Middle Atlantic 6CT2GYTR 6-Inch EVO Flush Cover Assembly

Overview

The Middle Atlantic 6CT2GYTR is the flush cover assembly for the 6CT Evolution series poke-through device — the finish component that closes out a floor or surface cutout once cabling and power infrastructure is in place. At 7.75 in wide × 7.25 in tall (19.7 × 18.4 cm), the 6CT2GYTR sits flush with the surrounding surface rather than projecting above it, keeping conference tables, collaborative work surfaces, and open-plan floors unobstructed. If you are specifying or replacing covers for an existing 6CT Evolution poke-thru installation, this is the part to order.

Key Features

• Flush Profile (7.75 × 7.25 in): The cover lies flat with the mounting surface rather than raising above it — relevant in conference rooms and training spaces where a protruding pop-up assembly would interfere with chairs, equipment, or sightlines.
• Tamper-Resistant Receptacle Type: TR-rated outlets require a simultaneous two-prong insertion to open the internal shutters, reducing accidental contact risk in environments with public access or young users — a common requirement in education and healthcare facility specs.
• Gray Finish: Matches standard commercial surface finishes. Verify against your installed surface material before ordering if color consistency is a hard requirement.
• TAA Status — Non-Compliant: The 6CT2GYTR is confirmed TAA non-compliant. If your project falls under GSA schedules, federal procurement requirements, or any contract clause mandating TAA compliance, do not specify this part — select a TAA-compliant cover variant instead.

Integration & Compatibility

This cover assembly is designed for the Middle Atlantic 6CT Evolution poke-through series. Confirm your installed base unit model against Middle Atlantic's 6CT Evolution compatibility matrix before purchasing — cover dimensions and mounting patterns vary across the poke-thru product line. This cover is not interchangeable with older or non-Evolution 6CT units without verification. For broader floor box and poke-through device options, review the full category to match your surface type and port configuration requirements.

Frequently Asked Questions

Q: Is the Middle Atlantic 6CT2GYTR TAA compliant?

A: No. The 6CT2GYTR is confirmed TAA non-compliant. Federal or GSA-contract projects requiring TAA compliance should select an alternate cover variant.

Q: What are the dimensions of the 6CT2GYTR cover?

A: The cover measures 7.75 inches wide by 7.25 inches tall (19.7 cm × 18.4 cm).

Q: What color is the 6CT2GYTR?

A: Gray.

Q: What receptacle type does the 6CT2GYTR use?

A: Tamper-resistant (TR-rated), which requires simultaneous dual-prong insertion to open the outlet shutters — a common requirement in educational and healthcare environments.

Q: Will this cover fit any 6CT poke-through unit?

A: The 6CT2GYTR is designed for the 6CT Evolution series specifically. Compatibility with non-Evolution 6CT units is not verified from available evidence — confirm against Middle Atlantic's product matrix before ordering.

Marty Allison

The 6CT2GYTR is the flush cover for Middle Atlantic's 6CT Evolution poke-through line — the part that determines how the finished installation looks and whether it passes a facility inspection. The flush profile (7.75 × 7.25 in) is the detail that matters most in conference and collaboration spaces: a pop-up cover that projects above the table surface creates snagging points and clearance issues with equipment; this cover eliminates that.

Technical Highlights:

• Flush Cover Style: At 7.75 × 7.25 in, the assembly sits level with the surrounding surface — no raised housing to interfere with rolling equipment, chairs, or AV carts moving across the floor or table.
• Tamper-Resistant Receptacle: TR outlets are required by NEC in certain occupancy types (schools, pediatric healthcare, childcare). Specifying a TR cover upfront avoids a costly retrofit if the inspector calls it out post-installation.
• TAA Non-Compliant (confirmed): This is a hard stop for any government, military, or federally funded project with a TAA clause. Verify contract requirements before committing to this part number.

Deployment Considerations:

• The 6CT2GYTR is a 6CT Evolution-series-specific cover — mounting pattern and cutout dimensions are matched to that platform. If you are replacing a cover on an older non-Evolution 6CT unit, measure the existing cutout and verify fit before ordering.
• Gray is the only verified finish for this SKU. If your surface is black, white, or a custom laminate, confirm Middle Atlantic's available color variants for the 6CT Evolution cover family rather than ordering gray and painting — paint adhesion on plastic covers is inconsistent and voids the finish.

The 6CT2GYTR is the right specification for new 6CT Evolution installations in corporate conference rooms, university classrooms, and hospitality AV builds where a flush, TR-rated finish is required and TAA compliance is not a contract condition.