Panduit FY9TP77A005M005 5M Single-Mode 12-Fiber ST Pre-Terminated Trunk Cable
Overview
The Panduit FY9TP77A005M005 is a 5-meter (16.4 ft) single-mode, 12-fiber pre-terminated trunk cable from the Panduit QuickNet HD Flex line. Designed for structured cabling environments where installation speed and repeatable termination quality matter, this trunk ships factory-terminated with ST connectors on both ends — eliminating field splicing and the insertion-loss variability that comes with it. It targets fiber optic trunk assemblies deployments in data centers, telecommunications rooms, entrance facilities, and equipment distribution areas where pre-terminated infrastructure accelerates turn-up and reduces skilled labor hours on site.
At 5 meters, this assembly is sized for intra-rack or inter-rack runs in high-density data center rows, or for short-span connections between adjacent equipment rooms. ST connectors are a bayonet-style push-and-twist interface that remains common in legacy enterprise and institutional environments — if your patch panels and transceivers already use ST, this trunk drops straight in without adapter sleeves.
Key Features
- Factory Pre-Terminated ST Connectors: Both ends are terminated and tested at the factory under controlled conditions. On a structured cabling project, that means no field termination kits, no splice trays, and no rework on a mis-cleaved fiber — the assembly arrives ready to install.
- 5-Meter (16.4 ft) Single-Mode Fiber, 12 Fibers: Twelve single-mode fibers in a single trunk handle high-density aggregation links or parallel wavelength applications. Single-mode supports much longer reach than multimode when you eventually extend runs beyond the equipment room — investing in SM now avoids a recabling event later.
- QuickNet HD Flex Sub-Brand: The HD Flex platform is Panduit's high-density, flexible-jacketed trunk family. The flexible construction simplifies routing in congested cable trays and tight bend-radius zones behind patch panels where rigid trunks would stress the fiber.
- Pre-Terminated Infrastructure for Rapid Deployment: Per the application specification, this cable targets data centers, telecommunications rooms, entrance facilities, and equipment distribution areas that require fast, repeatable fiber infrastructure turn-up — reducing commissioning time versus field-terminated approaches.
- ST Interface Compatibility: ST connectors mate with legacy fiber patch panels, media converters, and transceivers across a wide installed base of enterprise and campus network equipment — a practical choice for environments mid-upgrade rather than full greenfield.
- Commercial-Grade Assembly: Sourced factory-new with no grey-market or parallel-import risk, ensuring the termination geometry and optical performance meet Panduit's production tolerances rather than an untested secondary-market assembly.
Integration & Compatibility
The FY9TP77A005M005 is compatible with any ST-interface fiber patch panel, media converter, or SFP transceiver module supporting single-mode fiber. It is well-suited for network infrastructure environments transitioning from legacy ST-based panels to higher-density aggregation while retaining existing fiber plant terminations. For greenfield installations using LC or MPO interfaces, review the broader Panduit QuickNet trunk family for connector variants that match your panel standard without adapters.
Frequently Asked Questions
Q: What connector type does the FY9TP77A005M005 use?
A: Both ends are terminated with ST (bayonet push-and-twist) connectors, compatible with ST-interface fiber patch panels, media converters, and transceivers.
Q: How many fibers does this trunk cable contain?
A: The FY9TP77A005M005 contains 12 single-mode fibers in a single trunk assembly.
Q: What is the physical length of this cable?
A: The overall length is 5 meters (16.4 feet), sized for intra-rack, inter-rack, or short-span equipment room connections.
Q: Is this a single-mode or multimode fiber assembly?
A: This is a single-mode (SM) assembly, supporting longer reach and wavelength flexibility compared to multimode alternatives.
Q: What environments is this trunk designed for?
A: Per Panduit's application specification, this trunk targets data centers, telecommunications rooms, entrance facilities, and equipment distribution areas requiring pre-terminated fiber infrastructure for rapid deployment.
The FY9TP77A005M005 is the trunk you reach for when you need a short single-mode run — exactly 5 meters — terminated with ST connectors and ready to pull from the box. In my experience, the value here is not the fiber itself but the factory termination: you get consistent geometry and tested insertion loss on all 12 fibers before the cable ever reaches the rack, which matters when you are commissioning multiple links back-to-back and cannot afford rework windows.
Technical Highlights:
- 12 Single-Mode Fibers: Twelve fibers in a single 5-meter trunk allow parallel aggregation links or breakout to individual SFP ports — enough fiber count for a full 10G/40G/100G parallel aggregation run at intra-rack distances.
- 5-Meter (16.4 ft) Length: This length is purpose-built for inter-rack or top-of-rack to patch panel spans in standard data center row geometries — long enough to route cleanly through overhead cable management, short enough to avoid excess coiled slack in the rack.
- ST Connector Interface: ST is a bayonet-latch connector that resists accidental disconnection better than some push-pull styles in high-vibration or frequently-accessed environments — relevant in telecom rooms with active maintenance traffic.
Deployment Considerations:
- Confirm your patch panel and transceiver modules are ST-interface before ordering — this trunk has no adapter on either end, and ST-to-LC or ST-to-SC adapters add insertion loss and a potential failure point. If your plant is already LC or MPO, select the matching Panduit QuickNet variant instead.
- Single-mode fiber requires single-mode-compatible transceivers and light sources — verify your SFP or media converter modules are SM-rated. Mixing SM cable with MM transceivers will result in a non-functional link, not just degraded performance.
This trunk is the right pick for a data center or telecom room where ST panels are already in place, the span is 5 meters or under, and you need 12 fibers terminated and tested before the installation crew arrives on site.
