QNAP PWR-ADAPTER-60W-A01 60W External Power Adapter
Overview
The PWR-ADAPTER-60W-A01 is a 60W external AC power adapter from QNAP, designed to supply regulated DC power to compatible QNAP devices where an internal PSU is not included or a replacement adapter is needed. At 60W, it covers the steady-state and peak draw of lower-wattage QNAP NAS units and network appliances without requiring a rackmount or internal power supply slot — a practical fit for desktop-class deployments on workgroup NAS, small office units, or networking gear that ships adapter-powered.
Compatibility
This adapter is intended for QNAP devices that specify a 60W external adapter. Verify your specific model's power requirements against QNAP's hardware compatibility documentation before ordering — connector type, voltage, and polarity must match. This part number is a genuine QNAP replacement; third-party adapters with mismatched voltage or connector specs can damage the host device or void the hardware warranty. Confirm compatibility with QNAP's full QNAP product line or the specific unit's datasheet.
Installation Notes
Ensure the wall outlet and any surge protector or UPS in the path is rated to handle the adapter's input requirements. Route the DC cable to avoid sharp bends at the barrel connector — stress at the connector joint is the most common failure point on external adapters. If deploying in a rack-adjacent environment alongside other power and UPS equipment, secure the adapter cable to prevent accidental disconnection during maintenance.
