CyberPower P704URC1 600V 4FT Power Cord

Overview

The CyberPower P704URC1 is a 600V-rated power cord assembly measuring 4 feet in length with a standard 5-15P connector. Built for surveillance installations, network closets, and security equipment deployments where reliable AC power delivery is non-negotiable, this cord handles the voltage and connector requirements of UPS systems and power distribution units without derating or thermal stress. The white jacket aids visual identification in busy equipment racks.

The P704URC1 ships with a 1-Year Limited warranty and $200,000 Connected Equipment Coverage — meaningful protection if a power fault propagates to downstream devices. This coverage applies across the 50 U.S. states, Puerto Rico, and Canada, removing ambiguity about where your warranty applies.

Key Features

• 600V Voltage Rating: Supports standard three-phase and single-phase industrial and commercial power environments without de-rating. Handles both 120V and 240V deployments in North American facilities — a single cord type that covers most surveillance and security infrastructure setups.
• 4-Foot Length: Bridges equipment to wall outlets or PDU (power distribution unit) sockets in typical 19-inch rack configurations and floor-mounted UPS installations. Long enough for flexibility, short enough to avoid coiled cable bundles that trap heat and invite EMI.
• 5-15P Connector: Standard NEMA 5-15P plug ensures compatibility with any grounded three-prong North American outlet. No adapter required — plug directly into wall sockets, surge protectors, or power-conditioned distribution units.
• $200,000 Connected Equipment Coverage: If a power event damages downstream devices (NVRs, switches, cameras, access control panels) connected through this cord, the warranty reimburses up to $200K in equipment replacement. This incentivizes proper power infrastructure and gives facility managers measurable risk transfer.
• 1-Year Manufacturer Warranty: Covers defects in materials and workmanship across all 50 U.S. states, Puerto Rico, and Canada. Clear geographic scope eliminates confusion about regional availability and support paths.
• White Jacket: High-visibility conductor insulation simplifies circuit tracing and asset identification in crowded equipment closets and server racks — reduces the likelihood of accidentally unplugging the wrong device during maintenance.

Integration & Compatibility

The P704URC1 integrates with any standard 120/240V North American power infrastructure. Pair it with CyberPower UPS units, power distribution units, surge suppressors, and conditioned power strips to isolate surveillance and security equipment from mains transients and voltage sags. The 600V rating means it supports industrial-grade power environments where facility-wide three-phase power is present, even if the immediate outlet is single-phase 120V.

Deploy this cord in network closets, server rooms, surveillance equipment racks, and access control installations where you need a replacement or supplemental power connection that won't introduce noise or voltage drop. The white color and standard 5-15P connector make it easy to inventory and swap without confusion.

What's in the Box

1x CyberPower P704URC1 600V 4-foot power cord with 5-15P connector (white jacket).

Frequently Asked Questions

Q: What does the $200,000 Connected Equipment Coverage actually cover?

A: The coverage reimburses repair or replacement costs for devices damaged by power faults (surge, spike, brownout, or blackout) that occur through this cord connection. Equipment must be directly powered by or connected through the P704URC1. Check the full warranty terms for specific exclusions and claim procedures.

Q: Can I use the P704URC1 in a 240V installation?

A: Yes. The 600V rating supports both 120V and 240V single-phase circuits. Do not use in three-phase delta or wye installations without consulting an electrician — voltage compatibility depends on your facility's specific power distribution design.

Q: Is the P704URC1 suitable for outdoor surveillance installations?

A: No. This is an indoor power cord. For outdoor installations, use appropriately rated outdoor-duty cords with UV-resistant jackets and IP67 end seals. Never run an indoor cord to exterior equipment.

Q: What warranty coverage applies if the cord fails in Puerto Rico or Canada?

A: The 1-Year Limited warranty explicitly covers all 50 U.S. states, Puerto Rico, and Canada. Service and replacement procedures may vary by region — contact the manufacturer to confirm local support channels.

Q: How does the P704URC1 compare to standard household extension cords?

A: Household extension cords typically lack the 600V rating, equipment coverage insurance, and warranty guarantees required in commercial surveillance and security deployments. The P704URC1 is engineered and warranted for continuous duty in 24/7 security infrastructure.

Q: Is this cord compatible with all CyberPower UPS models?

A: The 5-15P connector fits any UPS or power distribution device with a standard three-prong outlet. Verify your UPS model accepts a 5-15P input connector before purchase — some older or specialized units may use different connectors.

Ted Perry

The P704URC1 is a straightforward but often-overlooked component — a 600V-rated power cord with 5-15P connector that belongs in every surveillance equipment closet and UPS replacement-parts inventory. What makes this cord different from a hardware-store extension cord is the $200,000 Connected Equipment Coverage and the explicit 1-Year warranty across all North American markets. When you're protecting NVRs, access control panels, and network switches from power faults, this warranty coverage is real risk transfer — not marketing language.

Technical Highlights:

• 600V Rating: Handles both 120V and 240V single-phase circuits without de-rating. Industrial-grade voltage capacity means it won't introduce thermal stress or voltage drop in facilities running mixed power architectures — a single cord type for multiple deployment scenarios.
• 4-Foot Length: Balances reach and manageability in 19-inch racks and floor-mounted UPS installations. Short enough to avoid coiled cable heat traps; long enough to bridge typical outlet-to-equipment distances without adapters.
• $200,000 Connected Equipment Coverage: If a power surge or fault damages downstream devices (NVRs, cameras, switches, access panels) connected via this cord, warranty reimburses up to $200K in replacement costs. This is genuine equipment protection, not a standard extension-cord feature.

Deployment Considerations:

• Indoor use only — do not extend this cord outdoors. Outdoor surveillance installations require UV-resistant, weather-rated power cords with sealed connectors (IP67 minimum).
• Verify your UPS or power distribution device accepts a standard 5-15P connector before purchase. Older or specialized industrial UPS units may use proprietary inputs that won't accept this plug type.

The P704URC1 belongs in surveillance network closets, server rooms, and security equipment racks where you're running 24/7 infrastructure and can't afford power-related downtime. Pair it with a surge-protected PDU or conditioned UPS input, and you've invested $200K in equipment protection for a few dollars.