Middle Atlantic 6ATC2PGY Prewired Poke-Through Floor Box with Surface Cover

Overview

The Middle Atlantic 6ATC2PGY is a prewired poke-through floor device from the Evolution 6AT2 Series, designed for in-floor power and data distribution in commercial conference rooms, open office environments, and AV integration projects. The 6ATC2PGY ships factory-prewired, so you're not terminating connections on-site — the internal wiring is done, which reduces installation time and eliminates field-wiring errors in finished-floor deployments. If you're spec'ing floor boxes for a Middle Atlantic rack or AV infrastructure build, this unit fits squarely in the recessed poke-through category where a clean surface cover matters as much as connectivity.

The surface cover style means the assembly sits flush-to-grade with a visible cover plate — appropriate for hard-floor environments (concrete, tile, raised access flooring) where a recessed or hinged door would be a trip hazard or aesthetics requirement. The gray finish blends with standard commercial carpet tile and hard-surface flooring without calling attention to itself.

Key Features

• Factory Prewired: Internal wiring is completed at the factory before shipment. On large multi-box deployments — conference centers, trading floors, open-plan offices — this eliminates per-box termination time on the job site. Expect measurably faster rough-in compared to field-wiring equivalent boxes.
• Surface Cover Style: The surface cover sits at floor level rather than recessing below the slab. This is the correct choice for environments where the cover must be accessible without tools and where a recessed pocket would collect debris or present a cleaning challenge. Choose this style over a hinged cover when the floor finish is tile or polished concrete.
• TAA Compliant: The 6ATC2PGY meets Trade Agreements Act requirements, making it eligible for U.S. federal government, GSA schedule, and other government-contract procurements. If your project has a TAA clause, this box qualifies — verify against your contract's specific country-of-origin requirements.
• Compact Body Footprint (7.25" × 7.25" × 16.25" deep): The 7.25-inch square body drops into the floor cavity. At 16.25 inches deep, confirm your floor assembly — structural slab thickness plus plenum depth — has the clearance before spec'ing. Shallow concrete pours or low-profile raised-floor panels may require a different depth variant.
• Overall Rough Opening: 11.5" × 11.5" × 19.5": The full installed envelope is 11.5 inches square by 19.5 inches deep. Plan your core cut and floor cavity accordingly. On retrofit projects into existing slabs, this is the dimension that drives coring costs — confirm before bid.
• Gray Color Finish: The gray cover coordinates with standard commercial finishes and is the common neutral for mixed hard-floor and carpet-tile environments. If the project specifies a different finish, verify color availability in the 6AT2 Series rather than assuming a field-paint solution will hold up under foot traffic.

Integration & Compatibility

The 6ATC2PGY is part of Middle Atlantic's Evolution 6AT2 Series of poke-through floor devices. These units are designed for integration into commercial AV and low-voltage infrastructure builds — conference rooms, boardrooms, training facilities, and open-plan office deployments where floor-fed power and data distribution is the architectural requirement. The prewired configuration is compatible with standard commercial electrical rough-in practices; coordinate with your electrical contractor on the power feed side before installation.

For broader AV infrastructure planning, this floor box pairs naturally with Middle Atlantic rack and enclosure systems when the room design calls for both rack-mounted AV equipment and in-floor connectivity at the table or presentation position. If your project also involves structured cabling, review the cable management category for pathway products that complement in-floor distribution.

TAA compliance makes this unit a direct fit for government facility AV integrations — courtrooms, federal office buildings, military briefing rooms — where country-of-origin documentation is a contract deliverable. Keep the product documentation on file for compliance submittals.

Frequently Asked Questions

Q: Is the Middle Atlantic 6ATC2PGY TAA compliant for federal government projects?

A: Yes. The 6ATC2PGY is TAA compliant, making it eligible for U.S. federal procurement, GSA schedule purchases, and projects with Trade Agreements Act contract clauses. Verify your specific contract's country-of-origin requirements against the product documentation.

Q: What does