Middle Atlantic 4IN Prewired Surface DUP SB - 4ATCP2RSB

Middle Atlantic 4ATCP2RSB Prewired Surface Duplex Poke-Thru Device

Overview

The Middle Atlantic 4ATCP2RSB is a prewired, surface-mount poke-thru device designed for clean, code-compliant power delivery through floors and work surfaces in commercial and government environments. Part of the 4AT Evolution series from Middle Atlantic's Middle Atlantic AV infrastructure line, the 4ATCP2RSB ships with one duplex outlet pre-installed in a satin brass cover — meaning you're not wiring in the field, you're just pulling wire and landing it. For integrators building out conference rooms, huddle spaces, or collaborative work areas, that distinction matters when you're commissioning a dozen identical stations.

TAA compliance is baked in from the factory, making this a straightforward specification for federal government sites, GSA schedules, and any project with NDAA or domestic-sourcing language in the contract. If your project documents call for TAA-compliant power infrastructure, the 4ATCP2RSB checks that box without a waiver or substitution conversation.

Key Features

• Prewired Single Duplex: The outlet module ships factory-installed — no field assembly required. On a multi-station rollout, eliminating per-unit wiring labor adds up fast, and it removes a common source of inconsistency between installers.
• Surface Cover Style: The surface-mount cover sits flush above the floor or table cutout rather than recessing below it. This is the right choice when the substrate is too thin for a fully recessed ring or when ADA clearance above the surface is a non-issue. If the finished surface needs a completely flush profile, a recessed variant would be the alternative.
• Satin Brass Finish: The satin brass color works in executive conference rooms, hospitality environments, and higher-finish commercial interiors where standard black or ivory devices read as utilitarian. Specify this finish when the architectural team has a material palette to match.
• TAA Compliant: Verified TAA compliance means the 4ATCP2RSB can be specified on federal, state, and municipal projects subject to the Trade Agreements Act without sourcing exceptions. Government integrators and AV consultants working on GSA or cooperative-contract vehicles should confirm TAA status on every infrastructure component — this one passes.
• Single Duplex Configuration: One duplex outlet per device. Right-sized for single-user workstations, individual collaboration nodes, or any location where you need exactly two receptacles at the surface. If the application calls for more outlets — data ports, USB charging, HDMI pass-through — Middle Atlantic's broader poke-thru device catalog includes multi-module configurations.
• 4AT Evolution Platform: The 4ATCP2RSB is part of Middle Atlantic's 4AT Evolution poke-thru family, which means replacement covers and modules are sourced from the same platform. Specifying a consistent product family across a campus or building simplifies long-term serviceability and spare-parts management.

Integration and Compatibility

The 4ATCP2RSB is designed for integration into floor boxes and work surface cutouts compatible with the 4AT Evolution mounting footprint. Verify the cutout dimensions against the device body before rough-in — the shipping dimensions of 21" x 8.25" x 8.25" reflect the packaged unit, not the installed device footprint, so consult Middle Atlantic's installation documentation for exact cutout and depth requirements.

For AV-over-IP deployments and boardroom builds where power infrastructure sits alongside AV connectivity components, the prewired surface module means the electrical portion of each station can be staged and tested before final trim-out, independent of the AV cabling schedule.

Frequently Asked Questions

Q: Is the 4ATCP2RSB TAA compliant?

A: Yes. The 4ATCP2RSB is verified TAA compliant, making it eligible for federal, state, and cooperative-contract projects that require Trade Agreements Act compliance.

Q: Does the 4ATCP2RSB come prewired, or does the outlet need to be installed on-site?

A: It ships prewired — the single duplex outlet module is factory-installed. Field assembly is not required; you connect the supply wiring and install the unit.

Q: What cover style does the 4ATCP2RSB use?

A: It uses a surface cover style, meaning the cover plate sits above the floor or work surface plane rather than recessing flush with it.

Q: What finish does the 4ATCP2RSB come in?

A: Satin brass. If your project requires a different finish, check Middle Atlantic's 4AT Evolution series for alternate color options.

Q: How many duplex outlets does the 4ATCP2RSB include?

A: One duplex outlet — providing two receptacles per installed device.

Q: Can the 4ATCP2RSB be used on a government contract vehicle?

A: Yes. TAA compliance is confirmed, so it can be specified on GSA schedules and other government procurement vehicles that require domestic or TAA-qualifying sourcing.

Ted Perry

The 4ATCP2RSB is Middle Atlantic's answer to a specific installation scenario: you need a surface-mount poke-thru with a single duplex outlet, factory-wired, in a finish that holds up in a finished commercial interior. The satin brass cover is the differentiator here — most integrators default to black or ivory, and on an executive conference table or a hospitality credenza, that reads wrong. If the architectural finish schedule calls for metal accents, this is the correct SKU to spec rather than substituting a finish-painted cover after the fact.

Technical Highlights:

• Prewired Factory Assembly: Outlet module is pre-installed at the factory — eliminates per-unit field wiring on multi-station deployments and removes variability between different installers on the same project.
• Surface Cover Style: Sits above the substrate plane; correct for applications where the work surface or floor finish is too thin to accommodate a fully recessed ring, or where the surface finish needs to remain continuous.
• TAA Compliance: Verified at the SKU level — directly supports specification on federal procurement vehicles, GSA schedules, and any project with Trade Agreements Act language without requiring a domestic-sourcing waiver.

Deployment Considerations:

• Confirm the rough-in cutout dimensions against Middle Atlantic's 4AT Evolution installation documentation before framing — the 21" x 8.25" x 8.25" shipping dimensions are packaged, not installed footprint.
• Surface cover style is not a substitute for a recessed device on projects requiring a fully flush, below-plane installation — if the spec calls for recessed, order the recessed variant from the 4AT family.

The 4ATCP2RSB is the right call for government conference rooms and executive AV builds where TAA compliance is a contract requirement and finish quality is part of the architectural specification — not a general-purpose power device for utility spaces.