ELO Touch 6 inch pole mount kit for I-series and - E047458

ELO Touch E047458 6 Inch Pole Mount Kit

Overview

The ELO Touch E047458 is a 6-inch pole mount kit designed to install I-series and M-series monitors on standard mounting poles. Use this when you need to position a display vertically on a pole-mounted structure—typical in outdoor kiosks, digital signage installations, or industrial control stations where wall or ceiling mounting isn't practical. The 6-inch length provides moderate standoff from the pole, reducing wind loading while keeping the display accessible for servicing.

Compatibility

This kit is compatible with ELO Touch I-series monitors and M-series monitors. Verify your specific monitor model against the I-series and M-series product families before ordering. The mount accommodates standard pole diameters; confirm pole OD matches the kit's receiving socket (typically 1 to 1.5 inches for commercial installations).

Installation Notes

Pole mounting requires secure fastening to prevent drift or rotation under wind or vibration. Ensure the mounting pole is rated for the monitor's combined weight (display plus bracket). For outdoor installations, apply corrosion-resistant sealant to all fastener contact points if the bracket is not stainless steel. Check local wind load requirements and building codes before final installation. Tighten all fasteners firmly but do not over-torque—damage to threaded inserts is difficult to repair.

What's in the Box

• 1x 6-inch pole mount bracket
• Mounting fasteners (hardware kit)