Middle Atlantic 4IN Prewired Surface DUP CR SN - 4ATCP2CRSN

Middle Atlantic 4ATCP2CRSN Prewired Surface Dual-Service Controlled Receptacle Poke-Thru Device

Overview

The Middle Atlantic 4ATCP2CRSN is a prewired, surface-mount dual-service controlled receptacle poke-thru device engineered for clean, accessible power and AV connectivity at the floor level in conference rooms, boardrooms, and open office environments. The 4ATCP2CRSN ships factory-prewired, reducing field labor at rough-in and finishing stages — a practical advantage when you're commissioning multiple floor boxes across a large install.

The satin nickel finish integrates naturally into contemporary commercial interiors without drawing attention, and the surface cover style means installation does not require a flush-cut floor pocket — a meaningful difference in retrofit scenarios where cutting into finished flooring is cost-prohibitive or structurally restricted. TAA compliance makes this unit eligible for federal government projects and procurement vehicles with domestic sourcing requirements.

Middle Atlantic, part of the Legrand AV portfolio, produces this device for the Middle Atlantic line of power, AV infrastructure, and enclosure products — a catalog well-regarded among commercial integrators for consistent build quality and project-ready configurations. For broader floor-box and poke-thru options, browse the floor boxes and poke-thru devices category.

Key Features

• Factory Prewired: Arrives ready to connect — no field wiring of the receptacle assembly required, which compresses installation time on multi-outlet deployments and reduces the chance of wiring errors at the device level.
• Surface Cover Style: Mounts above the floor plane rather than requiring a flush cut-out. In retrofit or historic-floor environments where coring is not practical, this is the configuration to specify. It also simplifies future service access.
• Dual-Service Design: Accommodates two independent service channels — typically one power circuit and one low-voltage (AV/data) channel — keeping power and signal separated within a single floor unit. Fewer floor penetrations, cleaner cable routing.
• Satin Nickel Finish: A neutral metallic finish that reads professional in both light and dark interiors without the visual weight of polished chrome or the casualness of white plastic.
• TAA Compliant: Meets Trade Agreements Act requirements, making the 4ATCP2CRSN eligible for GSA schedule and federal procurement without additional sourcing justification.
• Controlled Receptacle Configuration: The controlled receptacle designation means switched or managed power delivery is part of the circuit design — useful where AV systems need to be powered down centrally or where energy management is a project requirement.

Integration & Compatibility

This device is designed to pair with compatible power management and AV distribution infrastructure. Verify rough-in conduit sizing and floor construction depth against the shipping dimensions (21" x 8.25" x 8.25") when planning the installation pathway. For projects requiring rack-mounted power control upstream of this device, consider Middle Atlantic power control units to close the system-level energy management loop.

Frequently Asked Questions

Q: Is the 4ATCP2CRSN TAA compliant?

A: Yes. The 4ATCP2CRSN is TAA compliant, making it eligible for federal government procurement and GSA schedule projects with domestic sourcing requirements.

Q: Does the 4ATCP2CRSN require a flush-cut floor opening?

A: No. The 4ATCP2CRSN uses a surface cover style, meaning it mounts above the floor plane without requiring a flush cut-out. This makes it well-suited for retrofit installations or environments where cutting into finished flooring is not practical.

Q: What finish is the 4ATCP2CRSN available in?

A: The 4ATCP2CRSN ships in satin nickel, a neutral metallic finish appropriate for contemporary commercial interiors.

Q: Is the 4ATCP2CRSN shipped prewired?

A: Yes. The 4ATCP2CRSN is factory prewired, reducing field labor during installation and minimizing on-site wiring at the device level.

Q: What are the shipping dimensions for the 4ATCP2CRSN?

A: The unit ships in a carton measuring 21" x 8.25" x 8.25" (533.4 x 209.6 x 209.6 mm). Plan receiving and staging space accordingly on large deployments.

Jerry Tildsen

The 4ATCP2CRSN's surface cover style is the specification that determines whether this unit belongs on your project or not. I've seen retrofits where specifiers defaulted to a flush poke-thru and then discovered mid-project that the floor construction depth or material wouldn't support the cut — switching to the 4ATCP2CRSN surface configuration at that point saves the schedule. If you're working in a building with raised access flooring, historic hardwood, or a concrete slab where coring is a structural conversation, start here.

Technical Highlights:

• Surface Cover: No floor penetration required for the cover itself — installs above the floor plane, dramatically simplifying retrofit scope and reducing trades coordination on finish floors.
• Factory Prewired: Device arrives assembled and wired, which matters on a 20-outlet conference center deployment where field wiring time per device adds up fast.
• TAA Compliance: Documented compliance means this unit moves through federal and state procurement without sourcing exceptions — specify it on government projects without a separate compliance memo.

Deployment Considerations:

• The shipping carton runs 21 inches long — verify receiving dock clearance and staging area on high-volume orders before delivery.
• Evidence does not confirm specific circuit amperage, receptacle count, or low-voltage module configurations; confirm these details with the project's electrical drawings and the Legrand AV product page before finalizing the specification.

This unit is the right call for conference room and boardroom AV buildouts in government facilities or commercial retrofits where TAA compliance is non-negotiable and floor cutting is off the table — particularly where the satin nickel finish needs to match existing AV cover plates already on the project.