled means your SNMP integration and graceful-shutdown scripts can be configured from day one, not after an additional procurement cycle.
- VRLA Battery Chemistry: Sealed VRLA requires no electrolyte maintenance and poses no off-gassing concern in enclosed equipment rooms — it's the right call for security closets and server rooms without dedicated battery ventilation.
Deployment Considerations:
- Confirm your branch circuit is provisioned for 208V single-phase before racking this unit — it is not a 120V device, and connecting it to the wrong voltage will damage it immediately.
- VRLA battery lifespan degrades significantly above 25°C ambient; if your equipment room runs hot, plan for shorter replacement intervals and budget accordingly.
The ITA2-08KRT2087UN is the right pick for a security operations center or edge IT closet already on 208V distribution that needs mid-range UPS capacity with network management out of the box — not a unit you configure later, but one that's operational from the first power-on.
